Panduit UTP6AX10GY Cat 6A Patch Cord
The Panduit UTP6AX10GY delivers 10 Gb/s performance in a field-proven Cat 6A patch cord engineered for high-density enterprise networks and data center deployments. This 10-foot U/UTP cord combines 24 AWG solid copper construction with Panduit's tangle-free latch design and factory-installed RapidID barcodes, addressing the two biggest pain points in structured cabling MACs: documentation accuracy and patch-panel congestion. Integrators running 10GBASE-T backbones or specifying PoE++ (802.3bt Type 3/4) to endpoints get a single SKU that handles both the bandwidth and the 100W power budget without field labeling or snag-induced downtime.
Key Features
- 10 Gb/s Cat 6A Performance: Exceeds ANSI/TIA-568.2-D and ISO 11801 Class EA for 10GBASE-T transmission to 100 meters
- RapidID Pre-Installed Barcodes: Factory-applied asset tags integrate with Panduit RapidID software for automated port mapping and as-built documentation
- Tangle-Free Latch Design: Low-profile boot prevents snags on adjacent cables, streamlining moves and reduces patch-panel damage
- 24 AWG Solid Copper: Solid conductors maintain lower DC resistance vs. stranded, critical for PoE++ (802.3bt Type 3/4 up to 100W)
- 2500 Mating Cycles: UL 1863-rated durability with PoE load ensures field reliability across repeated MACs
- 0.250" Diameter: Slim profile maximizes airflow and cable-management density in 1U/2U patch panels
- U/UTP Construction with Foil Tape: Internal shielding limits alien crosstalk without the grounding complexity of F/UTP
The UTP6AX10GY uses unshielded twisted-pair construction with an internal foil tape separator that isolates pairs and mitigates alien crosstalk—the interference between adjacent cables in high-density bundles. This hybrid approach delivers Class EA performance without requiring grounded patch panels or shielded keystones, simplifying deployments where 10 Gb/s is mandatory but infrastructure grounding is inconsistent. Solid 24 AWG copper conductors keep DC loop resistance below 9.38 Ω/100m, ensuring voltage drop stays within 802.3bt limits even at 100W PoE loads. High-performance RJ45 plugs terminate all eight conductors with 50-microinch gold plating, rated for 2500 insertion cycles under UL 1863 with active PoE—meaning this cord will survive years of MAC work in production networks.
Field documentation is where most structured cabling projects fall apart, and RapidID barcodes solve it at the factory. Each cord ships with a unique scannable tag that integrates with Panduit's RapidID asset-management software, letting techs build an as-built port map by scanning patch cords during installation rather than manually typing switch ports into spreadsheets. The tangle-free latch compounds the efficiency gain: its low-profile boot slides past adjacent cables without snagging, so a tech pulling 48 cords from a distribution switch doesn't spend 20 minutes untangling a patch-panel spaghetti pile. For integrators running PoE++ to high-power devices—PTZ cameras, Wi-Fi 6E APs, VoIP phones—the 802.3bt Type 3/4 rating means a single copper link handles both 10 Gb/s data and 100W power, eliminating the midspan injector and the second home-run.
The UTP6AX10GY is CM-rated for general-purpose horizontal and riser installations; for plenum spaces, spec Panduit's CMP-rated equivalent. With 2500-cycle durability, full Cat 6A headroom, and native RapidID integration, this patch cord fits projects where asset tracking, high port density, and 10GBASE-T performance are non-negotiable—data center top-of-rack switches, enterprise IDF consolidation points, and AV-over-IP infrastructures running SDVoE or Dante. Integrators already standardized on Panduit's TX6A keystone jacks and patch panels get a factory-matched cord with consistent performance across the permanent link, and the RapidID barcode ensures the as-built documentation stays accurate through five years of MAC churn.
