Camden CX-WC14AXSM-PS Surface Mount Two Door Controller

We've installed the Camden CX-WC14AXSM-PS on dozens of accessible restroom retrofit projects across healthcare and commercial facilities, and it's become our go-to two-door controller for Ontario and barrier-free jurisdictions. The real operational advantage is the coordination logic — you're not managing two separate strike circuits and manually timing them. Both doors unlock in sync, and the controller won't reset the strike if either door contact is still open. That eliminates false-release scenarios where an impatient user pulls the handle before the first door is fully secured. Surface mounting is another win in retrofit work: when you're retrofitting a restroom in an occupied facility, drilling into concrete or recessing into partition studs is downtime and risk. Surface mount means the cabinet sits flat against the wall or frame, final rough-in in under an hour once strikes and contacts are in place.

The big caveat: this unit is purpose-built for the two-door restroom pattern — entry vestibule + private compartment, or dual-access symmetric layouts. If you're looking at a three-door corridor or multi-stall configuration, you need a different controller and significantly more complex wiring. We've also seen installations fail because the power supply cabinet wasn't oversized for future expansion or higher-amperage strike variants. Always spec the pre-wired kit from Camden rather than sourcing components separately; the matched power supply, wiring gauges, and connector pinouts are already validated for the two-door load and Ontario code compliance.

Technical Highlights:

• Coordinated Dual-Strike Logic: Both electric strikes activate and release in sequence without requiring external relay logic or PLC. Door contact feedback prevents reset until both door positions are confirmed secure — critical for vestibule-style restrooms where sequential access is a code requirement and a user-safety expectation.
• Door Contact Integration: Hardwired monitoring of door position switches on both doors. Real-time feedback loops prevent strike release resets if either door remains open, eliminating the operational overhead of manual verification and reducing liability exposure in accessibility audits.
• Surface Mount Enclosure: No wall recessing, no framing modification required. In retrofit projects, surface mounting cuts installation labor by 30-40% compared to flush-mount alternatives, and eliminates structural risk on existing restroom partitions.
• Pre-Wired Kit Availability: Complete kits pair the controller with matched strikes, activation switches (push-button and touchless variants), annunciators, door contacts, and power supplies. Eliminates custom wiring labor and component compatibility risk — install-ready out of the box.
• CX-WEC Emergency Integration: Compatible with Camden's emergency call system, allowing a single control pathway to handle both accessibility activation and emergency notification. Reduces installation footprint in universal restroom designs and simplifies user training.

Deployment Considerations:

• Two-door capacity only — this controller is engineered for the dual-entry restroom pattern (vestibule + private compartment or symmetric dual-access). Three-door corridors, multi-stall configurations, or non-restroom dual-strike applications require a different product; don't force-fit this unit outside its design scope.
• Power supply sizing is non-negotiable. The kit includes a pre-matched supply for the two-door load, but if you're adding a third strike or upgrading to higher-amperage solenoids later, the cabinet won't support it without replacement. Size the cabinet conservatively at install time to avoid capex re-work.
• Door contact wiring must be tested under load. We've seen installations where loose contacts on the secondary door prevented strike reset, appearing as a controller fault. Verify both door positions register correctly during commissioning before handing off to the end user.
• Surface-mount backing must be solid — wood studs or continuous metal framing. Mounting to hollow drywall without backing will cause vibration and contact chatter. If the wall substrate is questionable, sister-plate a backing board before installation.
• Accessible restroom code varies by jurisdiction — Ontario Regulation 368/13 is the design spec for this unit, but ADA Title III, California Title 24, and other regional amendments may require additional features or testing documentation. Verify compliance requirements against your project jurisdiction before purchase.

The CX-WC14AXSM-PS is the right choice for accessible restroom retrofit and modernization projects where dual-entry coordination is mandated by code and surface-mount simplicity is a capex or timeline advantage. Integrators managing healthcare facility upgrades, commercial restroom renovations, and government accessibility compliance programs will find this unit reduces labor overhead and eliminates single points of failure in the strike control logic. For full product availability, kit configurations, and compliance documentation, consult the Camden catalog.