Panduit CU QN TRUNKCAT6UTP Plenum Stdpkg 19FT PK1 - QCPBCCB0001F019

Panduit QCPBCCB0001F019 Category 6 UTP Copper Trunk Cable, Plenum, 19 ft

Overview

The Panduit QCPBCCB0001F019 is a 19-foot Category 6 unshielded twisted pair (UTP) copper trunk cable rated for plenum air-handling spaces. Designed for structured cabling deployments in enterprise network infrastructure, data centers, and telecommunications rooms, this factory-terminated trunk assembly eliminates field termination labor while delivering verified 250 MHz bandwidth and 1 Gbps data throughput across the link. As part of Panduit's copper connectivity line, the QCPBCCB0001F019 ships as a single-pack standard package — sized for patching between nearby distribution frames or connecting equipment within a single rack zone.

The plenum (CMP) jacket rating means this cable can run through air-handling plenums and dropped-ceiling return-air spaces without additional conduit, which matters for code compliance in commercial buildings where non-plenum cable would require containment. That simplifies routing in open-ceiling deployments and avoids the cost of rigid conduit just for a short trunk run.

Key Features

• 250 MHz Bandwidth: Cat6 at 250 MHz gives you headroom well beyond the 100 MHz floor required for Gigabit Ethernet — useful when your switch infrastructure is already cabled for 10GBASE-T at shorter distances, or when you want margin against crosstalk degradation over time in dense cable trays.
• 1 Gbps Data Rate: Full Gigabit throughput across the 19-foot run. At this length, signal integrity is not the limiting factor — the structured cabling system design and switch port capability are. This cable won't be your bottleneck.
• UTP Construction: Unshielded twisted pair keeps the assembly flexible and termination simple. In a clean data center or TR environment with properly managed power separation, UTP performs identically to shielded alternatives and avoids the grounding requirements that STP/FTP adds to installation complexity.
• Plenum (CMP) Jacket Rating: Satisfies NEC Article 800 requirements for cables installed in air-handling spaces without conduit. If your cable path runs above a dropped ceiling used as a return-air plenum, this is the rating you need — riser (CMR) cable is not a compliant substitute in those spaces.
• TIA-568-C.2 and ISO/IEC 11801 Compliance: Both North American (TIA) and international (ISO/IEC) standards are met, so this cable integrates cleanly into certified channel installations and supports warranty claims on end-to-end structured cabling systems from standards-compliant manufacturers.
• UL Listed: UL listing provides AHJ (authority having jurisdiction) acceptance in jurisdictions that require it for plenum-rated cables. Relevant when pulling permits or satisfying building inspections on commercial construction projects.
• Factory-Terminated Trunk Assembly: Pre-terminated trunks eliminate variability introduced by field termination — no punch-down tool errors, no mis-pair risk, and consistent insertion loss across every connector. For a 19-foot run between adjacent frames, this is a net labor savings versus bulk cable plus field termination.
• 19-Foot Fixed Length: Sized for short horizontal connections — adjacent rack-to-rack, patch panel to distribution switch, or TR-to-TR within a single room. If your run is longer or your topology requires a different span, this length is not adjustable; plan rack spacing before ordering.

Integration & Compatibility

The QCPBCCB0001F019 is compatible with any Cat6-compliant port or patch panel jack conforming to TIA-568-C.2 or ISO/IEC 11801. It integrates into Panduit's QuickNet (QN) modular cabling system, which uses pre-terminated cassette assemblies and trunk cables to build high-density, modular patch panel infrastructure without field termination. In mixed-vendor environments, the standard RJ-45 interface ensures plug compatibility with switch ports, patch panels, and cassette modules from other manufacturers, provided those components are also Cat6-rated.

This cable is appropriate for deployments targeting 10/100/1000BASE-T Ethernet. It is not rated or warranted for 10GBASE-T, which requires Cat6A (500 MHz) for runs beyond a few meters. Plan accordingly if your environment is upgrading to 10G switching in the near term.

Frequently Asked Questions

Q: What is the jacket rating of the QCPBCCB0001F019, and where can it be installed?

A: The QCPBCCB0001F019 carries a plenum (CMP) jacket rating, making it suitable for installation in air-handling plenum spaces such as above dropped ceilings used as return-air paths. It meets NEC Article 800 requirements for these environments without requiring conduit.

Q: Does the QCPBCCB0001F019 support 10 Gigabit Ethernet?

A: No. The QCPBCCB0001F019 is a Category 6 cable rated at 250 MHz and 1 Gbps. 10GBASE-T requires Category 6A (500 MHz bandwidth) for runs beyond approximately 37 meters. This cable is not warranted for 10G applications.

Q: What standards does the QCPBCCB0001F019 comply with?

A: The QCPBCCB0001F019 meets TIA-568-C.2 (North American structured cabling standard), ISO/IEC 11801 (international cabling standard), and is UL Listed for plenum applications.

Q: Is the QCPBCCB0001F019 shielded?

A: No. This is an unshielded twisted pair (UTP) cable. It does not require grounding or shielded connectors. In environments with significant electromagnetic interference, a shielded variant should be considered instead.

Q: What cabling system does this trunk cable belong to?

A: The QCPBCCB0001F019 is part of Panduit's QuickNet (QN) pre-terminated copper cabling system, designed for modular high-density data center and TR deployments using factory-terminated trunk assemblies and cassette patch panels.