Geovision 84-AS15200-A01U GV-AS1520 IP PTZ Camera Cable
Overview
The Geovision 84-AS15200-A01U is a dedicated IP PTZ camera cable engineered to connect and power Geovision GV-AS1520 pan-tilt-zoom cameras. This cable integrates both data transmission and power delivery in a single run, eliminating the need for separate signal and power lines to your PTZ head. Use this when installing a GV-AS1520 PTZ system or replacing a damaged cable in an existing deployment. The professional-grade construction supports the full operational range of pan, tilt, zoom, and focus control without signal degradation or voltage drop that would compromise motor response.
Compatibility
This cable is designed specifically for the Geovision GV-AS1520 IP PTZ camera system. It connects the PTZ head to your network infrastructure or control equipment, carrying both video/control data and power required for pan-tilt-zoom operation. Verify compatibility with your existing Geovision PTZ installation before ordering — this is a model-specific cable and will not function with other PTZ families or non-IP mechanical systems.
Installation Notes
Plan your cable run length based on power budget and network switch capacity — PTZ motors draw more current than fixed cameras, and voltage drop over very long runs can slow pan/tilt response or cause motor stall. Route the cable away from high-voltage lines and direct sunlight where possible. Secure the cable at regular intervals to prevent stress on connectors during PTZ movement. Test pan, tilt, and zoom functionality immediately after installation to confirm smooth motor operation and video streaming before commissioning the system.
What's in the Box
- 1x GV-AS1520 IP PTZ camera cable (MPN 84-AS15200-A01U)
