Geovision 84-TBL480W-0010 4MP Bullet IP Camera

Geovision 84-TBL480W-0010 4MP Bullet IP Camera

Overview

The Geovision 84-TBL480W-0010 is a 4MP bullet camera engineered for straightforward deployment in retail, office, industrial, and perimeter environments where consistent image quality and reliable low-light performance are non-negotiable. The compact bullet form factor minimizes visual impact while delivering sharp, identification-grade detail across diverse monitoring scenarios.

Key Technical Attributes

Resolution & Compression: 4MP sensor captures crisp evidence-quality footage. H.265 codec reduces bandwidth and storage overhead by roughly 50% compared to H.264 on identical bitrate targets—a meaningful advantage when recording 24/7 across multiple cameras and your network or NVR storage budget is constrained.

Low-Light & WDR: Native infrared (850nm) extends surveillance into complete darkness without auxiliary lighting. WDR Pro processing handles mixed-lighting scenes—bright windows alongside shadowed interiors—delivering usable detail in both zones without HDR halo artifacts. This matters in retail floor applications or office perimeters where you need consistent forensic-grade video across sun-blasted entrances and dim back corridors.

Network Integration: PoE-powered via standard IPCAM cabling—no separate power supply needed at camera. Supports ONVIF and standard IP protocols, integrating seamlessly into mixed-vendor VMS environments (Geovision, third-party NVR platforms, and legacy systems) without proprietary lock-in. Draws efficient power typical of 4MP IP cameras, minimizing switch power-budget strain.

Compatibility

Compatible with any PoE-enabled NVR, network switch, or VMS system supporting ONVIF Profile S or standard RTSP/MJPEG IP camera protocols. Works directly with Geovision management platforms and third-party video management systems (Milestone, Genetec, etc.) supporting H.265 decoding. Standard RJ-45 IPCAM cabling—no specialized connectors.

Installation Notes

Bullet housing rated for outdoor and semi-exposed mounting. Use standard camera mounts and wall/ceiling brackets compatible with M12 or 1/4-inch tripod sockets. Confirm your PoE switch or injector supplies sufficient power for 4MP streaming (typically 12–15W per camera). No specialized tools required—standard crimpers and RJ-45 termination are adequate.