Pelco TB1751 Light Duty Wall/Ceiling Mount Bar Clip
The Pelco TB1751 is a light-duty mounting bracket designed for standard-weight camera installations in wall and ceiling configurations. The bar clip fastening system eliminates the need for drilling or structural modification, making it ideal for temporary deployments, rental properties, or facilities where permanent installation is not permitted. This mount suits compact surveillance setups where profile minimization is a priority.
Key Features
- Dual-Orientation Design: Supports both wall and ceiling mounting without requiring separate hardware or bracket variants.
- Bar Clip Fastening: Clamps directly to existing structural elements (beams, pipes, conduit) without drilling, fasteners, or adhesives.
- Light-Duty Rating: Engineered for compact box and dome cameras (typically under 1.5 kg). Confirm camera weight against mount spec before deployment.
- ONVIF Compatible: Works with all ONVIF-compliant cameras and VMS platforms (Genetec, Milestone, Avigilon, ExacqVision).
- Low-Profile Installation: Minimal standoff from mounting surface reduces visibility and wind load on exposed perimeter installations.
- Tool-Free Adjustment: Pan and tilt adjustment via hand-tightened hardware — no hex wrench required for on-site fine-tuning.
The TB1751 is well-suited for retail environments, office lobbies, warehouse aisles, and temporary event surveillance where camera repositioning or removal may be necessary. The absence of permanent structural modifications preserves building integrity and simplifies deinstallation. Pair with low-power PoE cameras (802.3af, <5W draw) to minimize infrastructure overhead on existing network switches.
Installation typically requires 10–15 minutes per mount: identify a suitable beam or structural element of 1–2 inch diameter, position the bar clip around the target surface, and hand-tighten the clip screw until resistance is felt. Verify that the mounting surface can sustain the camera weight plus vibration load; avoid thin-wall conduit or unsupported beams. Once secured, use the integrated pan-tilt mechanism to aim the camera toward the target zone.
The TB1751 integrates seamlessly with any VMS or NVR supporting ONVIF Profile S or above. No proprietary software or licensing is required. If you are deploying heterogeneous camera brands across a single site, the ONVIF standard ensures uniform management and event scheduling across all mounts and cameras.
Marty AllisonPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
We've specified the TB1751 in dozens of light-commercial and retail installations, and it consistently solves the "renter-friendly deployment" problem where landlord consent or building code compliance rules out wall anchors and through-bolts. The bar clip design is the standout feature — it clamps around HVAC ductwork, electrical conduit, or ceiling beams with zero permanent modification. On a 20-camera retail rollout across leased space, we've seen total installation labor drop 30–40% compared to drilling and anchor-bolt rigs, and deinstallation is equally painless. That said, the light-duty load rating is a real constraint: we typically spec this for compact box cameras (under 1 kg) or small fixed domes. PTZ heads, larger outdoor housings, or heavy weather enclosures push you toward the TB1600 or TB1800 series. We've also found that bar clip tension can drift slightly over 6–12 months if the mounting surface is subject to vibration (HVAC-adjacent), so we include a quarterly tightness audit in the maintenance schedule.
Technical Highlights:
- Light-Duty Load Capacity: Rated for cameras under approximately 1.5 kg. Exceeding this weight risks camera droop and pan-tilt slippage. Always confirm actual camera weight (with lens) before installation — integrators often overlook this and face field failures.
- Bar Clip Diameter Range: Accommodates structural elements 1–2 inches in diameter. Verify beam or duct diameter at the site; oversized or undersized surfaces require alternative mounts.
- ONVIF Profile S Compliance: Ensures the mount and camera work with any standards-based VMS without proprietary codecs or vendor lock-in. Multi-site deployments benefit from the simplified device discovery and unified configuration.
- Dual-Axis Adjustment: Pan and tilt screws allow camera aim fine-tuning post-installation without breaking the structural connection. Saves a second trip for angle correction.
- Minimal Wind Load: Low-profile design reduces moment arm and flutter on exposed exterior walls compared to stand-off pole mounts. Less vibration-induced footage blur in outdoor edge cases.
Deployment Considerations:
- Bar clip tension must be rechecked after the first 2–4 weeks of service. Wooden beams settle, and metallic surfaces can shift slightly; hand-tighten the clip screw every quarter if the mount is in a high-vibration environment (above HVAC intakes, machinery rooms).
- Confirm landlord consent and building code compliance before using on rented or leased premises. Some jurisdictions restrict non-permanent fastening systems in certain building classes.
- The mount is not rated for outdoor exposure. UV-resistant coating is minimal; use only in interior or covered soffits. For true outdoor mounting, upgrade to the TB1600 or equivalent stainless-steel bracket.
- Pair only with ONVIF-compliant cameras. Non-ONVIF or proprietary-protocol cameras may lack firmware updates or discovery features that simplify large-scale deployments.
- Avoid mounting on thin-wall conduit, composite pipe, or single-layer sheet-metal ductwork. The bar clip requires a solid surface that can sustain clamping pressure and camera cantilevered load without deformation.
The TB1751 is the right choice for integrators managing retail chains, temporary events, and transitional commercial spaces where permanent installation is off limits and camera repositioning is foreseeable. It's also a go-to fallback when a site survey reveals no suitable wall studs or ceiling joists. For stable, permanent installations in owned buildings, or for heavier cameras, explore the Pelco catalog.
