Vertiv GXT5 Output POD 6 - PD5-006

Vertiv PD5-006 GXT5 Output POD — 30A L14-30P to 4x NEMA L6-20R Power Distribution

Overview

The Vertiv PD5-006 is a rack-mountable output power distribution pod (POD) engineered specifically for the Vertiv GXT5 UPS family. It accepts a single NEMA L14-30P feed from a compatible GXT5 unit and distributes that capacity across four NEMA L6-20R receptacles — giving you clean, protected 20A-rated outlets at the rack level without running additional circuits back to the panel. For integrators building out high-density rack environments around the GXT5-5000MVRT4UXLN or GXT5-6000MVRT4UXLN, the PD5-006 (often searched as PD5 006) is the factory-matched output expansion path.

Output PODs in the GXT5 architecture exist because a single UPS chassis frequently serves multiple devices with different receptacle requirements. Rather than relying on third-party power strips — which introduce unknown loss, no UPS integration, and potential warranty complications — Vertiv's POD system keeps distribution within the verified GXT5 ecosystem. The PD5-006 handles up to 30A input (matching the L14-30P plug rating), distributing to four individually accessible L6-20R outlets. If you're powering 208V equipment in a rack — servers, storage arrays, or high-draw networking gear — this is the correct outlet type to provision.

Key Features

• NEMA L14-30P Input Connector: The locking L14-30P plug mates directly to the GXT5's output receptacle, eliminating adapter chains. A locking connection means vibration or accidental contact won't break the circuit — relevant in any environment with rack-mounted equipment on wheels or in high-traffic equipment rooms.
• Four NEMA L6-20R Output Receptacles: Each L6-20R is rated for 20A at 208V/240V — the standard outlet type for servers, PDUs, and storage equipment that require a 2-pole 3-wire grounding connection. Four discrete outlets let you serve four independent loads without a secondary distribution device.
• 30A Maximum Current: The 30A input ceiling means you have up to 30A total to allocate across all four L6-20R outlets, supporting realistic rack loads without derating to the point where capacity is wasted. Plan your per-outlet loads accordingly — four devices at full 20A each would exceed the input; use this POD where actual draw is distributed and measured.
• Rack-Mountable Form Factor in Black: The black rack-mount chassis integrates visually and physically into standard 19-inch rack enclosures. No wall-mount guesswork, no shelf kits — it drops into your existing rack alongside the GXT5 itself. Check Vertiv's published rack unit height before allocating space.
• Factory-Matched to GXT5-5000M and GXT5-6000M UPS Models: Vertiv validates the PD5-006 specifically against the GXT5-5000MVRT4UXLN and GXT5-6000MVRT4UXLN. Using a factory-matched POD preserves UPS warranty alignment and ensures the output circuit is correctly rated for the UPS's protected output bus — no guesswork about whether the receptacle configuration is within spec.
• Clean Protected Power to All Four Outlets: Because the PD5-006 connects downstream of the GXT5 inverter output, every connected load receives the same UPS-conditioned, battery-backed power as if plugged directly into the UPS chassis. The POD adds no additional conditioning, but it also introduces no bypass — all outlets remain on protected power as long as the GXT5 is operational.

Integration and Compatibility

The PD5-006 is validated for use with two specific Vertiv GXT5 chassis: the GXT5-5000MVRT4UXLN (5kVA) and GXT5-6000MVRT4UXLN (6kVA). These are the 4U rack models in the GXT5 mid-range line. Do not attempt to pair this POD with GXT5 models outside this list — connector types and output bus ratings differ across the GXT5 family, and Vertiv publishes distinct POD part numbers for each tier. For 2kVA and 3kVA GXT5 units, the MP2-series PODs apply. For the higher-voltage 5kVA/6kVA international variants, the PD5-201/PD5-202 IEC-outlet PODs are the correct pick.

If your rack includes a mix of 208V and 120V loads, the PD5-006's all-L6-20R output configuration means it serves only 208V-capable equipment. Devices requiring standard NEMA 5-15/20R (120V) receptacles would need a different POD variant — for example, the PD5-001 or PD5-003, which include a mix of L6-30R and NEMA 5-15/20R outputs on the same L14-30P input. Consider your load profile before ordering: the PD5-006 is purpose-built for all-208V rack environments, not mixed-voltage configurations.

