Camden CX-MA0614-25 1" Spacer Plate for Magnetic Lock
Overview
The CX-MA0614-25 is a 1-inch spacer plate designed to provide precise standoff distance between a magnetic lock and the door frame during installation. This accessory solves the common alignment problem where magnetic locks need consistent spacing to achieve full armature contact and repeatable holding force. Deploy this plate when your door frame depth or surface condition requires the lock body to sit further from the mounting surface — a typical scenario in retrofit installations or non-standard frame geometries.
Compatibility
The CX-MA0614-25 is compatible with Camden's 600 lb magnetic lock systems operating at 24VDC. It integrates with both surface-mount and mortise-mount magnetic lock installations in networked access control environments. Confirm your specific lock model against the CX-91S and CX-92S accessory series documentation before ordering.
Installation Notes
Mount the spacer plate between the magnetic lock body and the door frame using the same fastener pattern as your lock. The 1-inch thickness accommodates standard door frame variations without compromising holding force. Verify that adding this spacer does not interfere with the armature plate clearance — typically a 1/4-inch gap is required for proper magnetic coupling. Use stainless fasteners in wet or corrosive environments to prevent rust at the assembly interface.
