Code Blue

Code Blue · 40237

Code Blue 40237 OCM Top Mount TOR CC

N expansion module designed for top-mount integration in surveillance system architectures

• Designed as a direct replacement OCM top-mount component for Code Blue systems.
• Operates on 24V DC, aligning with standard professional security installation power.
• Top-mount orientation supports clean integration into existing Code Blue OCM deployments.

Code Blue · 41033

Code Blue 41033 Equipment Ring MBZ 5in. w/Post

Mechanical mounting accessory designed to secure and organize paging amplifiers and audio distribution equipment in commercial security and

• 5-inch ring with integrated post eliminates separate brackets, cutting assembly time.
• Direct fit for Code Blue 12–24V DC paging amplifiers; no adapters required.
• Passive metal construction handles repeated mount cycles without deformation or fatigue.

Code Blue · 41153

Code Blue 41153 Equipment Ring MBZ 5.25in.

5.25-inch equipment ring designed to provide secure mechanical alignment and mounting support for paging amplifiers and audio security components in

• 5.25-inch ring form factor aligns with Code Blue paging amplifier mounting footprints.
• Supports 12–24V DC systems, fitting single-rail audio and emergency notification installs.
• Direct replacement part enables field repair without full amplifier removal or downtime.

Code Blue · 40229

Code Blue 40229 OCM Top Mount MBL CC

• Operates on 12–24V DC, adapting to existing power infrastructure without added supplies.
• Direct replacement for CB1, CB2, CB4, CB5, CB6, CB9, and CBRT series enclosures.
• Top-mount form factor installs using original fastening points for minimal retrofit work.

Code Blue · 41412

Code Blue 41412 HID Lens CB2-s

Replacement HID lens assembly designed for CB2-s thermal imaging systems used in security and surveillance deployments

• Direct OEM fit for CB2-s thermal cameras; no recalibration required after swap.
• Serial interface ensures stable frame sync with host CB2-s without protocol overhead.
• Component-level lens replacement restores factory thermal sensitivity and contrast.

Code Blue · 40619

Code Blue 40619 OCM Side Mount CRD

Side mount bracket designed to facilitate the installation of Code Blue paging amplifiers

• Side-mount bracket secures OCM series cameras in lateral positioning for tight spaces.
• Supports 12–24V DC operation, compatible with standard OCM series power supplies.
• Functions as a direct replacement mount, simplifying spares management on existing installs.

Code Blue · 40924

Code Blue 40924 WM-180 DBZ IA4100 Strobe

WM-180 DBZ IA4100 strobe unit designed for security and paging system integration in commercial and industrial environments

• Operates at 24V DC, sharing power with existing Code Blue paging infrastructure.
• Visual strobe flash ensures alerts reach occupants in high-noise industrial environments.
• Compatible with CB1/CB2/CB4/CB5/CB6/CB9 towers and LS1000/LS2000 paging systems.

Code Blue · 40610

Code Blue 40610 OCM Side Mount SRD

• OCM side-mount module for Code Blue emergency communication towers
• 12-24V DC operation drops onto Code Blue paging amplifier power buses
• Side-mount configuration for SRD-equipped CB tower deployments

Code Blue · 41105

Code Blue 41105 Heater AED

Thermal management accessory designed to maintain automated external defibrillator (AED) performance in cold environments where ambient temperatures

• Serial interface connects directly to compatible Code Blue AED units with no adapters required.
• Maintains AED battery and electronics above minimum thresholds in sub-freezing environments.
• Low continuous power draw supports 24/7 cold-storage deployment without straining facility circuits.

Code Blue · 40442

Code Blue 40442 WM-180 TOR No Control Strobe

Dedicated strobe notification module designed for security and emergency life-safety systems requiring synchronized visual alerting without

• Operates on 12–24V DC, fitting standard security supplies and UPS-backed panels.
• No-control strobe syncs flash output to the host panel, cutting wiring and config errors.
• Direct drop-in replacement for legacy WM-180 strobes in existing Code Blue paging chains.

Code Blue · 40910

Code Blue 40910 WM-180 GBK Strobe Warning Module

Strobe warning module designed for security and emergency alerting applications

• Operates on 12–24V DC, integrating directly with existing paging amplifier power rails.
• Activation is relay/logic-driven with no manual control, simplifying multi-zone installations.
• Parallel connectivity and drop-in harness compatibility enable fast swap-out or system expansion.

