Pelco

Pelco · EABE1-2X40QF18-SPT0-M1-1

Pelco EABE1-2X40QF18-SPT0-M1-1 2MP Bispectral PTZ Camera

Professional-grade bispectral imaging in a rugged PTZ platform, combining visible and thermal wavelengths for round-the-clock situational awareness

• IP66/IP67 and IK10 ratings ensure reliable operation in washdown and high-impact zones.
• H.265/H.264/MJPEG compression plus ONVIF compliance integrates with legacy and modern VMS platforms.
• Operates from -40°C to +65°C across six mount types for perimeter and critical infrastructure deployment.

Pelco · CNCVR-1001

Pelco CNCVR-1001 3/4 Inch Conduit Adapter 5-Pack

5-pack of 3/4 inch conduit adapters for cable management in surveillance installations

• IP66-rated construction ensures weatherproof cable entry for outdoor deployments.
• 5-pack format covers multiple camera mounting points in a single order.
• Compatible with Pelco dome, bullet, and pendant-mount housings for flexible routing.

Pelco · AC-USB-DOCK-050

Pelco AC-USB-DOCK-050 NDAA Compliant USB Cable

N NDAA-compliant USB cable for IP security systems

• NDAA-compliant design meets federal and defense procurement requirements.
• PoE 802.3af support delivers integrated power through a single cable run.
• ONVIF compatibility ensures interoperability across open-standard IP systems.

Pelco · KF-DOCKCROCCLAT

Pelco KF-DOCKCROCCLAT Klick Fast Crocodile Clip Anti-Tilt

Klick Fast crocodile clip attachment designed to securely mount compatible Pelco camera devices

• Anti-tilt mechanism locks camera orientation, eliminating rotation drift during operation.
• Klick Fast interface enables tool-free attachment and removal for rapid redeployment.
• Compact 2.7" × 3.5" × 1.04" footprint at 0.36 lbs suits tight or temporary mount points.

Pelco · FTRVL-ADDTLDAY

Pelco Ndaa Compliant One Additional Day Of - FTRVL-ADDTLDAY

Pelco · CM1751

Pelco CM1751 NDAA Compliant Ceiling/Pedestal/Wall Mount

Multi-configuration mounting bracket for fixed camera installations

• Supports ceiling, wall, and pedestal orientations for flexible fixed-camera layouts.
• NDAA compliant, meeting federal and enterprise supply-chain procurement requirements.
• ONVIF compatible, ensuring interoperability across multi-vendor camera deployments.

Pelco · VXP-P3-0-XN

Pelco VXP-P3-0-XN VX Power V3 Server

Compact enterprise recording and management server designed for mid-to-large IP security deployments

• Dual Intel processors handle concurrent 4K/8MP streams across 16+ cameras without frame drops.
• H.265 support cuts bitrate up to 50% vs H.264, reducing storage demand on 24/7 recording.
• Dual M.2 NVMe SSDs in RAID 1 eliminate OS-tier single points of failure for continuous uptime.

Pelco · VS-L6Q-POLE-PWR-TAP-35FT

Pelco VS-L6Q-POLE-PWR-TAP-35FT - 100-277V

35-foot field power extension designed to deliver AC/DC power from ground-mounted or wall-mounted distribution to the L6Q license plate recognition

• 35-foot cable run reaches pole-mounted L6Q cameras from ground-level AC feeds.
• Accepts 100–277V AC input, supporting both 120V and 277V commercial circuits.
• M12 connector integrates directly with the L6Q's 12 Ah swappable battery rail.

Pelco · WASEX2T4IC

Pelco WASEX2T4IC ExP Tank 10L IECEx Pipe Assembly

10-liter thermal expansion tank assembly engineered for hazardous-location installations requiring IECEx Group II certification

• IP66-rated enclosure withstands high-pressure washdowns and salt-spray environments.
• IECEx Group II certification covers explosive atmospheres without site variance approvals.
• Integrated pipe assembly eliminates field threading, reducing leak points and install time.

Pelco · VAX-TIME-BAS

Pelco NDAA Compliant Vaxtor Time-Cross Basic - VAX-TIME-BAS

• NDAA Section 889 compliant—qualifies for federally funded and government installations.
• Perpetual per-camera license integrates with existing Pelco VideoXpert and Vaxtor infrastructure.
• Tracks vehicle dwell time in defined zones and triggers alerts when thresholds are exceeded.

