Code Blue · 41704

Code Blue Cord Grip 1/2 Gray - 41704

When securing cable entries in outdoor emergency stations, intercom enclosures, or paging equipment installations, proper strain relief protects

• 1/2" cord grip seals cable entries against moisture and dust intrusion.
• Integrated strain relief prevents wire fatigue at enclosure termination points.
• Gray finish aligns with Code Blue emergency station and intercom enclosures.

Code Blue · 41466

Code Blue Curb Mount GWT - 41466

Curb mount accessory designed to anchor Code Blue communication and emergency communication towers directly to concrete curbs or ground-level

• Anchors CB1, CB2, CB4, CB5, CB6, CB9, and CBRT towers directly to concrete curbs.
• Supports IP1500, IP2500, and IP5000 VoIP speakerphone series for flexible deployment.
• Designed for parking lots, loading docks, and perimeter curb installations without cantilevering.

Code Blue · 41461

Code Blue Curb Mount IP2500/Centry - 41461

Curb mount bracket designed to secure IP2500 and Centry VoIP speakerphones in outdoor and wall-mounted installations

• Supports wall, pole (2–4 in. diameter), and recessed mounting for flexible deployment.
• Compatible with IP2500 and Centry series VoIP speakerphones; not for legacy CB/LS units.
• Integrated cable passages route power and network cabling cleanly through the bracket.

Code Blue · 40165

Code Blue Dome Top - 40165

Dome-form replacement top enclosure for Code Blue's speakerphone and communication tower systems

• Replaces damaged dome housings on CB1, CB2, CB4, CB5, CB6, CB9, and CBRT series units.
• Compatible with IP1500/IP1501 and IP2500/IP2501 VoIP speakerphone systems.
• Mounts to existing bases with no structural modifications; flush fit maintains outdoor IP seal.

Code Blue · 41404

Code Blue Dome Top Lens 12-Pk - 41404

12-pack of replacement dome top lenses designed for Code Blue outdoor communication systems and speakerphone towers

• 12-pack format reduces reorder frequency and minimizes tower downtime during maintenance cycles.
• Compatible with CB1, CB2, CB4, CB5, CB6, CB9, and CBRT series enclosures.
• Tool-free swap design allows lens replacement without extended service interruption on active systems.

Code Blue · 41403

Code Blue Dome Top Lens 3Pk - 41403

Three-pack replacement dome top lens assembly designed for Code Blue speakerphone and communication enclosures

• Three-pack format reduces downtime across multi-unit deployments or stocked as field spares.
• Compatible with CB1, CB2, CB4, CB5, CB6, CB9, CBRT series and IA4100 speakerphones.
• Field-serviceable replacement; requires only a hex wrench or Phillips driver to install.

Code Blue · 41402

Code Blue Dome Top Lens For CB1e and CB1s - 41402

Replacement dome top lens assembly designed for the CB1e and CB1s camera models

• Restores optical clarity on CB1e and CB1s dome cameras without full unit replacement.
• Maintains original field of view and imaging performance after dome damage or discoloration.
• Designed exclusively for CB1e and CB1s models — verify camera model before ordering.

Code Blue · 40166

Code Blue Dome Top No Strobe AV - 40166

Dome top replacement component designed for Code Blue emergency communication towers and wall-mounted enclosures

Code Blue · 40259

Code Blue Dome Top PC Blue Strobe - 40259

Emergency communication towers and call stations need visible signaling that works in all lighting conditions and weather

Code Blue · 41044

Code Blue Equipment Ring 5in. in. GBK w/Post - 41044

When mounting emergency communication equipment in outdoor or high-traffic areas, secure attachment hardware prevents vandalism and ensures reliable

• 5-inch diameter ring fits standard emergency station housings for consistent deployment.
• Galvanized black finish resists corrosion, supporting reliable outdoor and perimeter installs.
• Integrated post eliminates separate brackets, reducing hardware count and installation time.

Code Blue · 42006

Code Blue Equipment Ring 5in. in. w/Post GBK-CC - 42006

5-inch equipment ring with integrated mounting post, engineered as a structural and mechanical accessory for Code Blue communication towers and

• 5-inch ring matches CB1, CB2, CB4, CB5, CB6, CB9, and CBRT tower footprints.
• Integrated post mount eliminates separate fastening hardware, reducing assembly time.
• Field-replaceable design supports tower expansion without full system replacement.

Code Blue · 41157

Code Blue Equipment Ring GBK 5.25in. in. - 41157

When mounting emergency communication stations, call boxes, or intercom panels in exposed outdoor locations, you need a weatherproof mounting

• 5.25-inch ring creates a weatherproof seal at cable entry points on outdoor installs.
• GBK finish resists corrosion in campus, parking, and transit exposure environments.
• Standardizes the mounting interface across Code Blue stations to simplify retrofits.

Code Blue · 41045

Code Blue Equipment Ring SBL CC 5in. in. w/Pst - 41045

5-inch equipment ring engineered to mount and secure SBL CC 5-inch speakerphone enclosures across diverse facility layouts

• Supports wall, pole, recessed, and rack installs from a single SKU, reducing inventory.
• Direct-fit design for SBL CC 5-inch enclosures eliminates adapters and alignment issues.
• Pole mounts on 1.5–2.5 in. diameter poles with integrated hardware; no drilling required.

