HES

HES · RP-26ASLIM

HES RP-26ASLIM Remote Plate Slim Line Assembly

Slim remote plate with N/C guard ring for HES electric strikes

• Slim-profile form factor fits space-constrained door frames where standard plates won't mount.
• N/C guard ring maintains fail-safe lockdown during power loss or system fault conditions.
• Compatible with HES electric strike bodies for straightforward retrofit or new-build installs.

HES · RP-26SLIM

HES RP-26SLIM Slimline Remote Plate Stainless Steel

Slimline stainless steel remote plate for space-constrained access control

• Slimline form factor fits door frames where standard remote plates won't clear.
• Stainless steel construction resists corrosion, reducing maintenance in demanding sites.
• US-made, wall-mount design integrates with HES electromagnetic locking systems.

HES · AM3330

HES AM3330 Additional Header Wall Plate 600 Series

Header wall plate for HES 600 Series single magnetic locks

• Header wall plate for the HES 600 series maglock
• Direct-fit accessory for single magnetic lock install
• Wall-mounted header configuration for commercial doors

HES · 426

HES 426 Slimline Back Box

Shallow-profile back box for AXIS dome cameras in tight spaces

• Slimline back box for shallow camera mounting
• Compatible with AXIS fixed dome and compact models
• Flush or semi-recessed install on wall or ceiling

HES · 7000-104

HES 7000-104 Lip Extension Trim Adapter

Lip extension adapter for HES 7000 series strikes on non-standard frames

• Extends lip reach on HES 7000 series (models 791/792) for non-standard frame depths.
• Enables retrofit installs where frame modification is impractical, saving labor cost.
• US-manufactured adapter integrates with existing 7000-series strike hardware, no rework.

HES · TDK-1

HES TDK-1 Thick Door Kit

Mounting extension for Magnalock strikes on 2–3¼" thick doors

• Extends Magnalock strike mounting for doors 2 to 3¼ inches thick.
• Compatible with Magnalock models M32, M38, M62, M68, and M82.
• Lightweight kit at 0.1 lb simplifies field adaptation on reinforced doors.

HES · 9000-108-630

HES 9000-108-630 Spacer Kit 1/8 Plate Satin Stainless

1/8" satin stainless spacer for HES 9000 Series strike alignment

• 1/8" plate thickness corrects frame-to-strike gaps without over-shimming or binding.
• Satin stainless steel resists corrosion in indoor and semi-protected transition environments.
• Direct HES 9000 Series compatibility eliminates custom drilling or field rework on install.

HES · 9000-116-630

HES 9000-116-630 Spacer Kit 1/16 Satin Stainless

1/16" satin stainless spacer plates for HES 9000 Series locks

• 1/16" satin stainless steel construction resists corrosion in demanding environments.
• Engineered for HES 9000 Series, ensuring precise strike alignment and reliable lock engagement.
• Eliminates frame gaps that compromise electromagnetic lock performance in access control installs.

HES · RP-04

HES RP-04 Remote Plate with LED Indicators

Remote status plate with dual LED indicators for HES strike systems

• Dual red/green LEDs deliver instant lock status visibility at the door edge.
• D-hole mount enables fast retrofit or new-build install on standard strike frames.
• Runs on 12VDC and integrates directly into existing HES electric strike systems.

HES · RP-33

HES RP-33 Radius Faceplate

Radius faceplate for HES electric strike installations

HES · RP-23SLIMLINE

HES RP-23SLIMLINE Stainless Steel Slimline Strike Plate

Stainless steel slimline strike plate for tight door frames with piezo alert

• Slimline form factor fits tight door frames where standard strike plates conflict.
• Stainless steel construction resists corrosion in high-humidity or coastal facilities.
• Integrated piezo alert hole enables field-installed audible feedback for access events.

HES · RP-05

HES RP-05 Remote Plate SGSS Red/Green LED Push Button

Stainless steel remote plate with dual LED status for access control

• Stainless steel (SGSS) construction resists corrosion in high-moisture environments.
• Dual red/green LED gives instant door-state confirmation at the entry point.
• N/O momentary push button integrates directly with HES electric strike circuits.

HES · RP-06

HES RP-06 Remote Plate Stainless Steel LED Medico Lock

Stainless steel remote plate with red/green LED for medico locks

• Stainless steel housing resists corrosion in healthcare and pharmaceutical environments.
• Integrated red/green LED gives instant lock-state confirmation without extra hardware.
• Medico-format mounting integrates directly into existing HES lock mechanisms at 12VDC.

HES · AM6360

HES AM6360 Maglock Brackets

Steel maglock mounting bracket for 12/24VDC access control systems

• Steel-reinforced maglock brackets for AM6360 installs
• Eliminates 1-2mm misalignment that causes failures
• Built for cold-climate and high-vibration entries

HES · 801A-630

HES 801A-630 Satin Stainless Steel Faceplate

Satin stainless steel faceplate for HES electrified strike hardware

• Satin stainless steel construction resists corrosion in high-traffic commercial installs.
• Compatible with HES electrified locking hardware for streamlined access control integration.
• Supports 24VDC input, fitting standard electrified strike wiring configurations directly.

HES · RP-03M

HES RP-03M Remote Plate Narrow N/C Tamper Switch

N/C tamper switch remote plate for HES strike systems with narrow profile

• Narrow-profile remote plate with N/C tamper switch
• Medico hole configuration for standard frame mount
• Compatible with HES electric strikes and lock systems

HES · RP-100302

HES RP-100302 Electric Strike 450A Stainless Steel

450A stainless steel electric strike with fail-safe N/O operation

• Fail-safe N/O operation releases latch on power loss, meeting emergency egress code.
• Runs on 12VDC or 24VDC, eliminating converters when retrofitting existing control panels.
• 302 stainless steel construction resists corrosion in commercial and light-moisture environments.

HES · RP-02

HES RP-02 Ivory Pushbutton Red LED N/O Switch

Narrow ivory pushbutton with red LED for access control door release

• N/O contact closes on press — no relay logic needed for standard REX circuits.
• Integral red LED confirms circuit activation, reducing user confusion at the door.
• Narrow wall-mount plate fits tight vestibule trim without frame modification.

HES · RP-03

HES RP-03 Remote Plate Narrow R/G LED Tamper Switch

Remote plate tamper switch with red/green LED status for HES strikes

• N/C tamper switch triggers an alert the moment unauthorized access is attempted.
• Dual red/green LEDs give installers instant visual confirmation of door state.
• D hole mount and 24 VDC input simplify drop-in integration with HES strike wiring.

HES · RP-03A

HES RP-03A Remote Plate Tamper Switch R/G LED

Remote status plate with dual-color LED and tamper detection for access control

• Dual red/green LED gives instant visual lock status confirmation at the door.
• N/O tamper switch integrates directly with control panels for real-time alerts.
• D-hole mount fits standard frames; runs on 12VDC access control power supplies.