ACTi Z310 vs i-PRO X15700-V2L

CAMERA COMPARISON

ACTi Z310 vs i-PRO X15700-V2L: Specification Comparison

Both the ACTi Z310 and i-PRO WV-X15700-V2L are 8MP outdoor fixed bullet cameras targeting perimeter and general surveillance applications. The Z310 is a compact mini-bullet with a fixed wide-angle lens running on standard 802.3af PoE, while the X15700-V2L is a full-size 4K bullet with a motorized varifocal lens, on-board AI analytics, and PoE+ power. This comparison covers sensor, optics, environmental ratings, power, VMS integration, and analytics to help installers and IT buyers evaluate the right fit.



How do the imaging specs compare?

Both cameras deliver 8MP at 30 fps, but their sensor and optics differ substantially. The ACTi Z310 uses a 1/2.8" sensor with a fixed 2.8mm f/1.6 lens providing a 99° horizontal field of view at 1440p (2560×1440). The i-PRO WV-X15700-V2L uses a larger 1/1.8" CMOS sensor scanning at 7.68mm × 4.32mm and outputs true 4K (3840×2160). The larger sensor on the X15700-V2L captures more light per pixel, and its specified minimum illumination of 0.03 lux (B&W, F1.5) provides a concrete low-light benchmark; the Z310 spec sheet does not publish a minimum illumination figure.

For IR range, the i-PRO reaches 70m (230 ft) versus the Z310's IR distance, which is listed as present but no range in meters is specified in the provided data. The X15700-V2L's motorized varifocal lens covers 4.3–8.6mm (53°–104° H) with 2.0× optical zoom and up to 12× extra zoom at reduced resolution, enabling scene framing after installation. The Z310's fixed 2.8mm lens locks field of view at deployment. The X15700-V2L also publishes full DORI distances: Detection at 60m (wide) to 154m (tele), Recognition at 12m (wide) to 30.8m (tele). No DORI data is available for the Z310. The X15700-V2L additionally specifies Super Dynamic WDR at up to 132 dB; the Z310 lists WDR without a dB value.


What about installation and environment?

The i-PRO WV-X15700-V2L carries IP66/IP67, NEMA 4X, and IK10 impact ratings, with wind resistance specified at up to 40 m/s (~89 mph) and an operating temperature range of −40°C to +55°C (power-on from −30°C). The ACTi Z310 is rated IP67 and operates from 0°C to 50°C; no IK impact rating or wind resistance figure is published for the Z310. For harsh-environment or vandal-risk installs, the X15700-V2L's IK10 and broader temperature range provide a material advantage.

On power, the Z310 draws under 13W and runs on 802.3af PoE (Class 0–3 switches), making it compatible with virtually any PoE infrastructure. The X15700-V2L requires PoE+ (802.3at, Class 4, 14W) or a DC 12V 1.2A supply, so switch ports must support 802.3at. The Z310 supports wall, soffit, and pole mounting; the X15700-V2L supports ceiling and wall mounting with specified pan/tilt/yaw adjustment ranges (ceiling: ±180° pan, 0–100° tilt; wall: ±100° tilt, ±145° yaw). The X15700-V2L's aluminum die-cast housing with stainless steel finish adds mass (2.5 kg / 5.6 lbs) versus the Z310's mini-bullet form factor (weight not specified in provided specs).


Which fits your VMS and analytics better?

The ACTi Z310 is ONVIF Profile S/T compliant. The i-PRO WV-X15700-V2L supports ONVIF Profiles G, S, T, and M — adding Profile G for on-camera recording management and Profile M for metadata and analytics interoperability. Both cameras support H.265, H.264, and MJPEG compression. The X15700-V2L additionally specifies Smart Coding (variable GOP, frame rate control, Smart VIQS) for bandwidth optimization; no equivalent smart-coding spec is listed for the Z310. The X15700-V2L supports up to 14 simultaneous streams and IPv6; these figures are not published for the Z310.

On analytics, the X15700-V2L includes on-board AI analytics (motion, face, people, vehicle detection), AI sound classification (gunshot, yell, vehicle horn, glass break), scene change detection, video motion detection across 4 areas, fog compensation, built-in gyro image stabilization, and up to 8 privacy zones in 6 colors. The Z310 does not list edge analytics beyond ONVIF compliance. Audio also differs: the Z310 has a built-in microphone only; the X15700-V2L provides both a 3.5mm audio input and a 3.5mm audio output with half/full duplex modes, plus alarm I/O terminals (3× alarm in, 1× alarm out, 1× AUX out). Both cameras support microSD/SDXC edge storage; the X15700-V2L specifies up to 512GB capacity. The X15700-V2L carries a published 5-year warranty; no warranty term is specified in the Z310 provided specs.


Which should you choose: the Z310 or the X15700-V2L?

