Ubiquiti UACC-POE+++-10G adapter that powers UniFi PoE+++

Ubiquiti UACC-POE+++-10G PoE+++ Power Adapter

Overview

The UACC-POE+++-10G is a dedicated power and connectivity adapter that injects PoE+++ power to UniFi devices independently of your main network switch. Deploy this when switch-based PoE budgets are exhausted but you need to add powered UniFi gear — or when you're running remote UniFi devices far from the core switch and want to avoid long PoE runs over undersized cabling. The adapter provides a 10G multi-gigabit LAN connection, so it doesn't bottleneck high-speed trunk traffic back to your network core.

Compatibility

Works with UniFi PoE+++ devices only. If your UniFi gear is rated for PoE++, PoE+, or standard PoE, this adapter will overprovision power — confirm your device datasheet supports PoE+++ input before ordering. The 10G connection integrates into any UniFi network architecture where multi-gigabit backhaul is available.

Installation Notes

Connect the adapter's LAN port to an available 10G or multi-gig port on your switch or router. Plug a standard Ethernet cable from the adapter to your UniFi device. The adapter itself requires external AC power — verify outlet availability at the installation point. No additional configuration needed; the adapter is plug-and-play within UniFi environments.