i-PRO WV-S22500-V3L 5MP AI Indoor Dome IP Camera

i-PRO WV-S22500-V3L 5MP AI Indoor Dome IP Camera

The i-PRO WV-S22500-V3L is a 5MP AI-enabled indoor dome camera engineered for comprehensive surveillance in retail, office, and institutional environments. This compact, vandal-resistant model combines high-resolution image capture with advanced motorized optics, exceptional night vision, and integrated AI analytics to deliver both wide-area coverage and intelligent event detection from a single fixture. The motorized lens and on-device AI processing eliminate the need for separate PTZ hardware or external analytics servers in typical 20–30 ft indoor deployments.

Key Features

• 5MP resolution (3072×1728) at 30 fps: Native resolution captures fine detail across retail floors, office lobbies, and warehouse aisles without the cost and complexity of higher megapixel models. 30 fps ensures smooth motion tracking for incident review.
• Motorized lens (2.9–9 mm, 3.1x zoom) with autofocus: Remote framing and magnification adjustment eliminate repeated fixture repositioning during commissioning and reconfiguration. Wide angle (105°) to telephoto (33°) coverage spans typical indoor spans without secondary cameras.
• Exceptional night vision—0.04 lux (B&W, 50 IRE) in color mode; 0 lux with IR enabled: Captures usable facial detail and object identification in low-light retail stock areas and after-hours facility monitoring. No separate infrared fixture or backlighting workaround needed.
• IR LED array with 40 m reach (30 IRE) and 30 m reach (50 IRE): Illuminates large warehouse floors or outdoor loading docks (when dome is mounted in semi-protected locations) without secondary light sources. Adjustable IR range reduces washed-out near-field images on highly reflective surfaces.
• 132 dB maximum dynamic range with Super Dynamic mode: Simultaneously captures detail in backlit retail storefronts and shadowed corners without manual exposure compensation. Reduces false motion alerts triggered by lighting flicker or time-lapse shadow shifts.
• On-device AI analytics—face detection, people/vehicle detection, non-mask detection, occupancy monitoring, and sound classification (gunshot, yell, vehicle horn, glass break): Local processing eliminates upload latency and reduces backend server load. Occupancy counts and sound events (glass break, gunshot) trigger alarms instantly without external analytics appliance. Non-mask detection supports health protocol enforcement in healthcare and institutional settings.
• H.265 compression: Cuts bitrate 40–60% compared to H.264 on typical scenes—a real factor when recording 24/7 across 10+ cameras. Reduces storage and network bandwidth proportionally without quality loss.
• PoE power (IEEE 802.3af, Class 0) with optional DC12V supply: Draws under 13W via standard 802.3af PoE. No separate power supply or midspan injection needed; plugs directly into enterprise network switches. Optional 12V backup supports legacy infrastructure or temporary deployments.
• IK10 vandal rating with polycarbonate dome cover: Withstands direct strikes and impact damage in high-traffic retail or public assembly venues without lens replacement. Polycarbonate resists scratching and yellowing better than acrylic in harsh UV or chemical-heavy environments (e.g., food processing, chemical storage).
• ONVIF Profile G/M/S/T compliance: Integrates with any ONVIF-compatible VMS (Milestone XProtect, Genetec, Vivotek, etc.) without proprietary drivers or licensing overhead. Firmware updates and feature additions from i-PRO do not break existing NVR integrations.
• Privacy zone masking (up to 8 zones), VIQS (Video Image Quality Assessment), microSD card recording (manual, alarm, schedule, backup modes): Masking supports GDPR and local privacy regulations without camera repositioning. VIQS detects tampered lenses, condensation, or blooming before alerts propagate. MicroSD backup (up to 512GB) captures alarm footage locally when network bandwidth is exhausted.
• FIPS 140-2 Level 3 secure element (NXP EdgeLock SE050F), pre-installed GlobalSign certificate, 802.1X, HTTPS/SSL/TLS: Enterprise-grade cryptography and certificate pinning prevent man-in-the-middle attacks on PoE-powered networks. 802.1X port authentication enforces device identity before network access. No additional security appliances or licenses required.

Integration & Compatibility

The WV-S22500-V3L (often searched as WV S22500 V3L) supports up to 14 simultaneous network users over 10Base-T/100Base-TX connections. Audio I/O with adjustable gain enables two-way communication in office intercoms or customer assistance applications. Image rotation (0°/90°/180°/270°) simplifies ceiling or wall mounting without firmware workarounds. Multi-language GUI (English, Chinese, Japanese, and European variants) reduces training overhead in multinational operations.

