Lifesafety Power RGXM150-C8PZ 150W Power Supply with 8 Relay Lock Outputs
Overview
The RGXM150-C8PZ is a 150W regulated power supply engineered for access control and security system integration. It delivers 12A at 12VDC or 6A at 24VDC, with eight independent relay outputs rated at 2.5A per channel. Each output is individually selectable for failsafe or failsecure operation—critical when deploying magnetic locks, door strikes, or exit hardware across a single control point. Class 2 power-limited design means no conduit separation required from low-voltage signal wiring, simplifying installation in retrofit and new construction scenarios.
Output Configuration
Eight relay channels support both FAI (Fire Alarm Interface) and failsafe/failsecure selection per output. This granular control lets you configure different lock behaviors on the same supply—e.g., ground-floor strike in failsecure mode, emergency exit in failsafe—without additional hardware. 2.5A per output accommodates standard electromagnetic locks and solenoid-driven hardware in typical commercial deployments.
Power Delivery Flexibility
Voltage selection (12V or 24V) accommodates legacy and modern power supply ecosystem choices. The 150W budget supports simultaneous actuation across multiple locks when properly sequenced, or sustained power to a mixed load of locks and monitoring devices. If battery backup is required, the RGXM150-C8PZ can integrate with external UPS modules to maintain access control during AC loss—verify specific battery interface requirements with the manufacturer.
Installation Considerations
Verify relay contact ratings match your lock solenoid inrush current before commissioning. Confirm input voltage availability at the installation site and plan wiring runs to minimize voltage drop, especially on 24V circuits serving distant hardware. FAI configuration must align with your fire alarm system's integration requirements.
