Panduit UTP6AX3OR 3-ft Cat 6A UTP Patch Cord

Panduit UTP6AX3OR Cat 6A UTP Patch Cord

The Panduit UTP6AX3OR is a 3-foot Cat 6A unshielded twisted pair patch cord engineered for 10GBASE-T Ethernet and high-power PoE++ applications in commercial security, datacenter, and structured cabling deployments. Built with 24 AWG solid conductors and a slim 0.250" diameter jacket, this orange TX6A™ 10Gig cord delivers certified 10 Gb/s performance while simplifying cable management in high-density rack and patch-panel environments. Factory-terminated with Panduit's high-performance modular plugs and equipped with RapidID pre-installed barcodes, the UTP6AX3OR streamlines port mapping and MAC layer documentation during initial installation and subsequent moves/adds/changes—eliminating manual labeling errors that plague large-scale network rollouts.

Key Features

• 10 Gigabit Ethernet Ready: Exceeds ANSI/TIA-568.2-D Category 6A and ISO 11801 Class EA specifications for reliable 10GBASE-T transmission up to 100 meters
• RapidID Port Mapping: Pre-installed barcode labels integrate with Panduit's RapidID software for automated port documentation, reducing commissioning time and eliminating hand-labeling errors
• Tangle-Free Latch Design: Low-profile snagless boot and ergonomic release mechanism prevent cable hangs during installation and simplify moves in congested patch fields
• Alien Crosstalk Mitigation: Internal solid foil tape shields against external interference in bundled cable runs, maintaining signal integrity in dense datacenter aisles and security equipment racks
• PoE++ Type 3 & Type 4 Certified: Rated for IEEE 802.3bt Class 6 and Class 8 power delivery up to 90W—supports PTZ cameras, high-power access points, LED lighting, and 802.3af/at devices
• 2500-Cycle Durability: Meets UL 1863 and IEC 60603-7 mechanical performance standards for 2500 mating cycles, outlasting consumer-grade cords in high-churn environments
• Slim 0.250" Jacket: Compact 6.4mm diameter improves airflow and simplifies routing in 1U patch panels and high-density fiber/copper crossovers
• CM Rated & RoHS Compliant: Meets NEC Article 800 commercial building requirements and European environmental directives for lead-free construction

The UTP6AX3OR's 24 AWG solid conductor construction delivers lower DC resistance than stranded equivalents, reducing insertion loss and improving link margin for 10GBASE-T applications—critical when pushing 100-meter channel limits in security control rooms or IDF-to-edge device runs. The unshielded twisted pair (U/UTP) design eliminates ground-loop concerns common with shielded cords in mixed-vendor installations, while the internal foil tape provides targeted alien crosstalk protection without the grounding complexity of F/UTP or S/FTP alternatives. Panduit's factory-terminated plugs feature gold-plated contacts and strain relief engineered for sub-1dB insertion loss at 500 MHz, ensuring compliance headroom for emerging applications beyond 10 Gb/s. The tangle-free latch uses a flexible polycarbonate boot that deflects rather than snags on adjacent cables—eliminating the "zip tie cuts" and bent release tabs that plague technicians working in live 42U racks.

RapidID integration addresses the documentation crisis in large-scale IP surveillance and access control deployments. Each cord ships with a scannable barcode that maps to MAC address and switch port during commissioning, feeding Panduit's RapidID software to auto-generate as-built documentation, port schedules, and O&M manuals. For integrators managing 200+ camera endpoints across multiple IDFs, this eliminates the manual spreadsheet/label-maker workflow and reduces post-install troubleshooting—when a camera drops offline six months later, the port map instantly identifies the switch port, VLAN assignment, and physical jack location. The 3-foot length is optimized for patch-panel-to-switch interconnects in standard 19" racks, providing enough slack for cable management arms and future re-patching without excess bundled loops that trap heat and complicate airflow. In security NOC environments running 48-port PoE switches with dense cable fills, the slim 0.250" jacket reduces bundle diameter by 20% versus standard Cat 6A cords, improving air circulation around switch ASICs and prolonging hardware life.

PoE++ Type 3 and Type 4 certification ensures safe power delivery up to 90W per port—sufficient for Axis Q62 PTZ cameras with IR/wiper loads, Hanwha multi-sensor arrays, and UniFi WiFi 6E access points under full transmit power. The cord meets IEEE 802.3bt Class 8 thermal and conductor resistance requirements, preventing voltage drop that can cause brownouts on high-power endpoints. For integrators deploying 802.3bt infrastructure, this eliminates the "PoE roulette" common with uncertified patch cords—no more random camera reboots or access points stuck in low-power mode due to resistive losses in substandard terminations. The UTP6AX3OR's 2500-cycle rating and ANSI/TIA-1096-A compliance (formerly FCC Part 68) guarantee mechanical reliability in high-churn environments like datacenter crossconnects and R&D labs where cords are re-patched weekly, while the CM flammability rating satisfies NEC 800.179 plenum-alternative requirements for horizontal cable runs in commercial spaces.