Geovision FD34100-001U vs Geovision VD321-D01U: Specification Comparison
Both the Geovision FD34100-001U and VD321-D01U are 3MP fixed dome IP cameras from the same manufacturer, making them genuine cross-shop candidates for installers weighing deployment environment against imaging flexibility. The FD34100-001U is a motorized-lens IR fixed dome aimed at interior applications such as lobbies, while the VD321-D01U is a vandal-proof dome rated for high-security and harsher environments. This comparison draws exclusively from the provided specifications for each model.
In This Guide
How do the imaging specs compare?
Both cameras share a 3MP resolution, and both provide built-in IR for low-light and night-vision capture. The FD34100-001U distinguishes itself with a 3–9 mm motorized lens, enabling post-installation zoom and focus adjustment without physically swapping optics or re-aiming the camera head — a meaningful advantage in lobbies or entrance corridors where coverage zones may need refinement after mounting. It also carries a WDR Pro designation, indicating an advanced wide dynamic range implementation intended to preserve detail in mixed-light scenes.
The VD321-D01U's lens specification is not provided in the supplied data, so a direct focal-length comparison cannot be made. Its IR capability is confirmed as built-in IR, consistent with the FD34100-001U, but no IR range distance or minimum illumination figure is listed for either model. WDR is not cited for the VD321-D01U. Buyers requiring a specific lens focal length or confirmed WDR on the VD321-D01U should consult the manufacturer datasheet.
What about installation and environment?
The VD321-D01U carries explicit IP66 weatherproofing and IK10 (and IK10+) impact resistance ratings, qualifying it for outdoor-capable washdown environments and locations subject to deliberate physical attack — a specification set the FD34100-001U does not have in the provided data. The FD34100-001U lists no IP or IK rating, indicating it is positioned for controlled interior environments such as lobbies and reception areas rather than exposed or high-abuse locations.
Both cameras support PoE power and ceiling/wall mounting in a dome form factor. The FD34100-001U additionally lists DC12V and AC24V power compatibility per its bullet points, offering more flexibility in legacy or mixed electrical infrastructure. The VD321-D01U's power input is listed solely as PoE. Operating temperature range, dimensions, and weight are absent from the provided specifications for both models.
Which fits your VMS and analytics better?
Both cameras declare ONVIF compliance, ensuring baseline interoperability with any ONVIF-conformant VMS or NVR platform without proprietary driver dependencies. The FD34100-001U is categorized under MPCam cable category while the VD321-D01U falls under IPCAM, reflecting internal catalog classification differences rather than functional connectivity distinctions — both connect via standard Ethernet/RJ-45 with PoE. Neither model's provided specifications include data on edge analytics, on-board SD card storage, audio input/output, or maximum frame rate, so no comparison on those dimensions is possible from the supplied data alone.
Which should you choose: the FD34100-001U or the VD321-D01U?
Our take: The FD34100-001U is the stronger choice when deployment is in a controlled interior environment — such as a lobby or entrance — where imaging flexibility and WDR performance are the primary requirements. Its 3–9 mm motorized lens allows post-installation coverage adjustment without rehardware, a concrete advantage the VD321-D01U's unspecified fixed lens cannot match, and its WDR Pro feature is not present in the VD321-D01U's provided specs. Conversely, the VD321-D01U is the correct selection wherever physical hardening is mandatory: its IP66 weather seal and IK10 impact rating make it the only option of the two confirmed suitable for outdoor-capable, washdown, or vandal-prone installations. Both share 3MP resolution and ONVIF compliance, so VMS integration is equivalent. Choose the FD34100-001U for flexible indoor imaging; choose the VD321-D01U for ruggedized, high-security, or partially exposed environments.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | Geovision FD34100-001U | Geovision VD321-D01U |
|---|---|---|
| Resolution | 3 MP | 3 MP |
| Camera Type | Motorized IR Fixed Dome | Vandal Proof Dome |
| Lens / Focal Length | 3–9 mm motorized | — |
| WDR | WDR Pro | — |
| IR / Low Light | IR | Built-in IR |
| IP Rating | — | IP66 |
| IK / Impact Rating | — | IK10 / IK10+ |
| Power Input | PoE; DC12V; AC24V | PoE |
| Connectivity | Ethernet | PoE (Ethernet) |
| Mount Type | Ceiling / Wall | Ceiling / Wall |
| Form Factor | Dome | Dome |
| ONVIF | Yes | Yes |
| Intended Environment | Lobby / Interior | High-Security |
Frequently Asked Questions
Which should you choose: the FD34100-001U or the VD321-D01U?
The FD34100-001U is the stronger choice when deployment is in a controlled interior environment — such as a lobby or entrance — where imaging flexibility and WDR performance are the primary requirements. Its 3–9 mm motorized lens allows post-installation coverage adjustment without rehardware, a concrete advantage the VD321-D01U's unspecified fixed lens cannot match, and its WDR Pro feature is not present in the VD321-D01U's provided specs. Conversely, the VD321-D01U is the correct selection wherever physical hardening is mandatory: its IP66 weather seal and IK10 impact rating make it the only option of the two confirmed suitable for outdoor-capable, washdown, or vandal-prone installations. Both share 3MP resolution and ONVIF compliance, so VMS integration is equivalent. Choose the FD34100-001U for flexible indoor imaging; choose the VD321-D01U for ruggedized, high-security, or partially exposed environments.
Is the FD34100-001U or VD321-D01U better for low light?
Both cameras include built-in IR for night-time imaging, so both provide 24/7 low-light coverage. However, only the FD34100-001U carries a WDR Pro specification, which helps preserve detail in scenes with simultaneous bright and dark zones (e.g., a sunlit entrance with a shadowed interior). Minimum illumination figures and IR range distances are not provided for either model in the available specs, so a quantitative low-light comparison cannot be made from the supplied data.
Can the VD321-D01U be used outdoors while the FD34100-001U cannot?
Based on the provided specifications, yes. The VD321-D01U carries an IP66 weather resistance rating and IK10 impact resistance, qualifying it for outdoor-capable and washdown environments. The FD34100-001U lists no IP or IK rating in its provided data, which positions it for indoor, controlled-environment use. Installers requiring outdoor or exposure-rated deployment should select the VD321-D01U.
Do both cameras work with third-party VMS platforms?
Yes. Both the FD34100-001U and VD321-D01U declare ONVIF compliance, which provides baseline interoperability with any ONVIF-conformant VMS or NVR regardless of manufacturer. Neither model's provided specifications list proprietary SDK or analytics platform requirements. For VMS-specific profile levels (Profile S, G, T), consult the manufacturer's ONVIF conformance documentation, as that detail is not present in the supplied specs.
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.