Panduit UTP6AX35YL Cat 6A UTP Patch Cord 35ft Yellow

Panduit UTP6AX35YL TX6A 10Gig Cat 6A UTP Patch Cord

The Panduit TX6A UTP6AX35YL delivers certified 10GBASE-T performance in a 35-foot yellow patch cord engineered for high-density datacenter and enterprise network environments. Built on 24 AWG solid copper conductors in a U/UTP (unshielded twisted pair) construction, this Cat 6A cord uses internal foil tape shielding to suppress alien crosstalk while maintaining the flexibility and termination simplicity of UTP cabling. Pre-installed RapidID barcodes enable instant asset tracking and port mapping when paired with Panduit's RapidID software, cutting documentation time during moves, adds, and changes. The tangle-free modular latch design prevents snags during installation and supports fast, one-handed release—critical when working in dense patch panel arrays or cable management trays.

Key Features

• Certified 10GBASE-T performance: exceeds ANSI/TIA-568.2-D Category 6A and ISO 11801 Class EA channel requirements for 10 Gb/s transmission over 100 meters
• 24 AWG solid copper conductors: provides lower DC resistance than stranded cable, ideal for longer patch runs and permanent-link installations
• Internal foil tape shielding: limits alien crosstalk between adjacent cables without the grounding complexity of fully shielded F/UTP or S/FTP systems
• RapidID asset tracking: pre-installed barcode labels integrate with RapidID software for automated port mapping, MAC-to-port association, and change audit trails
• Tangle-free latch: low-profile boot design prevents snags during cable pulls and supports one-handed disconnect in high-density environments
• PoE++ ready: rated for 2,500 mating cycles with IEEE 802.3af (PoE), 802.3at (PoE+), and 802.3bt Type 3/Type 4 (PoE++) power delivery—suitable for high-wattage access points, PTZ cameras, and LED lighting controllers
• CM-rated jacket: meets NEC Article 800 requirements for general-purpose horizontal and riser installations

Panduit's TX6A construction uses a 0.250-inch (6.4 mm) outer diameter jacket that balances flexibility with the performance headroom required for 10 Gb/s alien crosstalk margins. The solid foil tape layer wraps each twisted pair individually, creating a barrier against electromagnetic interference from adjacent cables—a critical design element in switch-to-server runs exceeding 100 active ports per rack. Unlike fully shielded solutions, the U/UTP architecture eliminates the need for grounded patch panels or drain-wire termination, simplifying field changes and reducing installer training requirements. The tangle-free latch uses a reinforced polycarbonate boot that deflects rather than catches on neighboring cables, a small detail that compounds into hours saved across large staging operations or emergency troubleshooting.

RapidID barcode integration shifts asset management from spreadsheet guesswork to scan-and-verify workflows. Each cord ships with a unique barcode label compatible with Panduit's RapidID mobile app and desktop software—enabling MAC address-to-port mapping, automatic documentation updates, and chain-of-custody tracking for compliance audits. In multi-tenant datacenter environments or enterprise networks with frequent VLAN changes, this traceability cuts troubleshooting time from hours to minutes and reduces configuration errors during after-hours maintenance windows. The 35-foot length suits cross-rack connections, wall-mount patch panel to floor-stand server runs, and perimeter switch uplinks where standard 7-foot cords fall short but 50-foot bulk cables create excess slack and airflow obstructions.

This cord meets ANSI/TIA-1096-A (formerly FCC Part 68) and IEC 60603-7 modular plug standards, ensuring plug-and-play compatibility with enterprise switches, servers, and structured cabling systems from any vendor. UL 1863 listing and RoHS compliance address procurement requirements for federal, healthcare, and education installations where third-party certification and hazardous-substance restrictions are non-negotiable. For spec-driven projects requiring documented headroom above TIA Cat 6A minimums, the TX6A line provides the test reports and compliance statements needed to close out inspections and warranty registrations without post-install remediation.