Lifesafety Power

Lifesafety Power · RGXM150-C8PZ

Lifesafety Power RGXM150-C8PZ 150W Power Supply

150W regulated power supply engineered for access control and security system integration

• Delivers 12A@12VDC or 6A@24VDC from a single 150W supply for mixed lock loads.
• Eight relay outputs at 2.5A each support per-channel failsafe or failsecure selection.
• Class 2 power-limited design eliminates conduit separation from low-voltage signal wiring.

Lifesafety Power · RGXM150-C8D8P

Lifesafety Power RGXM150-C8D8P 150W Single Voltage

150W single-voltage power supply built for access control and surveillance system integration where you need hardwired relay outputs to drive locks

• 150W at 120 VAC input consolidates power for up to 8 relay and 8 auxiliary outputs.
• 8 dry-contact relay outputs drive door strikes, locks, or alarm devices without adapters.
• 12 VDC regulated output supports multi-point access control and surveillance loads cleanly.

Lifesafety Power · RGXM150B-C8D8PZ1

Lifesafety Power RGXM150B-C8D8PZ1 RGXM150B-C8D8PZ1

150-watt regulated power supply designed for distributed security installations where multiple devices require stable DC power from a single

• 150W regulated output maintains stable DC voltage across mixed-device security loads.
• Centralized power distribution eliminates individual supplies at each endpoint device.
• Regulated design prevents voltage sag on analog CCTV and access control circuits.

Lifesafety Power · RGS75/150-D8Z

Lifesafety Power RGS75/150-D8Z 75W Power Supply

Field-configurable power supply designed to distribute 12VDC or 24VDC to multiple security endpoints in a single enclosure

• Dual-bus design powers 12VDC and 24VDC devices from one enclosure, eliminating extra PSUs.
• Eight independently fused 3A outputs isolate device faults, protecting the full distribution circuit.
• Field-configurable for 75W or 150W output; scales from 6A/12V up to 12A/12V as loads grow.

Lifesafety Power · RGS250-4D8Z/E

Lifesafety Power RGS250-4D8Z/E Gemini Rack Mount Power Systems

250W unified power system combining FlexPower modules and access control hardware in a compact UL-listed enclosure

• 250W output with 32 fused 3A auxiliary outputs supports large multi-zone deployments.
• Built-in fire alarm disconnect automatically releases door locks on alarm activation.
• Low-battery cutoff and fast charger prevent deep discharge in battery-backed installs.

Lifesafety Power · RGS250-4D8Z1

Lifesafety Power RGS250-4D8Z1 250W Power Supply

250W power supply designed for distributed IP camera and accessory installations in rack-mount environments

• 32 independently fused 3A DC outputs isolate faults and protect each endpoint circuit.
• Dual-bus architecture lets you supervise power integrity across two separate zones.
• 2U 19-inch rack form factor fits standard network closets; delivers 20A/12V or 10A/24V.

Lifesafety Power · RGS250-4D8/E

Lifesafety Power RGS250-4D8/E 150W Power Supply

150W rackmount power supply designed to distribute regulated DC power to networked security endpoints and auxiliary devices in distributed

• 150W rackmount power supply with 8 outputs
• 12V/12A or 24V/6A selectable per output
• Bus1/Bus2 supervision for failover-tolerant deployments

Lifesafety Power · RGS250-4D8

Lifesafety Power RGS250-4D8 GEMINI RG Rackmont

Rackmount power distribution unit designed for security integrations that require centralized, reliable 24VDC power delivery across multiple outputs

• Delivers 250W at 24VDC for multi-camera or access control loads from one rack unit.
• Rackmount form factor consolidates DC power alongside NVRs, switches, and control panels.
• Centralized fused distribution reduces voltage sag across distributed 24VDC endpoints.

Lifesafety Power · RGS150-D8Z

Lifesafety Power RGS150-D8Z Gemini Rack Mount RGS150-D8Z

150W rack mount power supply designed for access control and fire alarm systems

• 150W output with 8 × 3A fused zones supports multi-door access control from one 3RU unit.
• Built-in fire alarm disconnect automatically releases locked doors on alarm trigger.
• Integrated fast charger and low-battery cutoff protect battery backup during extended outages.

Lifesafety Power · RGS150B-M8NZ

Lifesafety Power RGS150B-M8NZ 150W Power Supply

2U rack-mount power module designed to centralize power distribution for IP camera systems and network security infrastructure

• Dual primary output—12A/12VDC or 6A/24VDC—handles high-inrush cameras and long runs.
• 8-port distribution with per-port 3A fusing isolates faults so one short won't drop the rack.
• Adjustable secondary output (5–18V @ 4A) powers legacy or specialty devices without extra supplies.