Code Blue · 41165

Code Blue Equipment Ring SYL CC 5.25in. in. - 41165

Structural ring accessory designed for campus blue light call stations, parking deck emergencies, transit platforms, and any open-area location where

• Structural equipment ring accessory designed for Code Blue call station installations.
• Supports VoIP, analog, or cellular call paths to integrate with existing campus infrastructure.
• Weather-resistant, vandal-hardened construction suits outdoor campus, transit, and parking deployments.

Code Blue · 40024

Code Blue Fuse Kit for Fuse Block Power - 40024

Replacement fuse kit designed for fuse block power distribution in Code Blue speakerphone and communication systems

• Replacement fuse kit restores power continuity in Code Blue fuse block systems.
• Compatible with CB1, CB2, CB4, CB5, CB6, CB9, CBRT, LS1000, LS2000, IP1500–IP2501.
• Always disconnect fuse block power before replacing; match original amperage rating.

Code Blue · 50142

Code Blue Gaitronics Faceplate Kit - 50142

Gaitronics faceplate kit designed as a replacement component for Code Blue speakerphone and communication systems

• Gaitronics faceplate kit for Code Blue speakerphone replacement
• Drops onto Gaitronics-equipped Code Blue tower and station hardware
• Spare-parts kit for damaged or worn factory faceplate replacement

Code Blue · 40088

Code Blue Graphic 10in. in. Emergency White - 40088

10-inch emergency white graphic faceplate designed as a replacement or upgrade component for Code Blue emergency communication and mass notification

• 10-inch drop-in faceplate replaces worn or faded graphics without tower swap.
• Fits wall, pole, recessed, and rack mounts — one SKU across all configurations.
• Compatible with CB1, CB2, CB4, CB5, CB6, CB9, CBRT, IP5000, and IP1500/2500 series.

Code Blue · 40198

Code Blue Graphic 13in. in. Police White - 40198

13-inch graphic display panel finished in Police White, engineered as a replacement or expansion component for Code Blue emergency communication and

• 13-inch graphic display provides clear visual status and messaging at control-room distances.
• Wall, pole, recessed, and rack mounting options fit most installations without custom brackets.
• 12–24V DC input integrates directly with UPS-backed emergency comm and paging amplifier power.

Code Blue · 41108

Code Blue Gsk AccDoor CB1/CB9 Pre 2021 - 41108

GSK AccDoor replacement component engineered for CB1 and CB9 series emergency communication towers manufactured before 2021

• Direct-fit replacement for CB1/CB9 pre-2021 towers; no frame modification required.
• Weathertight gasket and latch restore environmental seal on pole-mounted enclosures.
• Field swap completes in under 30 minutes with standard fasteners; no re-tuning needed.

Code Blue · 40396

Code Blue Harness A700 Terminal Strip - 40396

Terminal strip harness designed for the A700 audio paging amplifier platform

• Standardized terminal strip simplifies audio and power wiring on A700 paging amplifiers.
• Supports wall, pole, recessed, and rack mount configurations for flexible deployment.
• Compatible with CB1–CB9, IP1500/2500, IA4100, and LS1000/2000 series Code Blue units.

Code Blue · 40086

Code Blue Harness Power to A700 Terminal - 40086

When retrofitting or expanding existing Code Blue emergency phone systems, maintaining clean power delivery to A700 terminals without re-running

• Dedicated power harness for A700 terminals supports 12–24V DC input range.
• Eliminates field splicing, reducing failure points and speeding up installations.
• Simplifies A700 retrofit work where existing power infrastructure needs adaptation.

Code Blue · 41411

Code Blue HID Lens CB1 3pk - 41411

When you need to visually identify HID card readers across large facilities or multi-building campuses, color-coded lens overlays provide instant

• Three blue lens overlays per pack reduce per-unit cost across large-scale deployments.
• Direct-fit design allows field replacement without removing or rewiring reader assemblies.
• Color-codes access points by zone or clearance level for instant end-user recognition.

Code Blue · 60071

Code Blue IA4100-d CC Enclosure Phone - 60071

N IA4100-d series enclosure phone designed for integration into emergency communication systems, area-of-refuge installations, and paging networks

• Four mount options (wall, pole, recessed, rack) eliminate custom brackets across sites.
• Audio input enables integration with paging amplifiers for emergency broadcast capability.
• Runs on 24V DC, allowing standardized power infrastructure across multiple enclosure installs.

Code Blue · 60006

Code Blue IA4100-ke Enclosure Phone - 60006

N IA4100-ke enclosure speakerphone designed for facilities that need robust audio communication built into a compact, mountable form factor

• Built-in audio input integrates with paging amplifiers, VoIP, or analog systems directly.
• Wall, pole, recessed, and rack mount options simplify deployment across varied site layouts.
• Enclosed form factor shields internal components from dust and impact in demanding environments.

