Geovision products
-
Save $10.01
Geovision 55-Enpos-300 Gv-Data Capture V3E POS Interface
POS interface module that bridges point-of-sale systems with Geovision surveillance infrastructure
- Synchronizes POS transaction logs with Geovision VMS footage in real time.
- Connects over standard Ethernet — no serial breakout or special power required.
- Enables timestamped transaction-to-video correlation for loss-prevention review.
Usually Ships in 2-3 Weeks Free shipping over $499$225.00 $214.99 Save $10.01 -
Save $555.01
Geovision GV-650 D-Type 16 Camera Card 55-650D4-160
16-channel video capture card designed to expand recording capacity in professional surveillance systems
- Adds 16 camera channels to an existing GV-650 series recorder without replacing the unit.
- Internal PCI card installation requires no external power supply or additional cabling.
- Geovision software auto-detects new channels after seating, streamlining camera assignment.
Usually Ships in 2-3 Weeks Free shipping over $499$935.00 $379.99 Save $555.01 -
Save $1.01
Geovision 125-TBL2706-4F10 IP Camera Cable
Purpose-built IP camera cable engineered to carry both video data and power to Geovision surveillance cameras and compatible networked security
- Carries Ethernet data and PoE power over a single run, eliminating separate power cabling.
- Rated for indoor and outdoor deployment, suited for commercial security environments.
- Factory-specified for Geovision IP camera systems, ensuring validated compatibility.
Usually Ships in 2-3 Weeks Free shipping over $499$128.00 $126.99 Save $1.01 -
Save $498.01
Geovision 55-800D4-080 GV-800 D-Type 8 Camera Card
N 8-channel capture card designed to expand multi-camera recording capacity in GV-800 series DVR and NVR platforms
- Adds 8 simultaneous camera channels to compatible GV-800 series DVR/NVR systems.
- D-Type connector interfaces directly with standard surveillance camera cabling.
- Installs internally via host backplane—no external power or additional cabling needed.
Usually Ships in 2-3 Weeks Free shipping over $499$925.00 $426.99 Save $498.01 -
Save $0.01
Geovision 54-FE145-001 GV-MOUNT 904 Fisheye Wall Mount
Wall-mounted bracket engineered for Geovision fisheye camera installations
- Wall-mount bracket engineered for Geovision GV-Fisheye camera family installations.
- 180-degree tilt adjustment lets you precisely aim fisheye optics to eliminate dead zones.
- Mounts to drywall or masonry walls, supporting flexible deployment in varied environments.
Usually Ships in 2-3 Weeks Free shipping over $499$27.00 $26.99 Save $0.01 -
Save $0.01
Geovision 84-Batbo-100 Gv-Battery Box
Dedicated battery enclosure designed to centralize power management and distribution within Geovision surveillance deployments
- Centralizes battery backup and AC control cabling for Geovision surveillance deployments.
- Box form factor suits rack, server closet, or equipment room installations.
- Modular design lets you provision battery capacity to match your specific runtime needs.
Usually Ships in 2-3 Weeks Free shipping over $499$66.00 $65.99 Save $0.01 -
Save $0.01
Geovision 54-VD901-000 GV-MOUNT 901 Pendant Mount
Pendant-style ceiling mount designed to suspend dome and compact camera models from overhead surfaces
- Pendant-style ceiling mount suspends dome and compact Geovision cameras overhead.
- Includes secure camera attachment hardware, simplifying installation for integrators.
- Designed for indoor ceiling deployments where wall or corner mounting is not preferred.
Usually Ships in 2-3 Weeks Free shipping over $499$39.00 $38.99 Save $0.01 -
Save $0.04
Geovision 51-MT91700-EFD1 GV-MOUNT 917 Dome Housing
Protective dome housing designed to enclose and mount Geovision's EFD2101 and EFD3101 dome cameras
- Engineered specifically for EFD2101 and EFD3101 dome cameras ensuring secure fit.
- Supports ceiling and wall mounting to standardize camera positioning across deployments.
- Protective enclosure shields optics from dust and weathering in indoor or outdoor installs.
Usually Ships in 2-3 Weeks Free shipping over $499$85.03 $84.99 Save $0.04 -
Save $64.25
Geovision 115-TFD4800-0010 4MP AI IR Mini Camera
4MP fixed mini turret designed for discrete 24/7 surveillance in spaces where traditional dome or bullet housings create aesthetic or spatial friction
- 4MP fixed 2.8mm lens delivers evidence-grade detail with no pan-tilt complexity.
- WDR Pro preserves highlight and shadow detail in mixed-lighting entryways and corridors.
- ONVIF Profile S/T/G and PoE RJ-45 support enables drop-in integration with existing NVRs.
Usually Ships in 2-3 Weeks Free shipping over $499$248.24 $183.99 Save $64.25 -
Save $0.01
Geovision 51-SDMT908-MP02 In-Ceiling Mounting Kit
N in-ceiling mounting kit designed for Geovision IP PTZ cameras
- Flush in-ceiling mount delivers clean installation with minimal visible hardware.
- Includes all brackets and fasteners, reducing on-site parts sourcing time.
- Maintenance access without panel removal speeds servicing of PTZ cameras.
