Panduit CJ688TGGR Mini-Com Cat 6 UTP RJ45 TG Jack Module (Green)

The Panduit CJ688TGGR is a Mini-Com Cat 6 UTP RJ45 jack module with tool-less TG termination, designed for commercial integrators running structured cabling in security, IT, and AV installations. Terminates 4-pair 22-26 AWG twisted pair cable without a punch-down tool, factory tested to exceed ANSI/TIA-568.2-D Category 6 and ISO 11801 Class E standards at swept frequencies up to 250 MHz. Each module is individually serialized for cable management documentation and drop-in compatibility with all Mini-Com modular patch panels, surface-mount boxes, and faceplates. Green housing for visual circuit identification in multi-system environments.

Key Features

• TG (tool-less) termination eliminates punch-down tools — wire insertion and IDC contact in one motion
• Exceeds Cat 6 channel requirements for 10GBASE-T up to 100 meters at 1-250 MHz swept frequency
• Rated for IEEE 802.3af/at PoE+ and proposed 802.3bt Type 3/4 PoE++ (up to 90W) over 2,500 mating cycles
• 100% factory tested — every module ships with verified performance, no field testing required for baseline assurance
• Individually serialized jack body for asset tracking and cable management documentation
• Green housing for visual identification — color-code by VLAN, application, or building system
• Drop-in compatible with Mini-Com patch panels (CPPL, NK series), faceplates (CWP, CFPE series), and surface-mount boxes

The TG termination mechanism is a spring-loaded IDC design: strip 4-pair cable to the jacket, fan out pairs into the color-coded wire guides, and press the cap — the retention arm seats conductors into gold-plated contacts and trims excess in one action. No impact tool, no blade alignment, no secondary inspection for conductor seating. Termination time runs under 60 seconds per jack for experienced installers. The module meets IEC 60603-7 mechanical durability at 2,500 insertions, sufficient for patching churn in access control panels, PoE camera drops, and VoIP endpoints over a 10+ year service life. Contacts are 50-microinch gold over nickel plating on phosphor bronze — corrosion resistance in plenum and above-deck installations where temperature and humidity cycling accelerate oxidation.

This module is sized for high-density patch panel applications: 0.71" height × 0.62" width fits 48-port 1RU panels with front-access termination (Panduit CPPL48WBLY and NK6PPG48Y). The Mini-Com form factor is cross-compatible with Panduit's angled and flat faceplates, so you can deploy the same jack inventory in wallplate, furniture, and consolidation-point configurations without stocking separate SKUs. Green housing supports visual circuit identification — common deployments include green for data VLANs, surveillance PoE networks, or building-system control wiring where installers need at-a-glance differentiation from voice (blue) or WAN uplinks (red). Module ships in cartons of 50, packaged individually to prevent IDC contamination during storage.

Compliance covers ANSI/TIA-568.2-D Category 6, ISO 11801 Class E, and ANSI/TIA-1096-A (PoE Performance for Balanced Twisted-Pair Cabling). UL 1863 Listed and UL 2043 plenum rated for air-handling spaces. RoHS compliant. The serialized jack body and 100% factory test reports provide audit-trail documentation for TIA-606-B administration standards and customer acceptance testing on government and healthcare projects where cable plant certification is contractually required.