For integrators designing network infrastructure or surveillance server racks where all equipment runs at 208V — common in datacenter-adjacent deployments and security operations centers — the PD5-006 delivers the simplest, most direct distribution path. Pair it with a properly sized rack UPS from the compatible GXT5 line and your outlet count and protection are handled in one verified assembly.

Frequently Asked Questions

Q: Which GXT5 UPS models is the PD5-006 compatible with?

A: The PD5-006 is validated for the GXT5-5000MVRT4UXLN (5kVA) and GXT5-6000MVRT4UXLN (6kVA) rack UPS models only. It is not compatible with GXT5 units outside this list — other GXT5 tiers require different POD part numbers.

Q: What type of outlets does the PD5-006 provide?

A: The PD5-006 provides four NEMA L6-20R receptacles. These are locking 20A, 208V/240V outlets suitable for servers, storage arrays, and networking equipment requiring a 2-pole 3-wire grounding connection. This POD does not include any NEMA 5-15/20R (120V) outlets.

Q: What is the maximum current the PD5-006 can handle?

A: The PD5-006 has a maximum input current rating of 30A, fed via the NEMA L14-30P input connector. Total load across all four output receptacles must not exceed 30A.

Q: Does the PD5-006 provide surge protection or UPS conditioning on its own?

A: No — the PD5-006 is a passive output distribution pod. It has no internal battery, inverter, or surge protection. All conditioning comes from the connected GXT5 UPS upstream. The POD simply distributes the UPS-protected output to four L6-20R outlets.

Q: Can the PD5-006 be used with a different brand or model of UPS?

A: The PD5-006 is engineered and validated specifically for the Vertiv GXT5-5000MVRT4UXLN and GXT5-6000MVRT4UXLN. Using it with other UPS brands or models outside the Vertiv GXT5 family is not covered by Vertiv's validated configurations and may result in mismatched connector ratings or warranty concerns.

Q: Is the PD5-006 rack-mountable?

A: Yes. The PD5-006 is designed for rack mounting and ships in a black chassis compatible with standard 19-inch rack enclosures. Verify the rack unit height in Vertiv's installation documentation before allocating rack space.

Marty Allison

The PD5-006 is one of those components that looks simple on paper — a passive POD with four L6-20R outlets on a 30A L14-30P input — but gets specified incorrectly more often than it should. The critical factor is that every outlet on the PD5-006 is NEMA L6-20R, which means every connected device must be 208V-capable. If you're building a mixed-voltage rack and you order this POD assuming you can run 120V gear off it, you're going to have a bad day at commissioning.

Technical Highlights:

• NEMA L14-30P Locking Input: The locking input connector is non-negotiable for rack stability — a pull-away disconnect from a non-locking source is a silent UPS bypass event. The L14-30P mates correctly to the GXT5-5000MVRT4UXLN and GXT5-6000MVRT4UXLN output bus without adapters.
• Four NEMA L6-20R Outputs: Four discrete 20A/208V locking outlets on a 30A input means real-world capacity planning matters: four loads at 15A each saturates the input. Typical server and storage draws of 6–10A per device leave comfortable headroom.
• 30A Input Ceiling: Vertiv rates this POD at 30A maximum — the same as the L14-30P plug standard. There is no circuit breaker internal to the POD documented in the evidence, so overload protection depends on the upstream UPS and any panel-level breaker protecting the feed circuit.

Deployment Considerations:

• Confirm rack unit availability before ordering — the PD5-006 installs in the same rack as the GXT5 4U chassis, and 5kVA/6kVA units already consume significant rack space. Measure first.
• This POD is validated only for the MVRT4U chassis variants (GXT5-5000MVRT4UXLN and GXT5-6000MVRT4UXLN). If the project spec calls for a GXT5-5000HVRT or any international-voltage variant, you need a different POD entirely — the PD5-201 or PD5-202 covers the hardwired IEC variants.

The PD5-006 is the right call for security operations center (SOC) rack builds and enterprise server rooms where all equipment is 208V-native and the UPS is already specified as a GXT5-5000M or GXT5-6000M — straightforward outlet expansion with no compatibility guesswork when ordered against the correct GXT5 chassis.