Panduit UTP6AX7GY 10Gig Cat 6A UTP Patch Cord 7ft

Panduit UTP6AX7GY Cat 6A UTP Patch Cord

The Panduit UTP6AX7GY delivers 10GBASE-T performance in a 7-foot unshielded twisted pair patch cord engineered for enterprise networks, datacenters, and structured cabling installations where Cat 6A bandwidth meets tight routing constraints. Built on 24 AWG solid conductor construction with TX6A modular plugs, this gray U/UTP cord supports 10 Gb/s transmission across the full 100-meter channel while maintaining alien crosstalk margins that exceed ANSI/TIA-568.2-D Category 6A requirements. RapidID barcode integration and a tangle-free release latch address the two most common pain points in MACs: port mapping errors and snag-related downtime.

Key Features

• 24 AWG solid conductor U/UTP construction with 0.250-inch (6.4mm) diameter for tight-radius routing in high-density racks
• TX6A™ 10Gig modular plugs rated for 2,500 insertion cycles with IEEE 802.3af/at/bt Type 3 and Type 4 PoE support up to 100W
• Tangle-free latch design prevents snags on adjacent cables during moves, adds, and changes in congested pathways
• Pre-installed RapidID barcode enables port mapping and cable management via Panduit RapidID software without manual labeling
• Exceeds ANSI/TIA-568.2-D Category 6A and ISO 11801 Class EA alien crosstalk specifications across full frequency range to 500 MHz
• CM flammability rating qualifies for horizontal and intra-building backbone installations per NEC Article 800

Solid foil tape shielding at the plug interface limits alien crosstalk (ANEXT) coupling between adjacent cables in bundled pathways, a critical requirement when deploying 10GBASE-T in existing cable trays designed for Cat 5e densities. The 24 AWG solid conductor construction balances insertion loss (IL) and return loss (RL) across the 1–500 MHz operating range while maintaining the stiffness required for reliable plug-to-jack contact under vibration and thermal cycling. TX6A modular plugs feature a 50-microinch gold-plated contact finish and strain relief boot geometry that distributes bend stress across the cable jacket rather than concentrating it at the termination point, extending service life in equipment rooms where cables experience frequent handling during troubleshooting and reconfiguration. The 0.250-inch overall diameter enables tighter bend radii than shielded Cat 6A alternatives, reducing horizontal offset requirements in equipment racks and vertical cable managers where space between patch panels and active equipment is constrained.

In enterprise network deployments where switching infrastructure supports multi-gig uplinks (2.5G/5G/10G auto-negotiation), this patch cord provides the physical-layer headroom to sustain 10 Gb/s full duplex without performance degradation due to alien crosstalk or connector return loss. IEEE 802.3bt Type 4 PoE compatibility—validated across 2,500 insertion cycles—ensures reliable 100W power delivery to devices like PTZ cameras, Wi-Fi 6E access points, and LED lighting controllers without mid-span injector requirements. RapidID barcode integration eliminates the manual port documentation step during initial installation and subsequent MACs: scanning the barcode auto-populates port records in the RapidID cable management database, reducing mapping errors that lead to mislabeled ports and extended troubleshooting cycles. The gray jacket color aligns with TIA-606-C infrastructure labeling conventions for horizontal cabling serving workstations, access control panels, and IP endpoints in commercial buildings.

Compliance with ANSI/TIA-568.2-D Category 6A, ISO 11801 Class EA, IEC 60603-7, and ANSI/TIA-1096-A (formerly FCC Part 68) ensures interoperability across global markets and compatibility with standards-based testing equipment from Fluke Networks, VIAVI, and Ideal Networks. UL 1863 listing and RoHS material compliance satisfy procurement requirements for federal, healthcare, and education installations where third-party certification and environmental mandates govern product selection. For integrators managing 10Gig fiber-to-copper migration projects or high-density server room consolidations, the UTP6AX7GY provides a field-proven termination solution that balances performance, durability, and total cost of ownership across the expected 10–15 year infrastructure service life.