Comelit UT9171 Surface-Mounted Wall Housing for Ultra Series
Overview
The Comelit UT9171 is a surface-mounted wall housing engineered for single-unit installation of Comelit Ultra series devices. This accessory provides a dedicated mounting enclosure that simplifies wall-based deployment in indoor environments. The UT9171 supports PoE+ (802.3at) power delivery, which means you eliminate the need for separate electrical runs — a meaningful simplification on retrofit installations where running new power drops is expensive or impractical.
Key Features
- PoE+ Power Support (802.3at): Draws power via standard 802.3at PoE+, eliminating dedicated 12VDC or AC infrastructure. On a managed switch with adequate power budgeting, one PoE+ port handles both data and power — reduces cabling complexity and labor cost, especially in multi-camera jobs.
- 4MP Resolution Compatibility: Engineered for Comelit Ultra units operating at 4MP (2688 × 1520 or equivalent). At this resolution, you capture detail sufficient for facial recognition at 8–12 feet and vehicle plate reading at 15–20 feet — the practical sweet spot for retail, office, and small-facility surveillance without storage bloat.
- Surface-Mount Form Factor: Wall-mounted installation (not flush or recessed). The external housing protects the device from casual contact and minor bumps, though it offers no weatherproofing — this is strictly an indoor housing.
- Comelit Ultra Series Compatibility: Specifically designed for the Comelit Ultra line. Before purchasing, confirm your target device is listed in the Ultra catalog — cross-compatibility with other Comelit series is not guaranteed without manufacturer verification.
- Single-Unit Capacity: Houses one Ultra device only. If you need to mount multiple units on the same wall, you will need multiple UT9171 housings or consider a larger multi-device enclosure from the Comelit accessory line.
- Installation Simplicity: Designed for standard security integrator wall mounting practices. Mounting template and fasteners are provided — no custom drilling or special tools required beyond a basic drill and stud finder.
Integration & Compatibility
The UT9171 integrates with any wall-mount camera housing workflow and works alongside standard PoE+ switches (48V, 802.3at certified). Ensure your network switch has sufficient power budget: a single PoE+ port supplies up to 30W, and the Comelit Ultra typically draws well under that ceiling. For multi-camera deployments, use a managed PoE+ switch with per-port power monitoring to avoid oversubscription.
This housing does not include video management software (VMS) or any analytics — it is purely a mounting and power-delivery enclosure. Your VMS and camera configuration happen independently after the UT9171 is mounted and the device is provisioned on the network.
When to Choose a Different Model
If you need outdoor weatherproofing (rain, dust, temperature extremes), the UT9171 is not suitable — look for an IP66-rated or higher housing in the Comelit accessory range. If you require multiple devices in one enclosure or a larger footprint for retrofit cable management, a multi-slot housing or electrical backbox adapter may be more efficient. For ceiling installations, a pendant mount or yoke assembly is a better choice than wall-surface mounting.
Deployment Scenarios
The UT9171 works well for indoor lobbies, offices, retail counters, and small warehouse aisles where a wall-mounted camera with PoE+ power is the baseline. The single-unit design keeps cost low and installation footprint minimal — useful when you are adding coverage to an existing office or retail space without major infrastructure upgrades. Pair it with a network video recorder or cloud storage backend to handle retention and analytics.
Ted PerryPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The Comelit UT9171 is a straightforward surface-mount enclosure — no surprises, no tricks. What you get is a wall housing that accepts a single Ultra device and delivers PoE+ power without extra electrical work. The UT9171 fits the retrofit retrofit playbook well: you have an existing wall, you want a camera there, and running a separate power circuit is not feasible.
Technical Highlights:
- PoE+ (802.3at) Power: 30W maximum available per port on a compliant switch. The Comelit Ultra draws a fraction of that, so power budgeting is straightforward on any modern managed PoE+ switch.
- 4MP Native Support: The housing is validated for 4MP Comelit Ultra units. At this pixel density, you are capturing enough detail for identification and forensic review without running into storage or codec overhead.
- Single-Unit Design: This is a one-camera housing. If you are building a 4- or 8-camera system, you will specify four or eight UT9171 units — it adds cost and complexity versus a larger multi-slot enclosure, so plan accordingly in labor estimates.
Deployment Considerations:
- Indoor-Only Thermal: No IP rating. Summer heat, winter cold, humidity, rain — none of it is managed by the housing. If your wall faces weather or condensation is a concern, move to an environmental enclosure.
- Cable Routing: Confirm your wall run has adequate space for PoE+ RJ-45 and any accessory connectors (USB, alarm I/O, etc.) before you commit to the surface mount. Tight wire chases can force retrofit rework.
- Comelit Ecosystem Dependency: The UT9171 is engineered for Comelit Ultra exclusively. Do not assume it works with Comelit Skyline, HiWatch, or other Comelit sub-brands without explicit cross-compatibility confirmation from Comelit technical support.
Deploy the UT9171 when you have a clean indoor wall, a stable local power budget (PoE+), and a need to install a single Comelit Ultra camera without electrical renovation. It is a no-frills solution that solves a specific problem — do not expect it to stretch beyond that scope.
Frequently Asked Questions
Q: Is the Comelit UT9171 weatherproof?
A: No. The UT9171 is rated for indoor use only. It offers no IP rating, so direct rain, snow, or prolonged moisture exposure will damage the housing and the internal device. For outdoor installations, consult the Comelit weatherproof housing line.
Q: How much power does the UT9171 draw from PoE+?
A: The housing itself draws no power. The Comelit Ultra device mounted inside draws power via the PoE+ cable (802.3at, up to 30W available). Typical Comelit Ultra power consumption is well under 15W, leaving headroom on a standard PoE+ port.
Q: Can I install multiple Comelit Ultra units in one UT9171?
A: No. The UT9171 is designed for single-unit mounting only. Multiple devices require multiple UT9171 housings or a larger multi-slot enclosure from the Comelit accessory catalog.
Q: Does the UT9171 work with all Comelit series cameras?
A: The UT9171 is engineered specifically for Comelit Ultra series devices. Cross-compatibility with other Comelit product lines (Skyline, HiWatch, etc.) is not guaranteed. Verify compatibility with the Comelit Ultra datasheet or contact the manufacturer before ordering.
Q: What mounting hardware is included with the UT9171?
A: The UT9171 ships with standard wall-mount fasteners and a mounting template. Exact contents are documented in the product datasheet; refer to the manufacturer PDF for a complete parts list.
Q: Can I ceiling-mount the Comelit UT9171?
A: The UT9171 is designed as a wall-mount housing. Ceiling installation may be possible with custom brackets, but it is not the intended use case. For ceiling-mounted Ultra devices, consult Comelit's pendant or yoke mounting options.
