Indoor IP Cameras

Plan Your Deployment

Coverage goals (general monitoring vs identification zones)
Form factor selection (dome, turret, discreet)
Lighting conditions and low-light performance needs
Lens choice and field-of-view planning
PoE power and cable routing considerations

Showing Results for Indoor IP Cameras

Compare

Add to Cart The item has been added
Pelco

SKU: IBD332-1

Pelco IBD332-1 3MP Anti-Ligature Corner Camera

3MP anti-ligature corner camera for secure detention & behavioral health
- 3MP at 30 fps with 135° view; IK10+ impact rating withstands deliberate assault
- No-grip flush housing eliminates all ligature anchor points; NEMA 4X sealed
- Built-in 850nm IR night vision; PoE+ powered; H.265 compression for 24/7 recording
In stock · Ships same business day

$1,107.72 $847.99 Save $259.73

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: IBD332-1SS

Pelco IBD332-1SS 3MP Stainless Anti-Ligature Corner Camera

3MP corner camera with anti-ligature stainless steel for secure facilities
- 3MP at 30fps with 135° view; IK10+ impact rated and IP66/IP67 sealed
- 316L stainless steel no-grip design eliminates ligature points in detention environments
- 0.027 lux night vision and WDR for low-light monitoring; PoE powered
Special Order · Ships in 2-3 weeks

$1,255.00 $922.99 Save $332.01

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: IBD532-1

Pelco IBD532-1 5MP Anti-Ligature Corner Camera

5MP corner camera with anti-ligature design for secure facilities
- 5MP (2560×1440) with 135° horizontal view from single corner mount
- No-grip anti-ligature design eliminates safety hazards in detention settings
- IK10+ vandalism resistance, IP67 rating, PoE+ powered with H.265/H.264
Special Order · Ships in 2-3 weeks

$1,534.08 $1,173.99 Save $360.09

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: IBD532-1SS

Pelco IBD532-1SS 5MP Stainless Anti-Ligature Corner Camera

5MP corner camera with anti-ligature stainless steel for secure facilities
- 5MP at 135° field of view with 0.027 lux night vision and WDR
- IK10+ impact rated 316L stainless steel with no-grip anti-ligature design
- IP66/IP67 washdown rated, PoE powered, -40°C to +60°C operating range
Special Order · Ships in 2-3 weeks

$1,677.00 $1,233.99 Save $443.01

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: IDL0-PU2

Pelco IDL0-PU2 Sarix Modular 2MP Camera Head

2MP modular camera head for Pelco housings with 0.1 lux low-light
- 2MP @ 30 fps with H.265/H.264 dual codec for bandwidth control
- 0.1 lux low-light + WDR day/night for high-contrast surveillance
- IP66-rated, PoE Class 3 powered, -40°C to +60°C operating range
Special Order · Ships in 2-3 weeks

$567.63 $434.99 Save $132.64

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: IDL302-FXI

Pelco IDL302-FXI 3MP Modular Camera Head

3MP modular camera head with PoE and IP66 for flexible surveillance
- 3MP at 30 fps with H.265/H.264 compression for detailed video
- 0.1 lux low-light + day/night WDR for 24/7 operation
- IP66 rated, -40°C to +60°C operating range, ONVIF compliant
Special Order · Ships in 2-3 weeks

$263.94 $194.99 Save $68.95

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: IDL303-PHI

Pelco IDL303-PHI 3MP Modular PTZ Imager Head

3MP modular PTZ imager head for Pelco PHI-compatible domes
- 3MP at 30 fps with H.265/H.264 compression and dual power options
- IP66 outdoor-rated with -40°C to +60°C operating range and WDR
- ONVIF Profile S/T compliant with 0.1 lux night vision and microSD storage
Special Order · Ships in 2-3 weeks

$263.94 $194.99 Save $68.95

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Pelco

SKU: IDL502-FXI

Pelco IDL502-FXI 5MP Sarix Modular Imager Head

5MP modular imager head for Pelco housing systems with day/night
- 5MP resolution at 30 fps with H.265 compression for efficient bandwidth
- IP66-rated, -40°C to +60°C operating range, PoE Class 3 powered
- 0.1 lux night vision, WDR, and ONVIF Profile S/T for multi-vendor systems
In stock · Ships same business day

