Geovision GV-SR1251 84-SR12510-0100 PTZ Camera Cable

Geovision 84-SR12510-0100 PTZ Camera Cable

Overview

The Geovision 84-SR12510-0100 is a weatherproof cable assembly that carries both power and control signals to Geovision IP PTZ cameras in outdoor installations. IP66 rating means it resists direct water spray and dust ingress—critical where cables run exposed on building exteriors, conduit entries, or junction boxes. This cable eliminates the need for separate power and data runs, simplifying rooftop PTZ and corner-mounted motorized dome deployments.

Compatibility

Designed for Geovision GV-SR1251 motorized PTZ cameras and related Geovision IP PTZ product lines using the same connector specification. Confirm your camera model matches the GV-SR1251 series before ordering—connector mating is specific to this family. Not compatible with fixed-lens IP cameras or non-Geovision PTZ systems.

Installation Notes

Run cable through rigid conduit or cable trays in outdoor installations to protect against abrasion and UV degradation. Avoid sharp bends near connectors; IP66 sealing is effective only when end-caps remain seated. Keep cable lengths under 100 meters to prevent voltage drop under motor load (typically 10–15W for pan-tilt actuation). Where cable shares conduit with mains power, maintain 6-inch spacing or run inside armored sleeve per National Electrical Code to prevent cross-talk that disrupts motor control signals.

What's in the Box

• 1x GV-SR1251 PTZ camera cable with integrated connectors