Panduit CJS688TGY Mini-Com Cat 6 Shielded RJ45 Jack Module

The Panduit CJS688TGY is a Category 6 shielded RJ45 jack module from the Pan-Net™ Mini-Com line, engineered for high-performance structured cabling in commercial security, datacenter, and enterprise network installations. This tool-less (TG-style) jack terminates 22-26 AWG 4-pair twisted pair cable without requiring a punchdown tool, reducing installer labor and eliminating termination errors on patch panel and faceplate deployments. Every module ships with an individual serial number for full traceability and undergoes 100% factory testing to ensure it exceeds ANSI/TIA-568-C.2 Category 6 and ISO 11801 Class E channel requirements at frequencies up to 250 MHz. Black housing integrates into shielded Mini-Com modular patch panels and faceplates across surveillance head-end racks, access control risers, and PoE switch arrays.

Key Features

• Tool-less TG termination eliminates punchdown tool requirement, speeds installation on 22-26 AWG cable
• Shielded RJ45 design for EMI/RFI rejection in high-interference environments (surveillance DVRs, PoE arrays, motor controls)
• 100% factory tested and serialized for traceability — exceeds Cat 6 component and channel specs to 250 MHz
• Rated 2,500 mating cycles with IEEE 802.3af/at PoE and proposed 802.3bt Type 3/4 (up to 100W) support
• Compatible with Panduit shielded Mini-Com modular panels and faceplates across Pan-Net infrastructure
• UL 1863, UL 2043 plenum-rated, RoHS compliant, ANSI/TIA-1096A and IEC 60603-7 conformant

The CJS688TGY's tool-less TG termination system uses a cam mechanism that seats and terminates all eight conductors simultaneously when the cable is inserted and the module cap is closed — no 110-style punchdown block, no impact tool, no risk of over-driving or under-seating wires. This design is critical in high-density patch panel builds where installers terminate 48 or 96 jacks per rack unit; the TG style cuts termination time per jack from ~90 seconds to under 30 seconds and produces consistent, repeatable performance across every port. The shielded construction bonds to shielded twisted pair (STP) or foiled twisted pair (FTP) cable jackets, maintaining 360-degree shield continuity from cable entry through the RJ45 interface to the connecting plug — essential in surveillance and access control installations where IP camera PoE injectors, NVR switch stacks, and card reader power supplies generate electrical noise that can corrupt Gigabit Ethernet signaling on adjacent unshielded links. Each module's factory test report validates insertion loss, return loss, NEXT, FEXT, and alien crosstalk parameters across the full 1-250 MHz spectrum, and the laser-etched serial number on every unit enables post-install audits and warranty claims tied to specific production lots.

Deploy the CJS688TGY in modular shielded patch panels (Panduit CPP-series) for surveillance head-end racks where 24 or 48 IP camera home runs terminate into a central switching layer, or in Mini-Com shielded faceplates at camera junction box locations where a field-terminated STP cable feeds a camera's RJ45 pigtail. The module's 2,500-cycle rating and PoE support make it suitable for powered device installations — 802.3af (15.4W) and 802.3at (25.5W) PoE cameras, door controllers, and wireless access points, plus proposed 802.3bt Type 3 (60W) and Type 4 (100W) devices like PTZ cameras with integrated heaters and multi-radio access points. The black housing color-codes shielded ports in mixed STP/UTP patch fields, and the 0.62" width × 0.74" height × 1.5" length footprint matches standard Mini-Com spacing across all Panduit modular hardware. The module ships individually packaged (carton quantity 50) for jobsite inventory control, and the Sub-Brand designation Pan-Net™ confirms compatibility with Panduit's full copper infrastructure ecosystem including cable, patch cords, cable managers, and labeling systems.

Exceeds ANSI/TIA-568-C.2 Category 6 component and channel specs, ISO 11801 Class E performance, and ANSI/TIA-1096A shielded component requirements. Conforms to IEC 60603-7 (RJ45 interface dimensions) and IEC 60512-99-001 (connector durability). UL 1863 listed for communications cable assemblies and UL 2043 plenum-rated for air-handling spaces. RoHS compliant for lead-free, environmentally responsible deployments. When your install spec calls for shielded Category 6 infrastructure with tool-less field termination and full standards compliance, the CJS688TGY delivers factory-verified performance in a format that integrates directly into Panduit Mini-Com modular systems.