$369.94 $272.99 Save $96.95

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: SBDE1-10V7-E2H-IR

Pelco SBDE1-10V7-E2H-IR Sarix Enhanced Duo 10MP Camera

Dual 5MP motorized varifocal camera with 30m IR and 130dB WDR
- Two independent 5MP sensors with concurrent H.265/H.264 streams from single cable
- 30m integrated IR night vision and 130dB WDR for high-contrast outdoor scenes
- IP66/IP67/IP68 rated, IK10 vandal-resistant, PoE+ powered, -40°C to +65°C operating
Special Order · Ships in 2-3 weeks

$1,498.38 $1,145.99 Save $352.39

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Pelco

SKU: SBDE1-16V7-E2H-IR

Pelco SBDE1-16V7-E2H-IR Sarix Enhanced Duo 16MP Dual-Sensor Camera

Dual 8MP sensors, one housing—monitor two zones from single cable drop
- Independent motorized 3.24–7.33mm lenses zoom each 8MP head separately
- 30m integrated IR + 130dB WDR handle 24/7 low-light and backlit scenes
- H.265 compression cuts storage ~50% vs. H.264 for dual 8MP streams
In stock · Ships same business day

$1,798.26 $1,375.99 Save $422.27

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: SBDE1-6V7-E2H-IR

Pelco SBDE1-6V7-E2H-IR Sarix Enhanced Duo 6MP Camera

Dual 3MP outdoor camera with 30m IR and IK10 vandal rating
- Two independent 3MP sensors with motorized varifocal lenses for dual-zone coverage
- 30-meter integrated IR night vision and 130 dB WDR for 24/7 monitoring
- PoE+ powered, IP67/IP68 weatherproof, H.265/H.264 compression for easy deployment
Special Order · Ships in 2-3 weeks

$1,305.60 $998.99 Save $306.61

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: SRXE4-2V12-IMD-IR1

Pelco SRXE4-2V12-IMD-IR1 4MP Dome IR Camera

4MP dome with 70m IR and motorized lens for secure indoor surveillance
- 4MP at 60 fps, 130 dB SureVision WDR handles backlit and reflective scenes
- Integrated 850 nm IR reaches 70 m; motorized 4.4–9.3 mm varifocal lens
- FIPS 140-3 Level 3, TPM, Secure Boot; IP66/IK11 rated; PoE+ powered
Special Order · Ships in 2-3 weeks

$909.84 $695.99 Save $213.85

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: SRXE4-2V29-IMD-IR1

Pelco SRXE4-2V29-IMD-IR1 4MP Dome Camera

4MP indoor dome with motorized zoom, 70m IR, and 130dB WDR
- 4MP at 60 fps with motorized 4.4–9.3mm varifocal lens and 32–109° zoom range
- Integrated 850nm IR reaches ~70m; 130dB SureVision handles extreme contrast
- Smart Analytics detect persons, vehicles, loitering; IP66/IK11 rated for durability
Special Order · Ships in 2-3 weeks

$955.74 $730.99 Save $224.75

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: SRXE4-4V29-IMD-IR1

Pelco SRXE4-4V29-IMD-IR1 4MP Sarix Enterprise Dome

4MP indoor dome with motorized lens, IR night vision, FIPS encryption
- 4MP at 60 fps H.265 with 130 dB SureVision WDR for mixed lighting
- 4.4-9.3mm motorized varifocal lens spans 32–109° field of view
- Integrated IR1 illumination reaches 0.001 lux mono; PoE Class 3 powered
Special Order · Ships in 2-3 weeks

$1,129.14 $863.99 Save $265.15

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: SRXE4-4V9-IMD-1

Pelco SRXE4-4V9-IMD-1 4MP Enterprise Dome Camera

4MP indoor dome with 130dB WDR and FIPS 140-3 for secure facilities
- 4MP at 60 fps with motorized 4.4–9.3mm lens (32–109° HFOV)
- 130 dB SureVision WDR handles high-contrast mixed-lighting spaces
- FIPS 140-3 Level 3, TPM, 802.1X, NDAA compliant for government use
Special Order · Ships in 2-3 weeks

$1,026.12 $784.99 Save $241.13

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: SRXE4-4V9-IMD-IR1

Pelco SRXE4-4V9-IMD-IR1 4MP Enterprise Dome Camera

4MP indoor dome with motorized lens, IR, and FIPS 140-3 security
- 4MP @ 60 fps with 4.4–9.3mm varifocal lens and 32–109° field of view
- 850nm IR for 0 lux night vision; 130dB SureVision WDR for contrast scenes
- FIPS 140-3 Level 3, TPM, Secure Boot; IP66/IK11 rated; PoE Class 3 powered
Special Order · Ships in 2-3 weeks

$1,083.24 $828.99 Save $254.25

Add to Cart
The item has been added

What to Look For When Buying

The decisions that matter most before you spec.

