Ubiquiti products
-
Ubiquiti
SKU: UVC-G3-F-PENDANT
Ubiquiti UVC-G3-F-PENDANT Flex Pendant Mount
Ceiling pendant mount for UniFi Flex G3 and G5 cameras
- Mounts to suspended T-bar ceiling grids, eliminating custom brackets on retrofit jobs.
- Polycarbonate enclosure handles -20 to 40 °C, suited for warehouses and HVAC-adjacent runs.
- Compact 67.7 × 60 × 53.6 mm footprint supports G3 and G5 Flex cameras from a single SKU.
$10.00 $9.99 Save $0.01The item has been added -
Ubiquiti
SKU: U-PRO-MP
Ubiquiti U-PRO-MP Mounting Hardware
Wall, pole, and rack mounting for UniFi equipment indoors and out
- Supports wall, pole, and rack installation, eliminating one-off mounting per site.
- Outdoor-rated hardware handles diverse deployment environments without additional hardware.
- At 0.4 lbs, installs on standard studs, poles, and 19-inch rails without reinforcement.
$8.50 $7.99 Save $0.51The item has been added -
Ubiquiti
SKU: UNAS-PRO-4
Ubiquiti UNAS-PRO-4 Mounting Hardware
1U rack NAS with dual 10 Gbps ports and 4-bay storage
- Mounting hardware for Ubiquiti UNAS-Pro-4 storage appliance
- 2x 10G SFP+ + 1GbE RJ45 networking for high-throughput storage
- 1U rack-mount form factor with 150W power consumption
$513.99The item has been added -
Ubiquiti
SKU: U-CABLE-PATCH-RJ45-BK
Ubiquiti U-CABLE-PATCH-RJ45-BK Cable
Black RJ-45 patch cable for UniFi network gear and Ethernet ports
- Standard RJ45 male connectors on both ends enable plug-and-play Ethernet connections.
- Black jacket simplifies color-coded cable management in mixed network environments.
- Compatible with UniFi switches, access points, and any 10/100/1000 Mbps Ethernet port.
$2.00 $1.99 Save $0.01The item has been added -
Ubiquiti
SKU: U-CABLE-PATCH-RJ45-50
Ubiquiti U-CABLE-PATCH-RJ45-50 Cable
50-pack Cat6 patch cables, 3.9" for dense rack deployments
- 50-pack Cat6 patch cables, 3.9 in (0.1m) length
- RJ45 male connectors for UniFi infrastructure
- Short-run cables for rack-to-rack jumping
$166.99The item has been added -
Ubiquiti
SKU: UB-AM-10
Ubiquiti UB-AM-10 Mounting Hardware
Universal antenna arm bracket 10-pack for AirMax deployments
- 10-pack format reduces per-site sourcing overhead for multi-site AirMax rollouts.
- Universal arm bracket fits AirMax sector antennas without site-specific fabrication.
- Single SKU covers heterogeneous mounting surfaces, cutting inventory fragmentation.
$80.00 $69.99 Save $10.01The item has been added -
Ubiquiti
SKU: UACC-WAVE-AP-MICRO-MOUNT
Ubiquiti UACC-WAVE-AP-MICRO-MOUNT Corrosion-resistant pole mount
Corrosion-resistant pole mount for up to 4 Wave APs outdoors
- Mounts up to 4 Wave AP Micro units on a single pole for full 360° coverage.
- Corrosion-resistant construction handles coastal, industrial, and outdoor environments.
- Compatible with standard telecom pole infrastructure — no custom fabrication required.
$180.99The item has been added -
Ubiquiti
SKU: UACC-UPLINK-SFP28-0.15M-10
Ubiquiti UACC-UPLINK-SFP28-0.15M-10 Direct attach cable .15M
25G SFP28 direct attach cable, 0.15M, multi-rate 1G/10G/25G
- Passive copper DAC eliminates transceiver cost for rack-adjacent SFP28 connections.
- Auto-negotiates at 1G, 10G, or 25G — one cable fits mixed-speed switching environments.
- 0.15 m length suits back-of-rack switch-to-switch links with zero optical latency penalty.
$255.99The item has been added -
Ubiquiti
SKU: UACC-UK-ULTRA-TS
Ubiquiti UACC-UK-ULTRA-TS Swiss Army Knife Table Stand
Tabletop stand for Swiss Army Knife Ultra lab and staging use
- Enables drill-free tabletop deployment of Swiss Army Knife Ultra in lab or staging.
- Compact 92.7 x 41.8 x 58.8 mm, 98 g form fits easily in a field deployment kit.
- Multi-material enclosure (PC, PBT, POM, TPE) resists impact on uneven work surfaces.
$15.00 $14.99 Save $0.01The item has been added -
Ubiquiti
SKU: UACC-UCG-INDUSTRIAL-RM
Ubiquiti UACC-UCG-INDUSTRIAL-RM Rack mount for Cloud Gateway
1U rack mount for Ubiquiti Cloud Gateway Industrial deployments
- Toolless 1U install via dual release buttons — no screwdrivers or hex keys required.
- Polycarbonate and galvanized steel housing rated -30 to 50 °C for harsh edge environments.
- Purpose-built for Ubiquiti Cloud Gateway Industrial; incompatible with other appliances.
