Panduit H000X084HPM PXE™ Heat Shrink Wire Label Cassette

The Panduit H000X084HPM delivers continuous heat shrink labeling for heavy-gauge conductors from 8 AWG through 1 AWG—the wire sizes that power UPS systems, battery banks, and main distribution panels. This quick-load MP™ cassette combines 2.4 meters of white polyolefin label material with integral ribbon in a single cartridge, eliminating the fumbling and downtime that comes with separate consumables. Built for Panduit's MP100, MP200, and MP300 portable printers, it produces durable, UL 224 VW-1–rated identification that shrinks to a 2:1 ratio and stays legible through decades of thermal cycling and environmental exposure.

Key Features

8–1 AWG wire range — covers battery interconnects, UPS feeders, main panel conductors

2:1 shrink ratio polyolefin — conforms tightly to irregular cable shapes and terminations

22.5 mm (0.87") label width, 2.4 m continuous length per cassette

UL 224 VW-1 flame rating — meets NEC and facility electrical inspection requirements

Quick-load MP cassette — label material and ribbon integrated, swap in under 15 seconds

White base with thermal-transfer printing — high-contrast black text, resistant to UV and solvents

Compatible with MP100, MP200, MP300 portable label printers

Polyolefin heat shrink labels outperform vinyl and adhesive tags in high-temperature and high-vibration environments. The 2:1 shrink ratio lets the H000X084HPM tube slide easily over lugs and connectors before shrinking, then conforms tightly enough to prevent rotation or slippage on stranded cable. Once heat-activated, the material resists oils, battery electrolyte spills, and the thermal stress of conductors cycling from 40°C to 90°C in rack PDU and UPS cabinets. The UL 224 VW-1 vertical flame test certification is mandatory for most commercial electrical work and required on every AHJ inspection checklist—unlabeled or improperly rated labels trigger re-work and delay occupancy permits.

Large-gauge wire labeling is a recurring pain point during datacenter buildouts, battery-backup installations, and electrical room retrofits. The typical scenario: you're terminating 2 AWG feeders to a PDU or battery buss bar, you need to label both ends and mid-span service loops, but you're carrying a label printer loaded with thin-wire cassettes or adhesive tape that won't survive the environment. The H000X084HPM cassette eliminates that supply-chain gap. Because it's a quick-load MP cartridge, you swap from thin-wire labels to heavy-wire heat shrink without tools or threading—pull the old cassette, snap in the new one, resume printing. The integral ribbon means you're not tracking two separate consumables or discovering mid-job that you brought labels but forgot the ribbon.

This cassette is specified for permanent conductor identification where codes require heat shrink and inspection authorities check material ratings. It's the consumable that keeps UPS commissioning, generator tie-in projects, and battery-bank expansions moving without labeling delays or compliance failures. For integrators managing mixed-gauge projects—access control panels, camera PoE uplinks, and the 1 AWG feeders that power it all—the H000X084HPM ensures your portable printer handles the full wire range from a single field kit.