Panduit CU QN TRUNKCAT6UTP Plenum Stdpkg 29FT PK1 - QCPBCCB0001F029

Panduit QCPBCCB0001F029 Cat6 UTP Plenum Copper Trunk Cable 29ft

Overview

The Panduit QCPBCCB0001F029 is a 29-foot Category 6 unshielded twisted-pair (UTP) copper trunk cable rated for plenum-space installation — the pre-terminated, fixed-length format that eliminates field termination labor in structured cabling deployments. Designed for enterprise network infrastructure, data centers, and telecommunications rooms, it runs at 250 MHz bandwidth and delivers 1 Gbps data throughput, meeting TIA-568-C.2, ISO/IEC 11801, and UL Listed requirements. If you're provisioning a high-density IDF or MDF environment where consistent, pre-tested performance matters more than field flexibility, this is the cable format to evaluate.

The 29-foot length targets horizontal runs from patch panels to wall outlets, or intra-rack and inter-rack connections in structured wiring deployments where field-terminated patch cords introduce unnecessary variability. Panduit's QuickNet trunk cabling system is built around plug-and-play deployment — pull, connect, and move on.

Key Features

• 250 MHz Bandwidth: Cat6 at 250 MHz gives you headroom beyond the 100 MHz minimum for Fast Ethernet — relevant if your switching infrastructure runs mix-speed environments or you're planning a lifecycle beyond 1GbE on this segment. It won't bottleneck 1G links, and the extra margin means better signal integrity in longer or noisier runs.
• 1 Gbps Data Rate: Supports full gigabit throughput end-to-end, making this the right choice for IP camera backbones, VoIP infrastructure, access control head-end connections, and general enterprise LAN distribution. Not rated for 10GbE — if your switching fabric runs 10G to the edge, upgrade to Cat6A.
• UTP (Unshielded) Construction: No foil or braid shielding means lower termination complexity, lighter weight, and easier routing through conduit. The tradeoff: UTP depends on proper bonding-and-grounding practice and adequate separation from EMI sources. In well-managed data centers and telecom rooms — the stated application — this is a non-issue. In high-interference industrial environments, consider shielded variants.
• Plenum (CMP) Rating: The plenum jacket is rated for air-handling spaces above drop ceilings and below raised floors — the zones where building codes mandate low-smoke, low-flame materials. Installing a non-plenum cable in a plenum space fails fire code and creates liability; this cable eliminates that risk without needing conduit as a workaround.
• TIA-568-C.2 and ISO/IEC 11801 Compliance: These are the governing standards for structured copper cabling in North America and internationally. Specifying a TIA-568-C.2-compliant cable means your installation satisfies the cabling requirements for virtually every enterprise warranty program and premises certification. ISO/IEC 11801 compliance extends that to international projects.
• UL Listed: UL Listing means the cable has been independently tested and verified for the safety and performance claims on the label. It's the baseline requirement for commercial building inspections in the US — a non-negotiable for any permitted installation.
• Pre-Terminated Trunk Format: Factory termination removes field variability — no punch-down errors, no mis-wired pairs, no inconsistent insertion loss across your run. In high-density deployments where you're connecting hundreds of ports, the time savings and defect-rate reduction over field termination are material. The QCPBCCB0001F029's 29-foot fixed length suits specific structured cabling topologies; measure your runs before ordering since trunk cables are not field-adjustable.

Integration and Compatibility

The QCPBCCB0001F029 integrates into Panduit's QuickNet structured cabling ecosystem — patch panels, zone enclosures, and modular cassettes that accept pre-terminated trunk assemblies. The Cat6 UTP format is compatible with any TIA-568-compliant RJ-45 infrastructure, including PoE switches, IP cameras, VoIP phones, access control panels, and wireless access points drawing power over standard 802.3af or 802.3at PoE. For IP security cameras and access control head-ends in data center or telecom room environments, this cable handles both data and PoE delivery on a single run. If you're integrating into a managed PoE switch infrastructure, the UTP Cat6 construction supports the full PoE power budget at this length without meaningful voltage drop concerns. Pair with Panduit patch panels and zone enclosures for a certified end-to-end structured cabling channel. Consult a structured cabling planning guide for run-length and channel-loss calculations before finalizing trunk lengths.