Applications

Ideal for retail loss prevention (facial recognition at checkout), office lobby and access point monitoring, educational institutions (classroom occupancy during remote learning), healthcare facilities (contactless occupancy in isolation wards), and warehouse automation (movement tracking in high-bay storage). The combination of motorized zoom, on-device AI, and IK10 vandal resistance makes it a practical alternative to fixed-dome + separate PTZ or analytics appliance configurations in mid-sized deployments.

Frequently Asked Questions

Q: Does the WV-S22500-V3L support two-way audio?

A: Yes. The camera includes audio input and output with adjustable gain, enabling two-way voice communication. Configure audio endpoints in your VMS or IP intercom system.

Q: What is the maximum IR illumination distance?

A: 40 m at 30 IRE and 30 m at 50 IRE. The higher IRE standard (50) ensures facial recognition quality; 30 IRE prioritizes overall visibility over detail. Exact range depends on scene reflectivity and target size.

Q: Can the WV-S22500-V3L record locally to microSD without a network connection?

A: Yes. The camera supports manual, alarm-triggered, scheduled, and backup recording modes to microSD card (up to 512GB). Useful as redundancy when network bandwidth is congested or for temporary stand-alone deployments.

Q: Is the camera ONVIF-compatible for integration with third-party VMS platforms?

A: Yes. The WV-S22500-V3L is ONVIF Profile G/M/S/T compliant, supporting integration with Milestone XProtect, Genetec, Vivotek, and other standards-based platforms without proprietary drivers.

Q: What is the power consumption and PoE class?

A: The camera draws approximately 12.95W maximum and is IEEE 802.3af (Class 0) compliant. Standard PoE switches supply sufficient power without midspan injection.

Q: Does the motorized lens require calibration after installation?

A: The autofocus and zoom mechanisms self-calibrate. Manual focus and zoom adjustment are available via the web interface or VMS client for fine-tuning after mounting, but factory calibration is permanent.

Marty Allison

Perspective based on aggregated IP Security Depot and affiliated engineering team experience.

The WV-S22500-V3L strikes a practical balance between image quality and operational efficiency. The 5MP native resolution at 30 fps with motorized 3.1x zoom covers typical 20–30 ft indoor spans effectively, while the 132 dB dynamic range and multi-axis light compensation ensure usable detail even in challenging retail or office lighting. On-board AI—particularly sound classification and non-mask detection—reduces backend server load and accelerates alert response without third-party analytics licensing.

Technical Highlights:

• 0.04 lux color-mode sensitivity with 40 m IR reach: Facial recognition remains viable in dimly lit retail back-of-house or after-hours warehouse environments. IR range supports large indoor spans (typical warehouse aisles) without auxiliary lighting infrastructure.
• H.265 encoding at 5MP/30fps: On a 24-hour NVR with 10 cameras, H.265 cuts bitrate roughly 50% compared to H.264 (scene-dependent), translating to halved storage media and network switch port utilization. Real cost savings on infrastructure, not marketing math.
• PoE at 12.95W maximum (Class 0): Standard enterprise PoE switches (48 port, 90W budget) can power 6–7 of these cameras per port allocation, avoiding midspan injection complexity and cost.
• ONVIF Profile G/M/S/T + 802.1X + FIPS 140-2 secure element: Deploys into any standards-based VMS without proprietary driver maintenance. 802.1X enforces device identity on the network; FIPS-certified cryptography prevents certificate spoofing in high-security retail or government facilities.

Deployment Considerations:

• The motorized lens adds complexity to firmware updates compared to fixed-lens models—autofocus calibration occasionally requires recalibration after major firmware pushes. Budget an extra 5 minutes per camera for post-update focus verification.
• IK10 vandalism resistance assumes typical blunt-force impact. Intentional lens destruction (sharp object, acid spray) or sustained impact exceeding the IK10 spec (11 J) will disable the camera. Do not oversell vandal resistance in extremely hostile environments (correctional facilities, high-conflict retail).
• On-device AI (face detection, non-mask detection) is powerful but local processing—no cloud API fallback if the secure element fails. In critical compliance audits (healthcare, financial), validate that local AI accuracy meets your threshold before full deployment.

Best fit: mid-sized retail chains, office campuses, and warehouse automation environments where motorized zoom eliminates repositioning cost and H.265 bitrate savings offset the slightly higher per-unit price compared to fixed-dome alternatives. Sound classification and occupancy analytics add real operational value in spaces where backend server capacity is constrained.