Panduit P16B07M G5 Basic PDU
The Panduit P16B07M delivers reliable 20-amp power distribution across sixteen NEMA 5-20R outlets in a zero-U vertical form factor built for equipment racks housing surveillance NVRs, access control panels, network switches, and PoE injectors. When you're specifying power for a high-density security or IT rack where every outlet counts and circuit loading must stay within NEC guidelines, this G5-series basic PDU provides the outlet count and 120V single-phase capacity to power a full complement of gear without daisy-chaining power strips or overloading a single circuit. The 10-foot detachable power cord with NEMA 5-20P plug gives you the reach to connect to overhead or raised-floor power sources in server rooms and telecom closets, and the metal construction with powder-coated black finish stands up to the mechanical stresses of repeated plugging and rack reconfigurations over years of service.
Key Features
- 16 NEMA 5-20R outlets support up to 20A total load at 120V single phase
- NEMA 5-20P input plug with 10 ft (3 m) power cord for flexible installation
- Zero-U vertical mount design (32" H × 2" W) fits between rails without consuming rack space
- Powder-coated metal housing resists corrosion and impact in humid or dusty environments
- UL certified to E218078 for commercial and institutional installations
- G5 series construction meets Panduit's enterprise-grade reliability standards
The P16B07M's sixteen 5-20R outlets are arranged vertically along the 32-inch housing, giving you the spacing to accommodate wall-wart power supplies and right-angle plugs without blocking adjacent receptacles. At 20 amps and 120 volts single phase, the PDU supplies 2,400VA of apparent power—enough for a typical surveillance rack with four PoE NVRs (80W each), two managed switches (40W each), an access control panel (30W), and a UPS battery charger, with headroom to spare. The two-inch width keeps the PDU tight against the rack rail, preserving clearance for cable management arms and equipment with rear-projection connectors. The powder-coated metal enclosure provides both electrical grounding continuity and physical durability; unlike plastic PDUs that crack under the torque of overtightened rack screws or the weight of heavy power adapters, this unit's steel construction maintains structural integrity through repeated rack reconfigurations. The NEMA 5-20P input plug mates with standard 20-amp branch circuits or can adapt down to 15-amp circuits via a 5-15R outlet if your facility's panel capacity requires load-shedding across multiple circuits (though total load must stay within the 15A limit in that configuration). The 10-foot power cord reaches from mid-rack mounting positions to overhead cable trays or below raised-floor power outlets without requiring extension cords that add failure points and voltage drop.
In datacenter and security-system installations where uptime directly correlates with site protection and operational continuity, the P16B07M fits into architectures where each rack gets dedicated power distribution and every device draws from a known, monitored circuit. For integrators working in hospitals, schools, or government facilities with strict electrical inspection requirements, the UL E218078 certification provides the third-party validation that satisfies AHJs and procurement compliance officers. The PDU works in IT environments where you're consolidating PoE switches, servers, and storage into a single 42U rack and need to break the 20-amp circuit into sixteen individually available outlets rather than relying on six-outlet power strips that leave half your devices unpowered or force you to split loads across multiple PDUs. For surveillance racks where you're mixing NVRs, monitor arrays, fiber transceivers, and media converters, the outlet count and spacing let you plug everything in without resorting to splitters or adapters that obscure which device is drawing what load. Mounting hardware is designed for zero-U installation between the rack rails, keeping the PDU out of the equipment mounting plane so your U-count stays available for switches, servers, and patch panels. The black powder-coated finish blends with standard rack aesthetics and resists the scratches and paint chips that occur during equipment moves and cable pulls.
The P16B07M meets UL 1363 standards for relocatable power taps under UL file E218078, which satisfies NEC Article 645 for information technology equipment rooms and Article 725 for Class 2 circuits commonly found in access control and intrusion detection systems. When you're specifying power distribution for a multi-rack security operations center where each rack supports a discrete building zone or site, standardizing on the P16B07M across all racks gives you consistent outlet counts, known load capacity, and uniform mounting footprints that simplify inventory and future expansions. Panduit's G5 series represents their current-generation power platform, designed to support the higher device densities and longer service lives expected in commercial security and IT infrastructure where rack equipment remains in place for 7–10 year depreciation cycles. For integrators who've dealt with PDUs that develop loose outlets, cracked housings, or corroded contacts after a few years of service, the metal construction and UL-certified components in the P16B07M provide the durability and compliance documentation that support long-term rack deployments in climate-controlled or uncontrolled environments.
