Geovision TBL8710-000 vs Geovision TBL8804-0010: Specification Comparison
Both the Geovision TBL8710-000 and TBL8804-0010 are 8MP outdoor IR bullet cameras from the same manufacturer, sharing the same resolution class and fixed form factor. A buyer evaluating either for perimeter or entrance coverage would naturally cross-shop these two models. This comparison examines how they differ across imaging performance, physical installation requirements, and VMS integration capability, drawing strictly from the published specifications for each model.
In This Guide
How do the imaging specs compare?
Both cameras deliver 8MP resolution, with the TBL8710-000 explicitly rated at 3840×2160 (4K UHD). The TBL8804-0010 is also listed at 8MP but no pixel-dimension breakdown is provided in the available specs. Both employ H.265 compression and WDR Pro for high-contrast scene handling. The TBL8710-000 specifies a 4.3mm fixed lens with 4.3× optical zoom noted, and its minimum illumination is characterized as Super Low Lux. The TBL8804-0010 does not specify a focal length or minimum illumination figure in the provided data.
Both cameras include integrated IR night vision. Neither datasheet entry specifies IR range in meters, sensor size, or maximum frame rate in the provided specs, so no numerical comparison on those points is possible. The TBL8710-000's Super Low Lux designation indicates a low-light performance claim, but no lux value is given; the TBL8804-0010 provides no equivalent low-light characterization at all.
What about installation and environment?
Both products share a bullet form factor suited for directional outdoor mounting. The TBL8710-000 lists Wall and Soffit as supported mount types. No mount type data is provided for the TBL8804-0010. Neither camera's provided specs include IP ingress protection rating, IK impact rating, operating temperature range, power input method, PoE class, dimensions, or weight, so no comparison on environmental or power specifications is possible from the available data.
The TBL8710-000 is categorized under Cable Category 'IPCAM', while the TBL8804-0010 is categorized under 'Accessories' — a likely catalog classification difference rather than a meaningful product distinction, but installers should confirm the correct category assignment before ordering.
Which fits your VMS and analytics better?
The TBL8710-000 explicitly lists ONVIF compliance (Yes) and VMS compatibility via RTSP/ONVIF, confirming interoperability with any standards-based VMS or NVR. The TBL8804-0010 does not include an ONVIF field or VMS compatibility field in its provided specifications; ONVIF support cannot be confirmed or denied from the data supplied.
Neither camera's provided specs reference edge analytics, on-board storage (SD card), audio input/output, or alarm I/O. These are common decision factors for integrators but cannot be compared here due to absent spec data on both models.
Which should you choose: the TBL8710-000 or the TBL8804-0010?
Our take: The TBL8710-000 is the better-documented choice when ONVIF/RTSP VMS interoperability is a hard requirement, as it is the only model with confirmed ONVIF compliance in the provided specs. It also specifies a 4.3mm fixed focal length and Super Low Lux minimum illumination, giving installers concrete design parameters — data absent from the TBL8804-0010 spec sheet. Both cameras share the same 8MP resolution and WDR Pro capability, so imaging parity is the baseline. However, the TBL8710-000's spec set is materially more complete: it adds pixel resolution (3840×2160), mount type (Wall/Soffit), and VMS protocol details. For either model, critical installation parameters — IP rating, operating temperature, PoE class, IR range, and dimensions — are not present in the supplied data and must be verified against the full datasheets before specifying either camera for a project.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | Geovision TBL8710-000 | Geovision TBL8804-0010 |
|---|---|---|
| Resolution | 8 MP (3840×2160) | 8 MP |
| Form Factor | Bullet | Bullet |
| Lens / Focal Length | 4.3mm fixed (4.3× optical zoom noted) | — |
| Min Illumination | Super Low Lux | — |
| IR Night Vision | Yes | Yes |
| WDR | WDR Pro | WDR Pro |
| Video Compression | H.265 | H.265 |
| ONVIF | Yes | — |
| VMS Compatibility | RTSP / ONVIF | — |
| Mount Type | Wall; Soffit | — |
Frequently Asked Questions
Which should you choose: the TBL8710-000 or the TBL8804-0010?
The TBL8710-000 is the better-documented choice when ONVIF/RTSP VMS interoperability is a hard requirement, as it is the only model with confirmed ONVIF compliance in the provided specs. It also specifies a 4.3mm fixed focal length and Super Low Lux minimum illumination, giving installers concrete design parameters — data absent from the TBL8804-0010 spec sheet. Both cameras share the same 8MP resolution and WDR Pro capability, so imaging parity is the baseline. However, the TBL8710-000's spec set is materially more complete: it adds pixel resolution (3840×2160), mount type (Wall/Soffit), and VMS protocol details. For either model, critical installation parameters — IP rating, operating temperature, PoE class, IR range, and dimensions — are not present in the supplied data and must be verified against the full datasheets before specifying either camera for a project.
Is the TBL8710-000 or TBL8804-0010 better for low light?
Based on the provided specs, only the TBL8710-000 carries a low-light characterization ('Super Low Lux'). The TBL8804-0010 provides no minimum illumination figure, so a direct numerical comparison is not possible. Consult the full datasheets for lux ratings before specifying either camera for low-light applications.
Will either camera work with my third-party VMS?
The TBL8710-000 explicitly lists ONVIF and RTSP compatibility, confirming it will work with any ONVIF-compliant VMS. The TBL8804-0010's provided specs do not include an ONVIF field, so compatibility with third-party VMS platforms cannot be confirmed from the available data alone.
Are these two cameras the same resolution?
Both are listed as 8MP. The TBL8710-000 specifies 3840×2160 (4K UHD). The TBL8804-0010 is listed as 8MP but no pixel-dimension breakdown is provided in its spec data. Verify the sensor resolution in the TBL8804-0010 full datasheet if exact pixel count matters for your application.
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.