Hanwha C6403RW vs i-PRO S66300-Z3: Specification Comparison
Both the Hanwha XNP-C6403RW and the i-PRO WV-S66300-Z3 are 2MP outdoor PTZ dome cameras with AI analytics, designed for perimeter and wide-area surveillance installations. The Hanwha delivers a 40x optical zoom and 200m IR with an integrated wiper, while the i-PRO offers 32x optical zoom and FIPS 140-2 Level 3 security certification. This comparison examines imaging performance, environmental suitability, and integration capabilities to help installers and IT buyers determine which unit fits their deployment requirements.
In This Guide
How do the imaging specs compare?
Both cameras use a 1/2.8" CMOS sensor at 1920×1080 resolution and 60 fps. The Hanwha XNP-C6403RW provides a 4.25–170mm lens at 40x optical zoom, achieving a tele DORI identify range of 234m. The i-PRO WV-S66300-Z3 covers 4.25–136mm at 32x optical zoom (extendable to 48x at 1280×720 resolution), with a tele DORI identify range of 183.3m. The Hanwha's longer focal length and greater optical zoom give it a meaningful reach advantage at full 1080p resolution.
In low-light performance, the i-PRO specifies a minimum illumination of 0.006 lux, compared to the Hanwha's 0.05 lux color / 0 lux IR. The Hanwha includes an integrated IR illuminator rated to 200m, whereas the i-PRO spec sheet lists no IR LED. The Hanwha's WDR is rated at 150dB (Extreme WDR), while the i-PRO achieves a maximum of 144dB (Super Dynamic at Level 31). The Hanwha pan speed reaches 500°/sec preset versus the i-PRO's 700°/sec preset; tilt preset speed is 350°/sec (Hanwha) vs. 500°/sec (i-PRO), giving the i-PRO a speed advantage in high-speed PTZ applications.
What about installation and environment?
Both cameras carry IP66, IK10, NEMA 4X ratings and are PoE++ (IEEE 802.3bt, Class 6) powered. The Hanwha draws a typical 26W / max 46W; the i-PRO specifies 37.8W PoE++. The Hanwha is rated for –40°C to +55°C operation; the i-PRO is rated for –50°C to +60°C, offering a broader thermal operating envelope on both ends. Both include a built-in gyro-based image stabilizer.
The Hanwha XNP-C6403RW includes an integrated wiper and lens heater for precipitation management, a feature not listed in the i-PRO specification. The Hanwha is physically larger (ø184.9×318.8mm, 5,600g) versus the i-PRO (max ø167×205mm, approx. 3,000g). The i-PRO additionally specifies wind resistance up to 40 m/s (approx. 89 mph), a spec not provided in the Hanwha datasheet. The Hanwha lists a broad accessory mounting ecosystem (SBP-series wall, pole, parapet, corner, and cabinet mounts); i-PRO mounting accessories are not enumerated in the provided spec.
Which fits your VMS and analytics better?
Both cameras support ONVIF Profiles G, M, S, and T, H.265/H.264/MJPEG compression, and microSD/SDXC edge storage. The Hanwha provides dual SD card slots for up to 1TB (512GB×2); the i-PRO offers a single microSDXC slot with no stated capacity maximum in the provided spec. The Hanwha supports up to 20 unicast and 128 multicast viewers with 10 streaming profiles; the i-PRO supports up to 14 simultaneous users. The Hanwha additionally lists SUNAPI and Wisenet native APIs alongside ONVIF.
On analytics, the Hanwha provides AI-based object detection (Person, Face, Vehicle, License Plate), virtual line crossing, virtual area intrusion, and object auto-tracking (Person/Vehicle) via its WiseNR II / WiseStream III engine. The i-PRO offers AI Video Motion Detection, AI Face Detection, AI People Detection, AI Vehicle Detection, AI Non-Mask Detection, AI Occupancy Detection, AI Scene Change Detection, and AI Sound Classification (Gunshot, Yell, Vehicle Horn, Glass Break). The i-PRO includes four audio input terminals (3.5mm stereo) and one audio output, plus 4 alarm I/O terminals (3 in, 1 out). The Hanwha spec notes alarm I/O only via optional SPM-4210 I/O box. On security certification, the i-PRO is rated FIPS 140-2 Level 3; the Hanwha achieves FIPS 140-2 Level 2 via TPM.
Which should you choose: the C6403RW or the S66300-Z3?