Our take: The WV-X15700-V2L is the stronger choice when the deployment demands forensic-grade imaging, extreme environmental tolerance, or on-board AI analytics. Its 1/1.8" sensor versus the Z310's 1/2.8" sensor delivers meaningfully more light-gathering area, it publishes a 0.03-lux minimum illumination where the Z310 lists none, and its IR range reaches 70m versus an unspecified distance for the Z310. Its IK10 impact rating and −40°C to +55°C operating range extend deployment options well beyond the Z310's 0°C to 50°C and unrated impact tolerance. For budget-sensitive or 802.3af-only switch infrastructure installs where a fixed wide-angle lens suffices, the Z310's sub-13W 802.3af draw and IP67 housing are practical advantages. Choose the X15700-V2L for high-consequence perimeter, parking, or forensic applications; the Z310 suits cost-controlled interior-to-covered-exterior installs with standard PoE infrastructure.


Side-by-Side Comparison

Spec-for-spec, from manufacturer data.

SpecificationACTi Z310i-PRO X15700-V2L
Resolution2560×1440 (8MP / 1440p)3840×2160 (8MP / 4K)
Image Sensor1/2.8" CMOSApprox. 1/1.8" CMOS (7.68mm × 4.32mm)
Lens / Focal Length2.8mm fixed, f/1.64.3–8.6mm motorized varifocal, f/1.5–f/2.4
Horizontal FOV99°53°–104°
Optical Zoom2.0× (up to 12× extra zoom at 640×360)
Minimum IlluminationNot specified0.03 lux (B&W, 50IRE, F1.5, 1/30s)
IR RangeNot specified70m (230 ft)
WDRWDR (dB not specified)Max. 132 dB (Super Dynamic On, Level 31)
Max Frame Rate30 fps @ 1440p30 fps @ 3840×2160
Video CompressionH.265, H.264, MJPEGH.265, H.264, MJPEG
IP RatingIP67IP66 / IP67 / NEMA 4X
IK / Impact RatingIK10 (IEC 62262)
Operating Temperature0°C to +50°C−40°C to +55°C (power-on from −30°C)
Power Input / PoE Class802.3af PoE, < 13WPoE+ 802.3at Class 4, 14W; or DC 12V 1.2A
ONVIF ProfilesProfile S, TProfile G, S, T, M
Edge AnalyticsAI motion, face, people, vehicle detection; AI sound classification
AudioBuilt-in microphone3.5mm audio input + 3.5mm audio output; half/full duplex
Alarm I/O3× Alarm IN, 1× Alarm OUT, 1× AUX OUT
Edge StoragemicroSDHC / microSDXC (capacity not specified)microSD / microSDHC / microSDXC up to 512GB
Image StabilizationBuilt-in gyro (30fps only)
WarrantyNot specified5-Year Warranty
WeightNot specifiedApprox. 2.5 kg (5.6 lbs)

Frequently Asked Questions

Which should you choose: the Z310 or the X15700-V2L?

The WV-X15700-V2L is the stronger choice when the deployment demands forensic-grade imaging, extreme environmental tolerance, or on-board AI analytics. Its 1/1.8" sensor versus the Z310's 1/2.8" sensor delivers meaningfully more light-gathering area, it publishes a 0.03-lux minimum illumination where the Z310 lists none, and its IR range reaches 70m versus an unspecified distance for the Z310. Its IK10 impact rating and −40°C to +55°C operating range extend deployment options well beyond the Z310's 0°C to 50°C and unrated impact tolerance. For budget-sensitive or 802.3af-only switch infrastructure installs where a fixed wide-angle lens suffices, the Z310's sub-13W 802.3af draw and IP67 housing are practical advantages. Choose the X15700-V2L for high-consequence perimeter, parking, or forensic applications; the Z310 suits cost-controlled interior-to-covered-exterior installs with standard PoE infrastructure.

Is the ACTi Z310 or i-PRO WV-X15700-V2L better for low-light performance?

Based on the provided specs, only the i-PRO WV-X15700-V2L publishes a minimum illumination figure: 0.03 lux (B&W, F1.5, 1/30s). The ACTi Z310 does not specify a minimum illumination value, so a direct lux comparison cannot be made. The X15700-V2L also has a larger 1/1.8" sensor (versus the Z310's 1/2.8") and an IR range of 70m; the Z310's IR range is not stated in the provided specs.

Can I install the WV-X15700-V2L on a standard 802.3af PoE switch?

No. The i-PRO WV-X15700-V2L requires PoE+ (802.3at, Class 4) at 14W, or a DC 12V 1.2A supply. Standard 802.3af switches are limited to 15.4W delivered but typically only guarantee ~12.95W at the device — the X15700-V2L's PoE+ designation means you need 802.3at-capable ports. The ACTi Z310, drawing under 13W, is compatible with standard 802.3af infrastructure.

Which camera is better suited for vandal-prone or extreme-weather outdoor sites?

The i-PRO WV-X15700-V2L is the spec-supported choice: it carries an IK10 impact rating (per IEC 62262), IP66/IP67 and NEMA 4X ingress protection, wind resistance up to 40 m/s (~89 mph), and an operating range of −40°C to +55°C. The ACTi Z310 is rated IP67 but does not publish an IK impact rating, wind resistance figure, or a temperature range below 0°C in the provided specifications.



Get a Second Opinion on Your Camera Choice

Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.