Middle Atlantic CBL LDR END DRP 8 1PC 3 - CLH-ED8

Middle Atlantic CLH-ED8 Cable Ladder End Drop

Overview

The Middle Atlantic CLH-ED8 is a cable ladder end drop component designed to terminate a horizontal cable management run and transition cables vertically downward into a rack or enclosure. At 7.5 inches wide, 6.1 inches tall, and 4.5 inches deep, it provides a clean, controlled descent path for cable bundles at the end of a ladder run — keeping infrastructure tidy and strain-free without improvised bends or zip-tie workarounds. If you're building out a structured cabling backbone for a Middle Atlantic ladder system in a data center aisle, server room, or large AV/security head-end, this is the termination piece that completes the run properly. The CLH-ED8 (often searched as CLH ED8) ships as a single unit and is TAA compliant, making it viable for government and federally funded projects where domestic sourcing requirements apply.

Key Features

• TAA Compliant: Meets Trade Agreements Act requirements — a hard requirement for federal, state, and education projects that enforce domestic sourcing rules. If procurement requires TAA, this piece qualifies.
• Compact 7.5" Width: Sized to match standard cable ladder widths, so it integrates flush with the horizontal run without creating a bottleneck or requiring adapters. Cables don't bunch up at the transition point.
• 6.1" Drop Height: Provides enough vertical travel (15.5 cm) to redirect cables cleanly from the overhead ladder plane into a rack's cable entry point — enough clearance to maintain minimum bend radius on Cat6, fiber, or low-voltage cabling.
• 4.5" Depth: The shallow 4.5-inch footprint means this end drop fits in constrained overhead spaces or against walls without protruding into walkways or conflicting with adjacent equipment.
• Single-Piece Construction (1 PC): Ships as one assembled unit — no sub-components to lose or assemble on a ladder. Speeds up installation in overhead runs where handling multiple parts is awkward.
• Lightweight at 1.8 lbs: Low shipping weight simplifies overhead installation; one technician can position and fasten without a second set of hands just to hold the piece in place.

Integration & Compatibility

The CLH-ED8 is part of Middle Atlantic's cable ladder system and is designed to work with their CLH-series horizontal ladder runs. Before ordering, confirm your horizontal ladder width matches the 7.5-inch profile of this end drop. For overhead-to-rack transitions in security head-ends, a rack enclosure with a top cable entry panel directly below the drop point gives the cleanest result. Verify the drop height aligns with your rack's cable entry height — the 6.1-inch vertical span is fixed, so plan the ladder mounting height accordingly.

What's in the Box

• 1x Middle Atlantic CLH-ED8 Cable Ladder End Drop

Frequently Asked Questions

Q: Is the CLH-ED8 TAA compliant?

A: Yes. The CLH-ED8 is TAA compliant, making it suitable for federal, state, and government-funded projects with domestic sourcing requirements.

Q: What are the dimensions of the CLH-ED8?

A: The CLH-ED8 measures 7.5 inches wide, 6.1 inches tall, and 4.5 inches deep (19.1 cm x 15.5 cm x 11.4 cm). Shipping weight is 1.8 lbs.

Q: How many pieces are included with the CLH-ED8?

A: The CLH-ED8 ships as a single unit — one end drop piece per package.

Q: What cable ladder series does the CLH-ED8 work with?

A: The CLH-ED8 is part of Middle Atlantic's CLH cable ladder family. Match your horizontal ladder width to the 7.5-inch profile of this end drop before ordering.

Q: Can the CLH-ED8 be used in government or federally funded installations?

A: Yes. Its TAA compliance means it satisfies procurement requirements on federal and government projects where Trade Agreements Act compliance is mandated.

Jerry Tildsen

The CLH-ED8 is a purpose-built termination piece — the 6.1-inch drop height and 4.5-inch depth are the two numbers that determine whether this fits your install without modification. I've seen integrators order the wrong end drop because they measured the ladder width but not the overhead clearance; at 4.5 inches deep, this one works in tight ceiling spaces where deeper drops foul adjacent conduit or structural members.

Technical Highlights:

• 7.5" Width Match: Aligns with standard CLH-series ladder widths — no reducers or offset brackets needed, which means one less failure point in an overhead run.
• TAA Compliance: Verified TAA-compliant on this SKU, which unlocks it for GSA schedule and cooperative contract purchasing without a separate compliance review per project.
• 1.8 lb Shipping Weight: Light enough for single-tech overhead installation; in a long aisle with 20+ end drops, that weight reduction adds up when you're working off a ladder.

Deployment Considerations:

• Plan your ladder mounting height so the 6.1-inch fixed drop aligns with your rack's top cable entry — this dimension is not adjustable, and shimming an end drop looks like an afterthought.
• The CLH-ED8 is a single-piece unit, but confirm you have the correct CLH horizontal ladder series on hand before install day; mismatched ladder profiles won't seat cleanly at the end drop junction.

Best fit for government facilities, education campuses, or enterprise security head-ends where TAA compliance is a bid requirement and a clean overhead-to-rack cable transition is part of the as-built documentation.