Panduit UTP6AX35GY Cat 6A UTP Patch Cord, 35 ft, Gray

The Panduit UTP6AX35GY delivers 10 Gig Ethernet performance in a 35-foot Cat 6A UTP patch cord engineered for high-bandwidth security installations. Built on Panduit's TX6A platform with 24 AWG solid conductors and a slim 0.250-inch diameter, this cord supports IP cameras running 4K streams, multi-gigabit PoE++ devices, and NVR uplinks where alien crosstalk and signal integrity matter. The tangle-free RJ45 latch prevents snags during dense rack builds, and factory-installed RapidID barcodes simplify documentation in multi-site deployments. Exceeds ANSI/TIA-568.2-D Category 6A and ISO 11801 Class EA with a 2500-cycle connector rating—built for integrators running permanent infrastructure, not temporary patch jobs.

Key Features

• 10GBASE-T Ready: Certified for 10 Gb/s Ethernet over the full 100-meter channel when paired with Cat 6A cabling; handles 4K camera streams, NVR backhaul, and switch uplinks without frame loss
• Alien Crosstalk Mitigation: U/UTP construction with solid foil tape shielding limits interference from adjacent cables in high-density bundles; maintains signal margins in crowded telecom rooms and IDF closets
• PoE++ Type 3 & Type 4 Compliant: Rated for IEEE 802.3bt up to 90W; powers PTZ cameras, multi-sensor arrays, and PoE-fed access controllers without voltage drop over 35 feet
• Tangle-Free Latch Design: Low-profile boot with flexible strain relief prevents hook-and-snag incidents during moves, adds, and changes; reduces rework time in live rack environments
• RapidID Port Mapping: Pre-installed barcodes integrate with Panduit's RapidID software for automated cable tracing, TIA-606-B labeling compliance, and as-built documentation in large enterprise rollouts
• 2500 Mating Cycles: Gold-plated modular plugs exceed TIA insertion/extraction durability spec by 250%; withstands frequent patching in test benches and temporary event networks

The 24 AWG solid copper conductors deliver lower DC resistance than stranded equivalents, reducing insertion loss and improving return loss across the 1–500 MHz spectrum. Panduit's TX6A plug geometry maintains 55 dB minimum alien NEXT at 500 MHz—critical when running six or more Cat 6A cables in parallel without metallic shielding. The CM flammability rating qualifies the cord for in-wall and plenum-adjacent runs per NEC Article 800, and the 0.250-inch jacket diameter fits standard cable managers without forcing bend-radius violations. For integrators spec'ing structured cabling to support 5MP+ cameras or 10 Gig storage networks, this cord ensures your physical layer won't bottleneck your bandwidth.

Deploy the UTP6AX35GY in scenario where you need a mid-length patch between distribution switches and VMS servers, between PoE injectors and high-wattage PTZ domes, or as tested fly leads for commissioning new horizontal cable runs. The gray jacket blends into neutral rack environments, and the solid-conductor design makes it ideal for semi-permanent installations where you won't be coiling and moving the cord daily. Because the RapidID barcode is molded into the boot, it survives the abrasion and UV exposure common in IDF environments—no peeling labels, no illegible handwriting. The cord ships in cartons of 10, letting you stock a consistent length for repeat installations without juggling mixed SKU inventories.

Exceeds ANSI/TIA-568.2-D Category 6A and ISO 11801 Class EA transmission requirements with verified headroom for 10GBASE-T operation. Meets ANSI/TIA-1096-A (formerly FCC Part 68) registration standards and IEC 60603-7 plug interface specs. UL 1863 listed and RoHS compliant. Rated for use with IEEE 802.3af (15.4W), 802.3at (30W), and 802.3bt Type 3 (60W) and Type 4 (90W) PoE, ensuring compatibility with current and future powered-device generations. For integrators who document their work and stand behind multi-year service contracts, the Panduit TX6A platform offers the mechanical durability, electrical margin, and traceability to reduce truck rolls and warranty claims.