Identification vs. Detection Trade-Offs

Higher resolution and lower focal lengths improve face/license-plate identification but consume more bandwidth and storage. Pixel density and DORI calculations determine whether a 4MP or 8MP camera meets your identification distance requirement. Spec cameras to your furthest identification target, not just coverage area.

Power & Network Scaling

PoE simplifies installation but PoE budget planning is critical—switches fail before 24 cameras without proper midspan injectors or high-power switch investment. Pre-audit your switch capacity and uplink bandwidth to avoid mid-deployment redesigns.

NVR Throughput & Bitrate Reality

NVRs cannot actually handle their rated camera count at full bitrate and frame rate. Validate your recording server's aggregate write speed (MB/s) against your camera stream bitrates and retention math to prevent dropped frames and storage gaps.

Night Performance & Low-Light Limits

IR range is limited indoors by reflective surfaces and IR washout. 4K cameras particularly struggle at night due to low light sensitivity trade-offs. Test camera performance in your actual indoor lighting (or lack thereof) before bulk purchase; spec sheets don't always reflect real-world IR falloff.

Frame Rate Misconceptions

30 FPS does not always mean smoother motion or better forensics—higher frame rates increase bitrate and storage burden without forensic benefit for stationary subjects. Match frame rate to your use case: 15 FPS for access-point recording, 30 FPS for vehicle tracking only when necessary.

Vendor Selection & Support Continuity

Choose brands with strong North American support and firmware update track records. Axis, Hikvision, Hanwha, Pelco, Vivotek, and i-PRO maintain consistent firmware cadences and spare-parts availability for long-term deployments.

Technology Stack

The specs and acronyms that actually affect indoor ip cameras performance.

Resolution (MP, 4K, 8MP)

Megapixel count determines per-pixel detail and identification distance. 2MP suits detection-only; 4–5MP handles identification at 15–25 feet; 8MP+ extends identification to 35+ feet. Higher resolution increases bitrate and storage burden—validate NVR throughput before scaling.

Focal Length (mm)

Measured in millimeters; lower values (2.8–4mm) provide wide coverage, higher values (8–25mm) compress the scene for distant identification. Longer focal length = narrower field of view = greater zoom magnification. Box cameras allow lens swaps for custom optics; dome and turret designs typically have fixed lenses.

Low-Light Sensitivity & F-Number

Lower F-numbers (f/1.2) and higher sensor sensitivity (measured in lux) allow better performance in dark indoor spaces. IR (infrared) LEDs augment low light but have limited range indoors due to IR bounce-back and surface absorption—test in your actual space.

PoE (Power over Ethernet)

Single-cable power + data delivery simplifies installation and reduces cabling cost. Standard PoE provides ~13W; PoE+ (High-Power PoE) supports ~25W for pan-tilt cameras and heaters. Validate your switch's per-port and total power budget before exceeding 12–15 cameras per switch.

Bitrate & Codec (H.264, H.265, MJPEG)

H.264 is universal and lower bitrate; H.265 (HEVC) cuts storage by ~50% but requires compatible NVR/VMS. MJPEG is bandwidth-heavy but frame-accurate for forensics. Bitrate varies with motion and scene complexity—static scenes compress better. Multiply bitrate × camera count × 24 hours × retention days to forecast storage.

DORI (Detection, Observation, Recognition, Identification)

Industry standard defining how far a camera can detect motion, observe a person, recognize gender/clothing, or identify facial features. DORI calculations tie resolution, focal length, and distance together—use them to spec the minimum resolution and lens combination for your farthest target.

Typical Deployment Scenarios

Small Retail Store (5–8 cameras, 2000–3000 sq ft)

Dome cameras at entry, checkout, and stockroom with 2–4MP resolution, PoE power, and IR for after-hours. Single 16-port PoE switch with midspan injector, local 4TB NVR, 30-day retention. Budget 5–8W per camera and validate switch aggregate power.

Corporate Office (15–25 cameras, 10,000+ sq ft multi-floor)

Mix of 4MP turrets in open areas, dome cameras in conference rooms, box cameras at lobbies with zoom lens. Network backbone must support multi-switch aggregation (avoid single-switch bottleneck). High-performance NVR with 8TB+ RAID, 60-day retention, and redundant storage for business continuity.