Lifesafety Power · RGS150-4D8Z

Lifesafety Power RGS150-4D8Z Rack Mount Power Sys

UL-listed rack mount power distribution system that combines FlexPower modules and access control hardware in a single compact enclosure

• 150W output with battery backup keeps doors powered through outages.
• 32 fused 3A auxiliary outputs with dual-color LED status per zone simplify fault tracing.
• Built-in fire alarm disconnect automatically releases door locks on alarm trigger.

Lifesafety Power · RGM-X-BOXED

Lifesafety Power RGM-X-BOXED Gemini Rack Drawer RGM-X 2U black

2U rack-mount drawer designed to integrate with Lifesafety Power Gemini power distribution systems

• Mounts in standard 19-inch racks, occupying only 2U of vertical space.
• Pull-out drawer design provides direct access to internal components during maintenance.
• Engineered for Lifesafety Power Gemini system frames; verify chassis compatibility before ordering.

Lifesafety Power · RGM-D8PZ1

Lifesafety Power Rgm-D8PZ1 Empty R2U Rackdrawer

N empty 2U rackdrawer designed to organize and mount up to four Lenel access control panels on a removable backplate within a standard 19-inch rack

• Mounts up to four Lenel access control panels on a removable backplate in 2U space.
• 19" EIA-compliant form factor (19W × 3.5H × 20.5D in.) fits standard rack rails.
• Integrated lockset and wire management arm reduce tampering risk and cable strain.

Lifesafety Power · RGM75-C8PZ/T4-A

Lifesafety Power RGM75-C8PZ/T4-A 75W Power Supply

75-watt power supply engineered for access control systems requiring distributed relay-switched lock control across multiple entry points

• Eight 2.5A relay outputs independently switch up to 8 locks from one 75W unit.
• Each output field-configures as fail-safe, fail-secure, or FAI for code compliance.
• Single supply delivers 6A at 12VDC or 3A at 24VDC, eliminating per-door modules.

Lifesafety Power · RGM75B-C8PZ/T4-A

Lifesafety Power RGM75B-C8PZ/T4-A 75W Power Supply

75W, dual-output rackmount power supply designed for security integrations requiring redundant voltage rails and multiple access control relay outputs

• Dual primary output (6A/12V or 3A/24V) supports both lock voltage standards from one unit.
• Eight relay lock control outputs with per-output failsafe/failsecure selection, no external relay modules needed.
• Adjustable 5–18V secondary rail at 4A powers auxiliary readers and sensors on an independent circuit.

Lifesafety Power · RGM75B-C8PZ

Lifesafety Power RGM75B-C8PZ RGM75B-C8PZ

75W redundant power supply designed for surveillance installations requiring uninterrupted DC distribution across multiple cameras and ancillary

Lifesafety Power · RGM75B-C4PZ/E

Lifesafety Power RGM75B-C4PZ/E Gemini Rack Mount

75W rack-mount power supply designed for access control systems requiring redundant battery backup and failsafe/failsecure lock control

• Dual 12V/24V outputs programmable per zone eliminate separate supplies in mixed-lock deployments.
• Four 2.5A Class 2 relay outputs support independent failsafe or failsecure lock configs per zone.
• Form C fault contacts supervise low battery, ground fault, PSU failure, and blown fuse conditions.

Lifesafety Power · RGM75B-C4PZ

Lifesafety Power RGM75B-C4PZ Gemini Rack Mount

Dual-voltage rack-mount power supply engineered for access control and fire alarm systems

• Delivers 75W total output with four 2.5A Class 2 relay lock outputs for multi-zone access control.
• Built-in fire alarm disconnect auto-unlocks doors on alarm, meeting life-safety code requirements.
• Fits standard 19-inch racks at 3.5H × 19.0W × 20.5D inches with 12V/24V selectable by zone.

Lifesafety Power · RGM75B-C4D8PZ

Lifesafety Power RGM75B-C4D8PZ 75W Power Supply

75W rackmount power supply designed for access control and security system installations

• Selectable 6A/12V or 3A/24V output covers both common lock and reader voltages.
• Four relay outputs, each fused at 3A and configurable for FAI, failsafe, or failsecure.
• Eight class-2 DC auxiliary outputs at 2.5A each support high peripheral counts per rack unit.

Lifesafety Power · RGM150-C8PZ

Lifesafety Power RGM150-C8PZ 150W Power Supply

150W power supply designed for access control and life safety systems requiring redundant, centralized power distribution

• Delivers 150W at 12A/12V or 6A/24V to support mixed lock hardware from one supply.
• Eight 2.5A relay outputs support FAI, failsafe, or failsecure modes per door independently.
• 2U 19-inch rackmount form factor with Z-bracket arm simplifies cable routing in rack deployments.