Code Blue · 60093

Code Blue IA4100-s Enclosure Phone NB - 60093

N IA4100-s analog faceplate speakerphone enclosure designed to house communication devices in areas of refuge, emergency corridors, and critical

• Supports wall, pole, recessed, and rack mounting for flexible facility integration.
• Audio input enables direct connection to paging amplifiers and analog handset systems.
• Locking Wago plug-and-socket connectors (updated 2020) ensure stable electrical connections.

Code Blue · 60004

Code Blue IA4100-se Enclosure Phone - 60004

N IA4100-se enclosure-mount speakerphone designed for emergency communication installations where modular faceplate architecture and audio input

• Built-in audio input integrates directly with paging amplifiers and VoIP faceplate systems.
• Modular IA4100-se faceplate supports field replacement, reducing service downtime on live systems.
• Wall, pole, recessed, and rack mount options suit corridors, parking structures, and warehouses.

Code Blue · 50563

Code Blue IP1501-S Assistance - 50563

N audio input accessory engineered for the IP1500 and IP1501 series VoIP emergency communication speakerphones

• Direct replacement for IP1500/IP1501 series; verify primary unit model before ordering.
• Supports wall, pole, recessed, and rack deployments without additional adapter hardware.
• Operates on 12–24V DC and is field-replaceable without factory return or special test gear.

Code Blue · 50997

Code Blue IP2500-D Ss Push For Help/Info - 50997

Push-button accessory designed to extend the functionality of Code Blue IP2500 and IP2501 VoIP speakerphones

• Single-button activation triggers help or info announcements via the host IP2500/IP2501.
• No separate power, network, or configuration needed—draws signaling directly from host unit.
• Supports wall, pole, recessed, and rack mounting for flexible placement in refuge areas.

Code Blue · 49012

Code Blue Large Bezel Tactile Analog - 49012

Large bezel tactile analog faceplate designed as a replacement or upgrade component for Code Blue emergency communication towers and wall-mounted

• Tactile large-bezel faceplate retrofits CB1, CB2, CB4, CB5, CB6, and CB9 enclosures.
• Analog audio input supports LS1000, LS2000, and legacy IP5000 VoIP paging systems.
• Operates on 12–24V DC paging amplifier power; fits wall, pole, recessed, and rack mounts.

Code Blue · 40314

Code Blue Logo Code Blue Diamond Large - 40314

• Large diamond-profile tower maximizes visual identification across open campuses and parking structures.
• Integrated two-way audio and 360° blue strobe confirm emergency activation to both caller and responders.
• 12–24V DC input integrates with standard low-voltage infrastructure; compatible with VoIP and analog networks.

Code Blue · 70108

Code Blue LS1000-DA Enclosure Phone - 70108

N LS1000-DA enclosure phone designed for integrated audio paging and VoIP communication systems

• Supports wall, pole, recessed, and rack mounting for flexible facility deployment.
• Integrated audio input eliminates separate junction boxes in paging and emergency systems.
• Locking Wago plug-and-socket connectors (post-2020) reduce wiring errors during install.

Code Blue · 70120

Code Blue LS1000-DA Enclosure Phone Red - 70120

Red phone enclosure designed for the LS1000-DA audio paging platform

• Mounts on wall, pole, recessed, or rack — one enclosure model covers varied facility zones.
• Houses LS1000-DA paging amplifier and VoIP faceplate electronics within a single container.
• Modular design allows field replacement of internal paging components without full unit swap.

Code Blue · 71017

Code Blue LS1000-DAC Axis Cam Phone CC - 71017

Purpose-built audio interface module that integrates Axis IP camera platforms with Code Blue LS1000 VoIP paging systems

• Bridges ONVIF-compliant Axis PTZ and fixed cameras into the LS1000 SIP paging ecosystem.
• Eliminates separate audio cabling by routing two-way audio over existing PoE/IP infrastructure.
• Supports wall, pole, recessed, and rack mounting to fit varied facility deployment needs.

Code Blue · 70008

Code Blue LS1000-DAC Enclosure Phone - 70008

N LS1000-DAC audio paging enclosure phone designed for commercial emergency communication systems

• Wall, pole, recessed, and rack mount options eliminate the need for alternate models per site.
• Built-in audio input accepts line-level signals from VoIP systems without external preamps.
• Enclosure housing protects audio routing components and terminals in commercial environments.

Code Blue · 71002

Code Blue LS1000-DC Axis Camerae Phone - 71002

Component or replacement part for the LS1000-DC audio paging system — a 12–24V DC powered faceplate or module within Code Blue's LS1000 VoIP paging

• Operates on 12–24V DC, enabling integration with existing security panels and DC distribution.
• Expands or restores LS1000 VoIP paging coverage without replacing the full base unit.
• Supports wall, pole, recessed, and rack mounting to fit diverse LS1000 enclosure configurations.

Code Blue · 71005

Code Blue LS1000-DEC Axis Camera Phone - 71005

Replacement faceplate and audio component assembly for the LS1000 VoIP audio paging system

• Replaces LS1000 faceplate and audio assembly without full system swap.
• Supports 24V DC power and standard RJ-45 or hardwired audio terminations.
• Compatible with wall, pole, recessed, and rack mount LS1000 deployments.