$126.99The item has been added -
Ubiquiti
SKU: UACC-U7-PRO-XG-WALL-TS
Ubiquiti UACC-U7-PRO-XG-WALL-TS Table stand accessory, U7 Pro XG
Tabletop stand for U7 Pro XG Wall access points—temp testing and deployments
- Polycarbonate, aluminum alloy, and silicone rubber build damps vibration on bench surfaces.
- Compact 181.9 × 83.8 × 77.5 mm footprint suits lab benches, closets, and staging areas.
- Exclusively fits the U7 Pro XG Wall AP—verify model before ordering to avoid mismatches.
$39.00 $38.99 Save $0.01The item has been added -
Ubiquiti
SKU: UACC-U7-PRO-WALL-TS
Ubiquiti UACC-U7-PRO-WALL-TS aluminum table stand for U7 Pro Wal
Aluminum tabletop stand for U7 Pro Wall access points
- Aluminum enclosure at 222 g enables tool-free repositioning during site surveys.
- 92.1 × 80 mm base fits rack shelves and standard office furniture without overhang.
- Paintable finish allows stand to match facility aesthetics without additional prep.
$39.00 $38.99 Save $0.01The item has been added -
Ubiquiti
SKU: UACC-READER-PRO-AM-B
Ubiquiti UACC-READER-PRO-AM-B Angled mounting for Access Readers
Angled mounting bracket for UniFi Professional Access Readers
- Angles UniFi Pro Access Readers to match badge-tap approach vector without custom fab.
- Passive hardware — no configuration needed; installs directly with no adapters required.
- Lightweight at 0.15 lb; pre-plan cable routing to prevent strain at the mounting point.
$30.00 $29.99 Save $0.01The item has been added -
Ubiquiti
SKU: UACC-RACK-PM-KIT
Ubiquiti UACC-RACK-PM-KIT 1U Snap-In Rack Mount Inserts
20-pack 1U snap-in rack inserts with M6 cage nuts for 19-inch cabinets
- Toolless snap-in PA66 inserts cut rack commissioning time across parallel deployments.
- 20-pack covers up to 20 individual 1U slots in any standard 19-inch EIA cabinet.
- Two M6 cage nuts per insert ensure consistent fastener spacing across all rack positions.
$88.99The item has been added -
Ubiquiti
SKU: UACC-RACK-EAR-2U
Ubiquiti UACC-RACK-EAR-2U Replacement rack ears for UniFi 1U
Replacement rack ears for UniFi 1U equipment in 19-inch server racks
- Fits standard 19-inch EIA rack frames for straightforward integration into existing infrastructure.
- Includes precision rack mount inserts and screws — no need to source fasteners separately.
- Adds only 0.15 lb to system weight, keeping rack load calculations simple during planning.
$15.00 $14.99 Save $0.01The item has been added -
Ubiquiti
SKU: UACC-PRO-MAX-16-RM
Ubiquiti UACC-PRO-MAX-16-RM rack-mount accessory
1U rack mount for UniFi Pro Max 16 switch integration
- 1U, 19-inch rack-compatible enclosure fits standard 4-post and 2-post racks.
- SGCC steel and polycarbonate construction provides rigid support at 1.1 kg total.
- Purpose-built for UniFi Pro Max 16 only; verify model before ordering.
$49.00 $48.99 Save $0.01The item has been added -
Add to Cart The item has been addedUbiquiti
SKU: UACC-POE+-2.5G
Ubiquiti UACC-POE+-2.5G adapter that powers UniFi PoE+ devices
PoE+ adapter with 2.5G for UniFi devices, offloads switch power
- Offloads PoE+ power delivery from your switch, preserving switch power budget.
- 2.5G Ethernet port prevents backhaul bottlenecks in multi-gigabit UniFi deployments.
- 802.3at PoE+ output supports access points, cameras, and other UniFi PoE+ devices.
In stock · Ships same business day$19.00 $18.99 Save $0.01The item has been added -
Add to Cart The item has been addedUbiquiti
SKU: UACC-POE+++-10G
Ubiquiti UACC-POE+++-10G adapter that powers UniFi PoE+++
10G PoE+++ adapter for UniFi devices with remote power injection
- Injects PoE+++ power independently, freeing switch PoE budget for other devices.
- 10G LAN port prevents backhaul bottlenecks on multi-gigabit network cores.
- Plug-and-play AC-powered adapter; no configuration required in UniFi environments.
$49.00 $48.99 Save $0.01The item has been added -
Ubiquiti
SKU: UACC-OFC-S2-LULU-0.5M-50
Ubiquiti UACC-OFC-S2-LULU-0.5M-50 Lightweight fiber patch cable
50-pack LC duplex fiber cables, 0.5M, rated to 100G
- Supports 100G throughput, keeping pace with high-density datacenter uplinks.
- 0.5M length minimizes cable clutter for short-run patching in equipment racks.
- 50-pack quantity reduces per-port cost and simplifies large-scale fiber deployments.
$178.99The item has been added -
Ubiquiti
SKU: UACC-OFC-MA-MPMP-0.5M
Ubiquiti UACC-OFC-MA-MPMP-0.5M OM4 multi-mode fiber patch cable
0.5M OM4 MPO-12 fiber patch cable for 100G data center backbones
- OM4 multi-mode fiber delivers full 100G throughput for dense switch interconnects.
- 0.5 m length minimizes rack slack and eliminates field termination labor.
- MPO-12 Type B UPC connectors integrate with 100G optical line cards and breakout modules.
$45.00 $44.99 Save $0.01The item has been added