Our take: The XNP-C6403RW is the stronger choice when maximum optical reach, integrated IR illumination, and an on-board wiper are the primary requirements. Its 40x optical zoom (vs. 32x) extends the tele DORI identify range to 234m versus the i-PRO's 183.3m — a 28% reach advantage — and its 200m IR illuminator enables standalone night coverage the i-PRO cannot provide without external lighting. Dual SD slots (up to 1TB) also double on-board storage capacity. The WV-S66300-Z3 is preferable when faster preset slew speeds (700°/s pan vs. 500°/s), a wider operating temperature range (–50°C to +60°C vs. –40°C to +55°C), FIPS 140-2 Level 3 compliance, native audio I/O without add-on hardware, AI Sound Classification, and a lighter enclosure (3 kg vs. 5.6 kg) are decision-critical. Specify the i-PRO for high-security or government deployments requiring Level 3 cryptographic certification and audio-based threat detection; specify the Hanwha where IR self-sufficiency and long-range identification at full 1080p are non-negotiable.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | Hanwha C6403RW | i-PRO S66300-Z3 |
|---|---|---|
| Resolution | 1920×1080 (2MP) | 1920×1080 (2MP) |
| Image Sensor | 1/2.8" CMOS | 1/2.8" CMOS (5.57×3.13mm) |
| Optical Zoom / Focal Length | 40x / 4.25–170mm | 32x (48x at 720p) / 4.25–136mm |
| Min. Illumination | 0.05 lux color / 0 lux IR | 0.006 lux |
| IR Illuminator / Range | Built-in Wise IR / 200m | Not specified in provided spec |
| WDR | 150dB Extreme WDR | 144dB (Super Dynamic Level 31) |
| Max Frame Rate | 60 fps | 60 fps |
| Pan Speed (Preset) | 500°/sec | 700°/sec |
| Tilt Speed (Preset) | 350°/sec | 500°/sec |
| Tele DORI Identify Range | 234m (767.8ft) | 183.3m (601.4ft) |
| Video Compression | H.265 / H.264 / MJPEG | H.265 / H.264 / MJPEG |
| IP Rating | IP66 | IP66, NEMA 4X |
| Impact Rating | IK10 | IK10 |
| Operating Temperature | -40°C to +55°C | -50°C to +60°C |
| Power Input / PoE Class | PoE++ IEEE 802.3bt / Class 6 / Max 46W | PoE++ / Class 6 / 37.8W |
| Edge Storage | Dual microSD slot / up to 1TB (512GB×2) | Single microSDXC / capacity not specified |
| Audio I/O | Via optional SPM-4210 I/O box | 4× 3.5mm input, 1× 3.5mm output (built-in) |
| Alarm I/O | Via optional SPM-4210 I/O box | 3 inputs / 1 output (built-in) |
| FIPS Certification | FIPS 140-2 Level 2 (TPM) | FIPS 140-2 Level 3 |
| Integrated Wiper | Yes (with lens heater) | — |
| Weight | 5,600g (12.34 lb) | Approx. 3,000g (6.6 lb) |
| Dimensions | ø184.9×318.8mm | ø167×205mm |
| ONVIF Profiles | G / M / S / T | G / M / S / T |
| Warranty | 3-year | 5-year |
Frequently Asked Questions
Which should you choose: the C6403RW or the S66300-Z3?
The XNP-C6403RW is the stronger choice when maximum optical reach, integrated IR illumination, and an on-board wiper are the primary requirements. Its 40x optical zoom (vs. 32x) extends the tele DORI identify range to 234m versus the i-PRO's 183.3m — a 28% reach advantage — and its 200m IR illuminator enables standalone night coverage the i-PRO cannot provide without external lighting. Dual SD slots (up to 1TB) also double on-board storage capacity. The WV-S66300-Z3 is preferable when faster preset slew speeds (700°/s pan vs. 500°/s), a wider operating temperature range (–50°C to +60°C vs. –40°C to +55°C), FIPS 140-2 Level 3 compliance, native audio I/O without add-on hardware, AI Sound Classification, and a lighter enclosure (3 kg vs. 5.6 kg) are decision-critical. Specify the i-PRO for high-security or government deployments requiring Level 3 cryptographic certification and audio-based threat detection; specify the Hanwha where IR self-sufficiency and long-range identification at full 1080p are non-negotiable.
Is the XNP-C6403RW or WV-S66300-Z3 better for low-light performance without external lighting?
The XNP-C6403RW is better suited for standalone low-light use: it includes a built-in IR illuminator rated to 200m and achieves 0 lux with IR active. The WV-S66300-Z3 specifies a lower minimum illumination in color mode (0.006 lux vs. 0.05 lux), but the provided spec does not list an IR LED, meaning it requires external lighting to operate in true darkness.
Which camera offers stronger cybersecurity credentials?
The WV-S66300-Z3 specifies FIPS 140-2 Level 3 certification. The XNP-C6403RW specifies FIPS 140-2 Level 2 via its TPM module. Both support HTTPS, 802.1X, and signed firmware. Deployments with federal or high-security mandates requiring Level 3 cryptographic validation should specify the i-PRO.
Do both cameras support audio, and do they need add-on hardware for alarm I/O?
The WV-S66300-Z3 has four built-in 3.5mm audio inputs, one audio output, and four alarm I/O terminals (3 in, 1 out) integrated into the camera body. The XNP-C6403RW's spec notes alarm output and audio functionality are available via the optional SPM-4210 I/O box — that accessory is not included with the base camera.
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.