HES AOS-62 Strike Plate Offset
The AOS-62 is a precision offset strike plate engineered to solve a common integration challenge: when standard strike plate positioning doesn't accommodate the specific latch geometry or door frame configuration of your installation. Rather than forcing an alignment that stresses hardware or compromises latch engagement, the offset design lets you position the strike relative to the frame in a way that delivers clean, predictable electrical actuation. This matters because poor strike alignment wastes energy, causes nuisance lock failures, and complicates troubleshooting on retrofit jobs.
Key Features
- Offset Configuration: Shifts strike position relative to the frame, solving alignment issues when standard strikes won't work — critical on older door frames or non-standard latch heights where forcing alignment risks hardware damage.
- HES System Compatibility: Pairs with the HES electric strike platform, ensuring integration with your existing access control ecosystem without adapter chains or workarounds.
- Standard Door Frame Ready: Designed for professional commercial installations in office buildings, healthcare facilities, educational institutions, and corporate campuses — environments where uptime and repeatability are non-negotiable.
- Controlled Latch Engagement: Positions the strike to engage the latch predictably, reducing mechanical stress and extending hardware life compared to misaligned setups.
- Retrofit & New-Build Use: Particularly valuable on retrofit jobs where existing door frames don't match the latch geometry of your chosen strike — saves redesign time and avoids expensive frame modification.
- Professional Security Integration: Built for integrators who need to install once and not return — offset positioning means fewer callback service calls due to latch binding or inconsistent engagement.
When to Choose the AOS-62
Pick this model if you're installing an electric strike system and have discovered during site survey that the door frame geometry or latch height won't accept a standard strike plate. Common scenarios include older commercial buildings with non-standard frame profiles, retrofit access control upgrades where the existing door hardware isn't centered on the frame, or any installation where the latch mounting point sits outside the strike's nominal engagement zone. The offset design is also useful when multiple doors on a campus have varying frame types — one offset SKU can handle geometry variation that would otherwise require custom fabrication or frame rework.
If your installation involves only standard, modern commercial frames with centered latches, a standard strike plate may be sufficient. Verify door frame specifications during site survey before ordering.
Integration & Compatibility
The AOS-62 is designed for access control integration with HES electric strike hardware. Installation requires standard door frame preparation and compatibility verification with your specific HES strike system model number. Professional security integrators should verify latch-to-frame geometry during site survey to confirm that an offset configuration is the correct solution — incorrect strike positioning is one of the top causes of field service calls. Once positioned, the offset strike engages the latch cleanly and predictably, keeping your access control system reliable.
Frequently Asked Questions
Q: How do I know if I need an offset strike plate?
A: During door frame survey, measure the distance from the frame edge to the latch centerline. If that distance doesn't match your strike plate's nominal engagement zone, an offset model like the AOS-62 will solve the alignment problem. If measurements match standard specs, you don't need an offset.
Q: Can the AOS-62 be used on retrofit installations?
A: Yes. Retrofit jobs often encounter non-standard frame geometry. The offset design lets you integrate your HES strike system without reworking the door frame, saving time and cost compared to custom fabrication.
Q: Is the AOS-62 compatible with all HES strike models?
A: The AOS-62 is designed for HES electric strike systems. Verify compatibility with your specific HES strike model number before ordering, as some strike variants may have different engagement profiles. Consult HES documentation or contact a qualified integrator.
Q: What if I install the strike plate misaligned?
A: Misalignment causes the latch to bind, latch engagement to become inconsistent, and increased wear on both the latch and strike hardware. This is one of the most common field service triggers. Get the geometry right during installation survey.
Q: Does the offset design affect electrical performance?
A: No. The offset is purely mechanical — it repositions where the strike engages the latch. Electrical actuation and solenoid performance remain identical to a standard strike, assuming proper alignment.
Q: What maintenance does the AOS-62 require?
A: Strike plates are passive hardware. Inspect mounting bolts annually for tightness, and clean any dirt or debris from the latch engagement zone. No electrical servicing is required.
Ted PerryPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The AOS-62 offset strike plate is a straightforward solution to a problem that trips up integrators on every third retrofit job: the door frame geometry doesn't match the strike's nominal engagement zone. Rather than reinventing the installation, the offset design lets you reposition the strike relative to the frame and get back to work. This is not a fancy accessory — it's a practical tool that saves hours of site troubleshooting and frame modification.
Technical Highlights:
- Offset Positioning: Solves frame-to-latch alignment without custom fabrication or frame rework — meaning faster deployments on retrofit jobs and fewer service callbacks due to latch binding.
- HES System Integration: Direct compatibility with HES electric strike hardware removes integration uncertainty and lets you focus on access control logic, not hardware compatibility chains.
- Standard Commercial Frame Ready: Designed for professional installations in office, healthcare, and education sectors where uptime and predictability are expected — not a workaround, a production component.
Deployment Considerations:
- Order the offset variant only after verifying door frame geometry during site survey. Incorrect strike positioning is one of the leading causes of field service calls and latch failure — measure twice, order once.
- The offset is a mechanical solution; electrical performance of your HES strike is unchanged. Poor alignment after installation will still cause latch binding and premature wear, so installation precision matters.
Deploy the AOS-62 in retrofit access control upgrades and new builds where door frame geometry is non-standard — it's the difference between a clean installation and a callback truck. For standard commercial frames with centered latches, you probably don't need it.
