Panduit UTP6AX7BL 10Gig 7ft Cat 6A Patch Cord

Panduit UTP6AX7BL Cat 6A 10Gig Patch Cord

The Panduit TX6A™ 10Gig UTP6AX7BL delivers 10GBASE-T performance in a 7-foot unshielded patch cord engineered for high-density data center and enterprise ToR switching environments. Built on 24 AWG solid copper conductors with 0.250" (6.4mm) overall diameter, this Category 6A cable exceeds ANSI/TIA-568.2-D and ISO 11801 Class EA specifications across the full 1–500 MHz frequency range. The U/UTP construction relies on balanced pair geometry and internal foil tape to limit alien crosstalk (AXT) when bundled in cable managers or horizontal pathways, ensuring consistent 10 Gb/s throughput without the weight and bend-radius penalties of shielded alternatives. Panduit's tangle-free latch design eliminates the snag-and-break failures common to standard RJ45 boots, and factory-installed RapidID barcode labels enable one-scan port mapping for MAC address discovery and asset inventory.

Key Features

• 10 Gb/s Capable: Exceeds TIA-568.2-D Category 6A and ISO 11801 Class EA from 1 to 500 MHz for 10GBASE-T Ethernet
• PoE Power Delivery: Supports IEEE 802.3af (15.4W), 802.3at (30W), and 802.3bt Type 3 (60W) / Type 4 (100W) for high-power endpoints
• Solid Copper Conductors: 24 AWG solid bare copper for permanent-link performance and lower DC resistance
• Alien Crosstalk Mitigation: Internal foil tape and balanced pair design maintain margins in 6-around-1 bundle configurations
• Tangle-Free Latch: Snag-resistant boot with fast-release latch streamlines adds, moves, and changes in densely populated patch panels
• RapidID Asset Tracking: Pre-installed barcode labels for port mapping and MAC address discovery via Panduit RapidID software
• CM Rated: UL 1863 and CSA C22.2 listed for commercial in-building riser and horizontal installations
• Wiring Flexibility: Compatible with both T568A and T568B termination schemes

The 24 AWG solid conductor construction positions the UTP6AX7BL as a permanent-link patch cord rather than a stranded work-area cable—DC loop resistance stays below 9.38 Ω/100m (versus 12.5 Ω for stranded 26 AWG), reducing insertion loss and freeing up power budget for 802.3bt Type 4 deployments pushing 100W to PTZ cameras or 802.11ax access points. The 0.250" diameter threads through 1.5" horizontal-manager fingers and EIA-compliant vertical cable management without the stiffness of F/UTP or S/FTP shielded cords, and the reduced bend radius simplifies high-density 48-port switch deployments where every millimeter of slack matters. Installers running 10GBASE-T server-to-ToR links or NVR uplinks to aggregation switches will appreciate the alien-crosstalk headroom: Panduit's foil tape and tight pair-twist specifications maintain 3–6 dB of margin over the TIA Category 6A PSANEXT limit at 500 MHz, even when six cords share a single 4" D-ring pathway. That margin translates to fewer retransmissions, lower latency, and predictable throughput under load—critical when a single 10 Gb/s link aggregates traffic from sixteen PoE+ cameras or four NVMe-oF storage targets.

RapidID barcode integration distinguishes Panduit patch cords in enterprise and large-campus deployments where documentation drift creates hours of toning and tracing overhead during MAC address audits or VLAN migrations. Each cord ships with a machine-readable label encoding the cable type, length, and a unique serial number; scanning the label with Panduit's RapidID mobile app (iOS/Android) or handheld scanner instantly logs the port-to-device mapping into a CSV or cloud inventory system. This workflow cuts commissioning time by 40–60% compared to manual spreadsheet entry, and the barcode survives years of handling—printed on durable polyester stock rather than paper stickers that peel in humid IDF closets or basement data centers. The tangle-free latch uses a low-profile boot that extends only 0.5" beyond the plug body, eliminating the tall strain-relief towers that catch on adjacent cords during extraction. The latch itself is a spring-steel lever rather than a plastic cantilever, so it won't snap off after fifty insertion cycles—a common failure mode in contractor-grade patch cords. For integrators managing hundred-plus-port installations (security control rooms, hyperconverged clusters, media production switches), the latch design alone saves 10–15 seconds per connection during adds and moves, compounding across dozens of monthly service calls.

The UTP6AX7BL meets the full IEEE 802.3bt Type 4 power-delivery specification (100W over all four pairs), enabling single-cable installations for devices that previously required midspan injectors or AC adapters—examples include Axis Q6215-LE PTZ cameras (60W), Cisco Catalyst 9130 Wi-Fi 6E access points (90W), and Neat Board collaboration displays (65W). The solid-copper conductors hold DC loop resistance to 18.8 Ω for a 7-foot cord (versus 25 Ω for equivalent-length 26 AWG stranded), translating to 1.2–1.8W lower resistive loss and 2–3°C cooler operating temperature under sustained 100W load—important when forty-eight cords share a single enclosed vertical manager with minimal airflow. The cable's CM flammability rating covers horizontal and riser installations per NEC Article 800; for plenum spaces, specify Panduit's UTPSP6AX series (CMP-rated). Compliance extends to RoHS restrictions on lead and halogenated flame retardants, and the plug design meets IEC 60603-7 dimensional tolerances for interoperability with non-Panduit jacks—verified compatible with Leviton, CommScope, Siemon, and Belden Category 6A keystone and patch-panel terminations in third-party lab testing. The 10-pack carton quantity (UPC 61305677150) streamlines procurement for small-to-midsize projects; for 100+ cord deployments, Panduit offers factory-custom lengths and colors (consult factory lead times) to eliminate field-termination labor and ensure length-specific inventory control across multi-floor installations.