Viking Electronics K-1500P-D-ASH Ash Desk Phone Ringer No Keypad

Overview

The K-1500P-D-ASH is Viking Electronics' ash-colored, no-dial-pad desk telephone unit built for single-purpose ring-and-answer deployments — lobbies, stairwells, elevator cabs, and utility areas where outbound dialing is not required and blending with ash-toned surfaces matters. Like its black counterpart the K-1500P-D, this unit carries a built-in volume-adjustable ringer and a hearing-aid compatible amplified handset with independent volume control, making it a practical fit for noisy mechanical rooms or ADA-sensitive installations where handset amplification is a code or compliance consideration.

Compatibility

The K-1500P-D-ASH is part of the Viking Electronics K-1500 series and is directly interchangeable with the K-1500P-D (black) wherever ash coloring is preferred. The K-1500 family includes analog POTS-connected variants and network-connected versions; confirm your specific infrastructure type before ordering — the K-1500P-D designation indicates a no-keypad, amplified configuration within that emergency and specialty phone line. Compatible with standard analog telephone interfaces as supported by the broader K-1500 series.

Installation Notes

Installs as surface mount or recess mount on standard wall or desk surfaces. The steel enclosure is fabricated from 16-gauge steel — sturdy enough for light vandal exposure but not rated for outdoor or high-impact environments without an additional protective housing. Finished dimensions are 5.25" wide × 4.0" tall × 2.0" deep; confirm rough-in depth when planning recess installations in thin partition walls. No dial pad means wiring terminates to line and handset only — simplifies rough-in compared to full-keypad models in the same family. For network-connected deployments, verify power sourcing requirements against your infrastructure before commissioning.