Panduit P22B09M G5 Basic PDU
The Panduit P22B09M delivers 22 NEMA 5-20R outlets in a compact 32-inch vertical form factor, designed for high-density 120V power distribution in server racks, network equipment installations, and AV systems. This G5 Basic PDU supplies 30 amps at 120V single-phase through a locking NEMA L5-30P input plug with a 10-foot (3-meter) power cord, providing secure connectivity to twist-lock receptacles commonly found in datacenter and commercial power circuits. The 2-inch width and powder-coated metal chassis allow flush rack mounting without consuming valuable cabinet space, while UL certification (file E218078) ensures compliance with electrical safety standards required for enterprise and institutional deployments.
Key Features
- 22 NEMA 5-20R outlets support both standard 5-15P and higher-current 5-20P plugs for flexible equipment connectivity
- 30A 120V single-phase capacity delivers 3,600 watts total power budget for mixed server, switch, and peripheral loads
- NEMA L5-30P twist-lock input plug prevents accidental disconnection in high-vibration environments or during maintenance
- 10-foot (3m) power cord reaches distant wall receptacles or floor-mounted power distribution panels without extension cords
- 32" H × 2" W (817mm × 52mm) vertical profile fits standard 19-inch racks and two-post relay racks with minimal footprint
- Powder-coated metal construction resists corrosion and physical damage in dusty or high-traffic equipment rooms
- UL certified to file E218078 for North American electrical safety compliance
- Black finish integrates visually with rack-mounted servers, switches, and enclosures
The P22B09M addresses a persistent challenge in equipment rack deployments: providing enough outlets without creating a tangled mess of power strips and extension cords. The 22-outlet count supports dense configurations where each rack hosts multiple switches, patch panels, environmental monitors, and management appliances—each drawing modest power but collectively requiring numerous connections. The NEMA 5-20R receptacles accept both standard 5-15P plugs (typical on most IT equipment) and 5-20P plugs (found on some servers and UPS units), eliminating the need to stock multiple PDU models for different plug types. Each outlet is rated for 20 amps, though the 30-amp input and internal bus limit total draw—installers should plan for approximately 24 amps continuous load (80% of breaker rating per NEC 210.20) distributed across the 22 outlets, which translates to roughly 2,880 watts of usable capacity.
This PDU fits installations where 120V power is standard or preferred over 208V configurations. Commercial security integrators commonly encounter 120V circuits in small-to-midsize server rooms, IDF closets, retail back offices, and surveillance equipment racks where building electrical infrastructure provides standard single-phase power. The twist-lock L5-30P input plug mates with L5-30R receptacles, which are typically wired to dedicated 30-amp circuits—this locking mechanism prevents accidental pull-out when technicians move equipment or during seismic activity in regions with building code requirements for secured power connections. The 10-foot cord length accommodates racks positioned away from wall-mounted receptacles or allows connection to underfloor power distribution systems in raised-floor datacenters. Vertical mounting along the rear rail or side channel of a 19-inch rack conserves valuable U-space for active equipment, and the slim 2-inch width ensures the PDU doesn't block airflow or interfere with cable management arms.
The powder-coated metal chassis provides durability beyond molded plastic alternatives—important in installations where the PDU may be bumped during equipment changes or exposed to temperature extremes in unconditioned equipment closets. UL certification under file E218078 confirms compliance with UL 1363 (Relocatable Power Taps) and UL 1449 (Surge Protective Devices) standards, satisfying the documentation requirements for building inspectors, insurance underwriters, and corporate IT policies that mandate listed electrical components. This Panduit G5 Basic PDU delivers the outlet density, build quality, and electrical compliance that datacenter installers and security integrators need for professional rack power distribution—without the cost and complexity of metered or switched models where monitoring and remote control aren't required.
