Camden CX-MA0614-25D 1" Spacer Plate for 600 lb Magnetic Lock

Camden CX-MA0614-25D 1" Spacer Plate for 600 lb Magnetic Lock

Overview

The CX-MA0614-25D is a 1" spacer plate for 600 lb rated magnetic locks. It provides the precise standoff distance needed when the lock body must sit 1" away from the door frame surface—a common requirement when frame depth, trim, or retrofit geometry doesn't allow direct mounting. This accessory is passive (no power draw) and works with 24VDC magnetic lock installations across commercial access control systems.

Compatibility

Designed for Camden's 600 lb magnetic lock family. Confirm your lock model supports an external spacer plate before ordering; some strike designs integrate the offset internally. The plate accommodates standard frame mounting holes and bolt patterns found on double-door magnetic locks rated for this capacity. Suitable for surface-mounted and mortise installations where the frame depth creates a gap between the magnet body and the armature plate.

Installation Notes

The spacer plate installs between the magnetic lock body and the door frame using the existing lock mounting fasteners—no additional holes required. Ensure the 1" offset is the correct distance for your frame geometry before securing; verify armature alignment after tightening. Stainless steel construction resists corrosion in indoor commercial environments; avoid submersion or constant wet contact. No tools beyond a wrench or screwdriver are needed for installation.