Geovision 84-SV48000-0010 48MP IP PTZ Camera

Overview

The Geovision 84-SV48000-0010 is a 48MP motorized PTZ camera engineered for large-area surveillance where subject detail at distance is non-negotiable. Deploy this on rooftops, perimeter fencing, or elevated mounts to monitor expansive outdoor scenes—parking lots, industrial yards, loading docks, campuses—with a single unit capable of pan-tilt-zoom without repositioning hardware. The 48MP resolution means distant subjects remain identifiable when zoomed into recorded footage; the real value emerges when you pull detail from a full-scene recording and discover a vehicle plate or face remains legible despite being hundreds of feet from the camera lens.

Compatibility

The 84-SV48000-0010 integrates into standard IP surveillance infrastructure via ONVIF-compatible network video recorders (NVRs) and video management systems supporting H.264 streams. Connect via PoE+ network cabling—power and data over a single Ethernet run simplifies installation on poles and rooftops where a separate power supply would require additional conduit. Compatible with any NVR or VMS that accepts ONVIF IP camera streams, including Geovision's own recording appliances and third-party platforms supporting standard video codec playback.

Installation Notes

Mount on pole brackets, rooftop pedestals, or wall plates rated for PTZ equipment load (confirm torque specifications with your mounting hardware vendor). Run PoE+ capable network cable (Cat5e minimum, Cat6 preferred for longer runs exceeding 100m) from a PoE+ switch to the camera—standard 802.3at PoE is insufficient; verify your switch provides PoE+ (30W minimum budget per port). Outdoor installations require weatherproof network connectors and cable glands. Confirm your switch's PoE power budget accommodates the PTZ draw before commissioning. Do not operate below stated environmental limits; consult the full datasheet for thermal and moisture specifications for your climate zone.