ACTi PMAX-0316 Wall Mount Bracket

Overview

The PMAX-0316 is a wall mount bracket for ACTi dome cameras, built for installs where ceiling mounting isn't practical — exterior walls, columns, soffits, or perimeter fencing where you need the camera projecting outward from a vertical surface instead of down from above. White housing color matches ACTi's dome camera finish for a uniform look on building exteriors and corridors.

Compatibility

PMAX-0316 is built specifically for ACTi's D5x, D9x, E5x, E9x, and E9xxM series dome cameras. Confirm your exact camera model falls within these series before ordering — mounting accessories in this class are typically series-specific and won't cross-fit domes outside the listed lines.

Installation Notes

This is a PoE-compatible mount, meaning it's designed to route a PoE (802.3af) cable cleanly to the camera base without a separate low-voltage power run — useful when you're pulling a single cable to the mount point and want to avoid exposed cabling on the wall surface. At 0.7 lb, it adds negligible load to the wall anchor or camera housing, so standard wall anchors rated for the camera's weight will handle the combined assembly. Package dimensions run 6.3 x 2.5 x 5.0 in, sized for a compact ship carton rather than a bulk installation kit — plan on ordering per-camera rather than assuming multi-unit packaging.

The PMAX-0316 carries a 3-Year Warranty, in line with ACTi's standard coverage on mounting hardware. Country of origin is Taiwan.

Pair this bracket with compatible ACTi dome cameras from the same series, and check the broader camera mounts and housings category if you need adapters for parapet, pole, or junction-box installs instead. If you're speccing a full exterior camera run, a PoE planning guide helps confirm your switch budget covers every mounted unit. For the recorder side of the deployment, browse network video recorders compatible with ACTi's D-series and E-series lines.