Frequently Asked Questions

Q: What is the maximum data rate supported by the QCPBCCB0001F029?

A: The QCPBCCB0001F029 is rated for 1 Gbps at 250 MHz bandwidth. It meets Cat6 (TIA-568-C.2) specifications for gigabit Ethernet but is not rated for 10GbE applications — those require Cat6A or higher.

Q: Can the QCPBCCB0001F029 be installed in a plenum ceiling space?

A: Yes. This cable carries a plenum (CMP) rating, making it code-compliant for installation in air-handling spaces including above drop ceilings and below raised floors where building codes require low-smoke, low-flame materials.

Q: Is the QCPBCCB0001F029 shielded or unshielded?

A: It is UTP — unshielded twisted pair. This suits standard data center and telecom room environments. For installations with significant EMI exposure, consider a shielded (STP or F/UTP) Cat6 variant instead.

Q: What standards does the QCPBCCB0001F029 meet?

A: It complies with TIA-568-C.2 (North American structured cabling standard), ISO/IEC 11801 (international equivalent), and carries UL Listing for safety verification in US commercial installations.

Q: Does the QCPBCCB0001F029 support PoE?

A: Yes. Cat6 UTP at 29 feet handles standard PoE (802.3af, up to 15.4W) and PoE+ (802.3at, up to 30W) delivery without issue. The short run length means negligible resistive loss on power delivery.

Q: Is the QCPBCCB0001F029 a field-terminatable cable or a pre-terminated assembly?

A: It is a pre-terminated trunk cable assembly in a fixed 29-foot length. It is not designed for field re-termination. Verify your run lengths before ordering — trunk cables are length-specific and cannot be adjusted on site.

Ted Perry

The QCPBCCB0001F029 is a straightforward cable buy with one important constraint that catches integrators off guard: the 29-foot fixed trunk length is factory-set. Unlike a bulk spool or a field-terminated patch cord, you're committing to this dimension at order time. The 250 MHz Cat6 UTP spec is well-matched to 1GbE distribution in data center horizontal cabling, but the trunk format is where this product earns its place — factory termination at both ends means every port in your panel comes up clean, no variation from tech to tech.

Technical Highlights:

• 250 MHz Cat6 Bandwidth: Provides 2.5x the bandwidth floor of Cat5e — relevant margin for signal integrity at 1Gbps over the full 100-meter channel, though at 29 feet you're well within budget for any Cat6 application.
• UL Listed + TIA-568-C.2: Both certifications are required for permitted commercial installation in the US. The TIA compliance also satisfies the cabling requirements for most enterprise system warranties — cameras, switches, access control panels included.
• Plenum (CMP) Rating: Eliminates the conduit workaround in plenum spaces. In a high-density MDF/IDF build where plenum runs are common, using CMP-rated trunk cable directly saves conduit material cost and labor on every run.

Deployment Considerations:

• Trunk cables are fixed-length, not adjustable. Measure every run before ordering — a 29-foot trunk on a 22-foot run creates slack management overhead in a high-density panel environment; a 29-foot trunk on a 31-foot run doesn't reach. Get your floor plans confirmed first.
• UTP construction is appropriate for data centers and clean telecom rooms. If your deployment routes near high-voltage panels, VFDs, or heavy electrical equipment, the lack of shielding becomes a real consideration — switch to a shielded Cat6 trunk variant for those specific runs.

The QCPBCCB0001F029 is best suited for structured cabling deployments in data centers and enterprise telecom rooms where runs have been pre-measured and the Panduit QuickNet ecosystem is already in use — the fixed trunk format only pays off when the rest of the infrastructure is built around it.