Pelco · VSF-L6Q-S-KIT

Pelco VSF-L6Q-S-KIT L6Q Quick Deploy Camera Solar Kit

Complete solar power system designed to enable the L6Q camera to operate in locations without grid power access

• L6Q solar power kit for off-grid camera deployments
• Pole-mount solar charging for IP67 outdoor cameras
• Eliminates trenching for power runs to remote sites

Pelco · VS-L6Q-SFT-CASE

Pelco L6Q Rapid-Deployment Carry Case - VS-L6Q-SFT-CASE

Purpose-built transport and installation enclosure for the Pelco L6Q license plate recognition system

• IP67-rated enclosure protects the L6Q during transport and outdoor deployments.
• Integrated ball-joint bracket enables tool-free angle adjustment on pole or rack mounts.
• Paintable shroud and M12 wiring support fast, site-matched installation in minutes.

Pelco · VS-L6Q-40WSP

Pelco L6Q Solar Panel Only - VS-L6Q-40WSP

40-watt solar panel module purpose-built to power the Pelco L6Q license plate recognition (LPR) camera system in off-grid or remote deployment

• IP67-rated panel withstands rain, snow, and temps from -40°C to 60°C.
• 40W, 12V DC output eliminates AC infrastructure for remote LPR deployments.
• Pole or rack mounts via included bracket and band straps for fast setup.

Pelco · VAX-AVGSPED-STD

Pelco NDAA Compliant Vaxtor Avrage Speed - VAX-AVGSPED-STD

• NDAA Section 889 compliant for federal and government camera deployments.
• Per-camera perpetual license integrates with Pelco VideoXpert and Vaxtor Analytics Engine.
• Zone-based average speed enforcement across multiple detection points covers corridors single-point radar misses.

Pelco · VB-400-DOCK-SOLO

Pelco VB-400-DOCK-SOLO USB Docking Accessory

USB docking station designed for the Pelco VB-400 series of mobile surveillance devices

• IP67-rated housing withstands dust and moisture in demanding field deployments.
• Simultaneous USB charging and data sync eliminates repeated manual cable connections.
• Compact 2.7"×3.5"×1.04" footprint fits desk or wall-mount installations easily.

Pelco · TB1751

Pelco TB1751 Light Duty Mount with Bar Clip

Light-duty mounting bracket designed for standard-weight camera installations in wall and ceiling configurations

• Bar clip fastening mounts to beams or conduit without drilling or adhesives.
• Supports wall and ceiling orientation from a single bracket — no extra hardware.
• ONVIF-compatible; integrates with Genetec, Milestone, Avigilon, and ExacqVision.

Pelco · VAX-TIME-PRO

Pelco NDAA Compliant Vaxtor Time-Cross Pro - VAX-TIME-PRO

When you need verifiable time-stamp correlation across multiple camera feeds for legal admissibility or incident reconstruction, timestamp drift

• NDAA Section 889 compliant — clears federal and government-funded procurement.
• Per-camera perpetual license eliminates recurring fees across multi-site deployments.
• Eliminates timestamp drift on Pelco VideoXpert + Vaxtor Analytics for court-ready evidence.

Pelco · SP01-001-AW

Pelco Smr Pole Top Mt Pendant Uk Pantone 427C - SP01-001-AW

When you're deploying Pelco Spectra dome cameras on poles in outdoor environments, mounting hardware needs to handle both the physical load and

• Purpose-built pole-top pendant mount designed for Pelco Spectra and Sarix domes.
• Powder-coated steel construction withstands outdoor environmental stress long-term.
• Pantone 427C light gray finish meets UK municipal and commercial consistency standards.

Pelco · VAX-INSTSPEED

Pelco NDAA Compliant Vaxtor Instant Speed Per - VAX-INSTSPEED

Speed enforcement and traffic monitoring deployments demand flexible licensing that scales with project scope

• NDAA Section 889 compliant, clearing federal and government-funded deployment requirements.
• Per-camera perpetual license scales multi-lane sites without recurring subscription costs.
• Software-based speed detection integrates with Vaxtor analytics, eliminating external radar hardware.

Pelco · LPR-VS-SHP-02

Pelco LPR-VS-SHP-02 Shipping Charge

Service charge line item for shipping costs associated with Vigilant system deployments

• Administrative line item covers shipping costs for Vigilant system deployments.
• Applies to fixed or communication-based shipping models depending on procurement type.
• Include this SKU on purchase orders alongside Vigilant cameras, recorders, and accessories.