Warehouse & Storage Facility (20–40 cameras, high ceilings)

Mix of fisheye and wide-angle cameras to reduce blind spots in aisles; 4–5MP for inventory identification. Validate bandwidth at the aggregation layer and use multi-NVR or distributed edge recording to prevent single-point NVR failure. Plan for 90-day retention on slower motion.

School Campus Multi-Building (50–100+ cameras)

Distributed dome and turret cameras across classrooms, hallways, and building exteriors; 4MP identification-grade sensors. K–12 surveillance design requires integration with access control and incident response workflows. Federated NVR architecture with central management and 180-day compliance retention.

Frequently Asked Questions

What resolution do I need for indoor identification?

Identification-grade capture typically requires 4–5MP at 15–25 feet, or 8MP for 25–40 feet. Lower resolution (2MP) works for detection and general coverage but fails for facial or badge identification. Use DORI (Detection, Observation, Recognition, Identification) math to calculate the minimum megapixels and focal length needed for your furthest target distance.

Can I power 20+ indoor cameras on a single PoE switch?

No. Standard PoE (13W/port) can supply ~12–15 cameras before thermal limits and aggregate power budgets are exceeded. Use PoE+ (High-Power PoE) switches or midspan injectors for camera counts above 15, and always validate the switch's total power budget against your camera specifications.

Which indoor camera form factor is best for my space?

Dome cameras suit retail and offices (discrete, vandal-resistant); turrets work in warehouses and open layouts (360° flexibility, easy to adjust); box cameras suit high-specification deployments where lens swaps or long focal lengths matter. Fisheye/panoramic designs reduce camera count for very large open areas but sacrifice per-pixel detail. Test lighting and sight lines before purchasing.

How much bandwidth and storage do indoor cameras actually consume?

Bitrate depends on resolution, frame rate, codec (H.264 vs. H.265), and motion activity. Expect 2–6 Mbps for 4MP at 30 FPS, 4–8 Mbps for 5MP, and 8–15 Mbps for 8MP. Multiply bitrate × camera count × 24 hours × retention days and divide by 1000 to forecast TB of storage needed. Static scenes compress better; add 20% buffer for peak bitrate.

What is the difference between H.264 and H.265 codecs?

H.264 is the industry standard, supported by all NVRs and VMS platforms, and delivers good compression at ~4–8 Mbps per 4MP camera. H.265 (HEVC) cuts bitrate and storage by ~50% but requires a compatible NVR/server and may cost more per camera. Choose H.264 for legacy or budget deployments; H.265 for bandwidth-constrained or high-camera-count systems with modern storage infrastructure.

How do I choose between IR and low-light cameras for dark indoor spaces?

IR cameras excel in total darkness (server rooms, stockrooms) and have longer range than low-light sensors. Ultra Low Light (ULL) cameras perform better under ambient light (hallways, retail after-hours) because IR reflection and washout are reduced. Test both in your actual space; spec sheets don't reflect IR bounce-back from white walls or polished floors, which can degrade image quality.

Plan Your Deployment

Showing Results for Indoor IP Cameras

Pelco IBD332-1 3MP Anti-Ligature Corner Camera

Pelco IBD332-1SS 3MP Stainless Anti-Ligature Corner Camera

Pelco IBD532-1 5MP Anti-Ligature Corner Camera

Pelco IBD532-1SS 5MP Stainless Anti-Ligature Corner Camera

Pelco IDL0-PU2 Sarix Modular 2MP Camera Head

Pelco IDL302-FXI 3MP Modular Camera Head

Pelco IDL303-PHI 3MP Modular PTZ Imager Head

Pelco IDL502-FXI 5MP Sarix Modular Imager Head

Pelco SBDE1-10V7-E2H-IR Sarix Enhanced Duo 10MP Camera

Pelco SBDE1-16V7-E2H-IR Sarix Enhanced Duo 16MP Dual-Sensor Camera

Pelco SBDE1-6V7-E2H-IR Sarix Enhanced Duo 6MP Camera

Pelco SRXE4-2V12-IMD-IR1 4MP Dome IR Camera

Pelco SRXE4-2V29-IMD-IR1 4MP Dome Camera

Pelco SRXE4-4V29-IMD-IR1 4MP Sarix Enterprise Dome

Pelco SRXE4-4V9-IMD-1 4MP Enterprise Dome Camera

Pelco SRXE4-4V9-IMD-IR1 4MP Enterprise Dome Camera

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Indoor IP Cameras

Frequently Asked Questions

Related Categories

Engineering Reading