Comelit UT9174 Surface-Mounted Wall Housing
Overview
The Comelit UT9174 is a surface-mounted wall housing engineered to provide secure, standardized mounting for 4MP camera systems in commercial and institutional environments. This enclosure simplifies installation workflows for security integrators by offering a proven form factor that accommodates connected surveillance equipment without requiring custom fabrication or adapters. The UT9174 integrates with PoE+ (802.3at) powered networks, meaning your connected camera equipment draws power directly from your network switch—no separate power infrastructure required.
Key Features
- 4MP Camera Support: Designed specifically for 4MP sensor systems, the UT9174 ensures dimensional compatibility and proper thermal management for this resolution class—important because undersized housings can create heat pockets that degrade camera performance over time, particularly in summer deployments or spaces with limited air circulation.
- PoE+ Power Delivery (802.3at): Integrated power support eliminates the need for separate 12VDC supplies or AC drops at camera locations. A single Ethernet run delivers both signal and power, reducing installation labor and point-of-failure risk compared to dual-infrastructure deployments.
- Surface-Mount Design: Wall-surface installation (rather than flush-mount or recessed) makes the UT9174 faster to install on existing structures—no cutting into drywall or metal studs. Retrofit projects move faster, and future removal or relocation requires minimal patching.
- Indoor/Standard Environments: This housing is rated for indoor and non-extreme deployments (warehouses, offices, retail, educational facilities). If you need outdoor, wet, or hazardous-area performance, you'll need a weatherproof or certified enclosure variant instead.
- Comelit IP Camera Ecosystem Compatibility: The UT9174 integrates with Comelit's broader surveillance product line, simplifying procurement and support workflows when building out multi-camera systems under a single vendor platform.
- Standardized Mounting Template: Pre-engineered hole patterns and template guides reduce installation variance and field measurement errors—relevant because misaligned mounts can expose fastener holes and compromise seal integrity over time.
Integration & Compatibility
The UT9174 pairs with PoE+ network infrastructure, so verify that your switch or injector supports 802.3at power delivery at the camera's rated wattage. In multi-camera deployments, calculate total power draw across all devices to avoid overloading your switch's power budget. The housing is compatible with standard network video management systems (VMS) that support ONVIF or Comelit's proprietary protocols; confirm your recording platform before procurement if you have specific integration requirements. For surveillance storage planning, a 4MP camera recording 24/7 generates roughly 100–200 GB/day depending on compression and frame rate—factor this into your NVR or cloud retention strategy.
When to Choose a Different Model
If your deployment requires outdoor exposure, direct rainfall, dust ingress, or temperature extremes beyond typical indoor ranges (below 0°C or above 40°C), look for a weatherproof or explosion-proof variant in the Comelit catalog. If you need flush-in-wall mounting or compact form factors for aesthetic reasons, explore recessed or mini-dome housings. If your camera system operates at resolutions below 4MP or exceeds 4MP (5MP, 8MP), confirm the UT9174's compatibility before ordering—oversized or undersized enclosures can create optical dead zones or allow internal reflections that degrade image quality.
Frequently Asked Questions
Q: Is the UT9174 suitable for outdoor use?
A: No. The UT9174 is designed for indoor and standard indoor environments. For outdoor deployments, rain-exposed eaves, or direct sunlight, select a weatherproof enclosure with appropriate IP and IK ratings.
Q: What PoE power budget does the UT9174 require?
A: The UT9174 supports PoE+ (802.3at) delivery. Verify your switch provides sufficient power headroom for the connected camera's wattage; typical 4MP cameras draw 8–15W depending on lens and IR capability.
Q: Can the UT9174 be recessed or flush-mounted?
A: No. The UT9174 is a surface-mount-only design. If you require in-wall or flush installation, contact Comelit to explore recessed housing variants.
Q: Is installation hardware included?
A: Check the product datasheet for exact contents. Standard surface-mount housings typically include wall anchors and fasteners; confirm before ordering if you need specialized hardware for your wall substrate (concrete, tile, metal stud).
Q: Does the UT9174 work with non-Comelit cameras?
A: The UT9174 is a passive enclosure designed for 4MP camera systems. If the third-party camera's form factor and mounting footprint match Comelit's standard, physical compatibility is possible; however, confirm thermal clearance and connector positioning before field deployment.
Q: What temperature range is the UT9174 rated for?
A: Refer to the manufacturer datasheet for operating and storage temperature limits. Indoor standard-environment housings typically support 0°C to 40°C; confirm this meets your facility's HVAC profile before purchase.
Ted PerryPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The Comelit UT9174 is a straightforward surface-mount enclosure for 4MP camera systems, and that simplicity is its strength. Unlike modular or compact housings that force integration workarounds, the UT9174 gives you a standard form factor that integrators know and installers can execute cleanly. PoE+ support means one cable run per camera—no hunting for 12VDC supplies or designing separate power circuits.
Technical Highlights:
- PoE+ (802.3at) Integration: Delivers power and signal over a single Ethernet run, eliminating dual-infrastructure complexity and reducing installation labor by 20–30% compared to separate power deployments.
- 4MP Sensor Class Optimization: Dimensional and thermal engineering matched to 4MP resolution, ensuring proper airflow and connector spacing—critical because undersized housings can trap heat and shorten camera lifespan in warm environments.
- Surface-Mount Form Factor: No drywall cutting, no structural penetration. Retrofit work moves fast, and future removal requires only patch-and-paint, not HVAC or framing repair.
Deployment Considerations:
- Indoor/standard-environment rating only—skip this for outdoor, wet-location, or hazardous-area projects. Budget for a weatherproof variant instead if your facility profile changes.
- Power budget is a real constraint: verify your PoE+ switch has headroom for all connected cameras. A single overloaded switch port cascades into brownout across multiple cameras, degrading frame rate and causing motion-detection false negatives.
- Confirm 4MP form-factor fit before ordering. A camera rated for 4MP but physically designed for 5MP sensors may not mount cleanly, leaving gaps that expose connectors and invite dust ingress.
Deploy the UT9174 in retail, warehouse, office, or institutional indoor environments where you need reliable surface-mount infrastructure without custom fabrication overhead. For field teams and integrators building out multi-site deployments, the standardized template and PoE support make this a no-nonsense choice.