Usually Ships in 2-3 Weeks Free shipping over $499$220.00 $219.99 Save $0.01 -
Save $448.01
Geovision AS-GV810 Controller (one-way - 84-AS81000-010U
Compact access control module that manages up to eight doors under one-way control (reader trigger → lock) or four doors under two-way control
- Controls up to 8 doors one-way or 4 doors two-way from a single module.
- Native 26-bit and 34-bit Wiegand support eliminates protocol converters at install.
- Runs on 12 VDC and mounts in standard equipment enclosures for clean rack integration.
Usually Ships in 2-3 Weeks Free shipping over $499$1,100.00 $651.99 Save $448.01 -
Save $0.01
Geovision Gv-Mount 207 51-MT20700-M001 Mount
Dedicated mounting bracket engineered for IP PTZ camera installations
- Engineered for Geovision IP PTZ cameras, ensuring proper load bearing under motor operation.
- Supports pole, wall, and ceiling installs, covering perimeter and facility-wide PTZ deployments.
- Minimal-fastener design reduces on-site assembly time and simplifies camera repositioning.
Usually Ships in 2-3 Weeks Free shipping over $499$96.00 $95.99 Save $0.01 -
Save $0.01
Geovision 51-MT21010-0000 MOUNT 210-1 Wall Bracket
Dual-purpose wall and rack mount bracket for Geovision surveillance cameras
- Supports both wall and rack mounting to fit fixed surveillance deployment scenarios.
- Accommodates vertical and horizontal camera orientations for flexible field-of-view setup.
- Includes installation hardware, reducing additional parts sourcing during Geovision deployments.
Usually Ships in 2-3 Weeks Free shipping over $499$139.00 $138.99 Save $0.01 -
Save $0.01
Geovision AS110 - 84-AS110-100U
Compact three-in-one access control unit combining panel, card reader, and keypad in a single form factor
- Combines panel, card reader, and keypad in one unit to reduce mounting space and wiring.
- Configured for North American electrical standards, simplifying US-based deployments.
- Designed for interior use; enclose in weatherproof housing for any outdoor installation.
Usually Ships in 2-3 Weeks Free shipping over $499$218.00 $217.99 Save $0.01 -
Save $60.01
Geovision 51-MT10200-0000 Straight Tube Box Mount
Straight tube box mount designed to secure IP PTZ cameras in indoor and outdoor surveillance deployments
- Rigid straight-tube design eliminates bracket flex, preserving PTZ tracking accuracy.
- Aluminum/steel hybrid construction resists corrosion and thermal stress in outdoor installs.
- Compatible with M10/M12 hardware and Geovision PTZ quick-release plates for fast fitment.
Usually Ships in 2-3 Weeks Free shipping over $499$341.00 $280.99 Save $60.01 -
Save $0.01
Geovision 150-MT903-ALL GV-MOUNT 903-VD V3 Dome Camera Mount
Specialized mounting bracket engineered for secure installation of Geovision V3 dome-style IP cameras
- Designed specifically for Geovision 903-VD V3 dome cameras, ensuring precise fit.
- Supports ceiling or wall installation for flexible fixed-position surveillance deployments.
- Weather-resistant construction suits both indoor and outdoor mounting environments.
Usually Ships in 2-3 Weeks Free shipping over $499$55.00 $54.99 Save $0.01 -
Save $0.01
Geovision 42-P11SDV2-0L02 SD V2 Cover
Protective SD card slot cover designed for Geovision SD V2 series surveillance equipment
- Direct replacement cover fits Geovision SD V2 series devices with positive retention.
- Shields SD card slot from dust, moisture, and debris to prevent read/write failures.
- Tool-free installation lets field technicians swap the cover without downtime.
Usually Ships in 2-3 Weeks Free shipping over $499$103.00 $102.99 Save $0.01 -
Save $0.58
Geovision GV-MOUNT205 150-MT205-000 Wall Mount Bracket
Dual-purpose mounting bracket for wall and rack installation
- Supports both wall and rack installation from a single bracket, reducing SKU overhead.
- Compact 203×160 mm footprint fits standard mounting surfaces in tight deployments.
- Designed for Geovision camera systems, ensuring compatibility across your existing install base.
Usually Ships in 2-3 Weeks Free shipping over $499$68.57 $67.99 Save $0.58 -
Save $250.01
Geovision 81-SRFD190-00US GV-RU9003 PTZ Camera Cable
Specialized cable assembly designed for Geovision GV-RU9003 IP PTZ cameras
- Purpose-built for GV-RU9003 PTZ cameras, ensuring verified pinout and connector fit.
- Combines Ethernet and motor control signals in one shielded cable assembly.
- Drop-in replacement simplifies recommissioning failed PTZ cable runs on existing installs.
Usually Ships in 2-3 Weeks Free shipping over $499$870.00 $619.99 Save $250.01 -
Save $0.01
Geovision 81-PB210-001 PB21 Push Button Green
Hardwired push button control accessory designed for Geovision access control and security system integration
- Passive switch design requires no external power supply or added electronics.
- Green color coding enables fast visual identification in multi-button panel layouts.
- 35mm body fits standard wall-mounted control enclosures for straightforward installation.
Usually Ships in 2-3 Weeks Free shipping over $499$35.00 $34.99 Save $0.01