Code Blue · 41184

Code Blue 41184 OCM 8in. Pipe Extension SBL

Replacement pipe extension designed for OCM (Open Channel Mounted) security paging amplifier systems

• 8-inch extension spaces OCM amplifier assemblies without additional hardware or fabrication.
• Direct SBL bracket fit enables drop-in replacement on legacy OCM systems with no adapters.
• Rated for 12–24V DC, matching standard security paging amplifier voltage requirements.

Code Blue · 40188

Code Blue 40188 CB 5 OCM Cover Plate Center Hole

Replacement cover plate with center hole for CB 5-series OCM (Output Control Module) mounting assemblies

• Direct replacement cover plate maintains full compatibility with CB 5-series OCM assemblies.
• Center aperture supports clean cable routing and unobstructed connector access during install.
• Protects and secures the CB 5-series OCM module housing when servicing paging control equipment.

Code Blue · 40657

Code Blue 40657 Paint/Clear Coat Access 4-u

Replacement access panel component designed for multi-unit door control and access management systems

• Supports up to 4 independent access points or tenant call stations in one panel.
• Operates on 12–24V DC, fitting both modern access-control and legacy paging infrastructure.
• Drop-in replacement for existing Code Blue panels; no re-termination of in-wall wiring needed.

Code Blue · 40150

Code Blue 40150 OCM Top Mount CRD

Replacement card reader assembly (CRD) designed for integration with Code Blue paging amplifier systems operating on 12-24V DC power supplies

• Drop-in top-mount fit eliminates field rewiring when replacing aged card reader assemblies.
• Operates on 12–24V DC rails, compatible with standard institutional emergency comm systems.
• Parallel OCM interface preserves signal integrity without amplifier reprogramming or recalibration.

Code Blue · 41160

Code Blue 41160 Equipment Ring TOR 5.25in.

Mechanical mounting accessory designed to secure and position equipment within audio amplification and security system installations

• 5.25-inch ring ensures repeatable, drift-free alignment across rack and wall mounts.
• Supports 12V and 24V DC systems, eliminating additional voltage regulation hardware.
• Standardized fitment simplifies parts inventory and swap-outs across multi-site deployments.

Code Blue · 40425

Code Blue WM-180 Midnight Blue No Cntrl - 40425

Wall-mount enclosure designed to house and protect Code Blue CB series speakerphone units in outdoor, semi-outdoor, and harsh-environment

• Weatherproof enclosure shields CB1/CB2/CB4/CB5/CB6/CB9 units from rain, dust, and UV.
• Wall, pole, and recessed mounting options simplify retrofits across mixed-deployment sites.
• Midnight blue finish integrates cleanly with parking structures and standard building facades.

Code Blue · 40499

Code Blue 40499 WM-180 Dark Bronze IA4100

Wall-mount bracket designed for the IA4100 series paging amplifier, providing secure mechanical support in both new-build and retrofit installations

• Direct mechanical fit for all IA4100 amplifier models — no adapter plates required.
• Supports 12–24V DC input, eliminating dedicated power-supply sourcing on low-voltage runs.
• Dark bronze finish integrates with commercial hardware in office, retail, and hospitality sites.

Code Blue · 41039

Code Blue 41039 Equipment Ring TOR 5in. w/Post

Mounting accessory designed for secure equipment positioning and cable management in surveillance and access control system deployments

• 5-inch ring diameter provides a direct-fit anchor for Code Blue pole-mounted deployments.
• Integrated rigid post resists lateral movement and vibration, maintaining equipment alignment.
• Ring geometry organizes power, audio, and data cables to reduce strain and aid serviceability.

Code Blue · 40142

Code Blue 40142 Overhead Camera Mount

Silver-finished overhead camera mount designed for ceiling installations

• Ceiling-mount design delivers overhead sightlines across floors, lobbies, and aisles.
• Engineered exclusively for Code Blue CB 1 Series cameras—verify model before ordering.
• Requires secure attachment to load-bearing ceiling substrate; not for unreinforced drop tile.