Mounting Brackets & Kits
Sub categories
Showing Results for Mounting Brackets & Kits
-
Geovision
SKU: GEO-150-MT913-000
Geovision GEO-150-MT913-000 Power Box Mount Bracket
- Secures Geovision power boxes in standard 19-inch racks for stable deployment.
- Reduces vibration and simplifies cable routing in dense rack environments.
- Supports centralized power distribution in rack-based surveillance installations.
$44.00 $43.99 Save $0.01The item has been added -
Geovision
SKU: 81-GP232-001
Geovision GPS Receiver M RS232 FOR Comp DVR - 81-GP232-001
- RS-232 serial connection injects GPS coordinates directly into DVR video metadata.
- Draws power from the DVR serial port — no external power supply required.
- Designed for Geovision Comp DVR systems; verify an unused RS-232 port before deploying.
$92.99The item has been added -
Geovision
SKU: 55-600D4-160
Geovision GV-600 D-Type 16 Camera Card 55-600D4-160
- Expands GV-600 series DVR capacity to 16 simultaneous camera feeds via PCI slot.
- Hardware-assisted compression offloads encoding from the host CPU on busy stations.
- D-Type connector integrates directly into compatible Geovision DVR hardware.
$425.00 $424.99 Save $0.01The item has been added -
Geovision
SKU: 55-G600B-080
Geovision GV-600 Hybrid DVR Capture Card DVI - 55-G600B-080
- DVI interface digitizes analog camera feeds within Geovision hybrid DVR systems.
- Modular internal expansion card consolidates legacy analog and IP cameras on one platform.
- BNC breakout panel connects directly to standard analog cameras; verify slot compatibility first.
$319.99The item has been added -
Geovision
SKU: 55-650D4-160
Geovision GV-650 D-Type 16 Camera Card 55-650D4-160
- Adds 16 camera channels to an existing GV-650 series recorder without replacing the unit.
- Internal PCI card installation requires no external power supply or additional cabling.
- Geovision software auto-detects new channels after seating, streamlining camera assignment.
$935.00 $379.99 Save $555.01The item has been added -
Geovision
SKU: 55-G800B-160
Geovision GV-800 Hybrid DVR Capture 16 CAM Card - 55-G800B-160
- Adds 16 video input channels to an existing GV-800 hybrid DVR via PCI slot.
- Enables channel scaling or field replacement without swapping the entire DVR unit.
- PCI form factor requires powered-down installation and firmware channel activation.
$1,100.00 $522.99 Save $577.01The item has been added -
Geovision
SKU: 84-AS110-100U
Geovision GV-AS110 V1.00 US (panel + Gv-reader + - 84-AS110-100U
- Combines panel, card reader, and keypad in one unit to reduce mounting space and wiring.
- Configured for North American electrical standards, simplifying US-based deployments.
- Designed for interior use; enclose in weatherproof housing for any outdoor installation.
$218.00 $217.99 Save $0.01The item has been added -
Geovision
SKU: 84-AS21200-0010
Geovision GV-AS2120 Controller With Built IN - 84-AS21200-0010
- GV-AS2120 PTZ controller with built-in PoE 802.3af
- Manages motorized camera heads across multi-camera systems
- Integrates with Geovision PTZ camera infrastructure
$352.00 $250.99 Save $101.01The item has been added -
Geovision
SKU: 84-BL15000-001U
Geovision GV-BL1500 IP Bullet CAM 1.3MP - 84-BL15000-001U
- SuperLowLux 1.3MP sensor delivers usable images in low-light corridors and parking structures.
- ONVIF compliance ensures drop-in integration with any compatible NVR or VMS platform.
- Wall and pole mount bullet form factor fits 802.3af PoE switches at a 13W power draw.
$585.00 $356.99 Save $228.01The item has been added -
Geovision
SKU: GV-FER5702
Geovision GV-FER5702 Tilting Wall Mount
Tilting wall mount for Geovision IP PTZ cameras indoors and out
- Tilting wall mount for indoor and outdoor IP PTZ camera install
- Adjustable mounting angle for varied site geometry constraints
- 1.15 lb wall or rack mount for IP PTZ camera deployment
$609.00 $445.99 Save $163.01The item has been added -
Geovision
SKU: GV-FER5702-51
Geovision GV-FER5702 Tilting Wall Mount Bracket
Tilting wall mount bracket for Geovision cameras with adjustable vertical positioning
- Tilting mechanism allows vertical angle adjustment post-install without hardware replacement.
- Maintains camera's IP66 ingress and IK10 vandal resistance ratings in outdoor deployments.
- Compatible exclusively with GV-FER5702 5MP fisheye camera; one bracket required per unit.
$86.99 $84.99 Save $2.00The item has been added -
Geovision
SKU: 400-IPSH300-V201
Geovision GV-IPSH30 V2.0 IP Camera Cable 400-IPSH300-V201
- Carries data and power over a single run, eliminating separate power pulls.
- V2.0 revision adds enhanced shielding for cleaner signals in mixed-tech environments.
- Built specifically for GV-IPSH30 series cameras to ensure pin-level compatibility.
$407.47 $274.99 Save $132.48The item has been added -
Geovision
SKU: 110-MFD2501-4F2
Geovision GV-MFD2501-4F 2M Super LOW LUX 2.1MM - 110-MFD2501-4F2
- Super low-lux sensor delivers usable footage in dim spaces without IR hardware.
- 802.3af PoE powers the camera from standard switches — no PoE+ or separate power run.
- ONVIF-compliant H.264/H.265 output integrates with GV-series NVRs and third-party VMS.
$510.00 $297.99 Save $212.01The item has been added -
Geovision
SKU: 51-MT20700-M001
Geovision Gv-Mount 207 51-MT20700-M001 Mount
- Engineered for Geovision IP PTZ cameras, ensuring proper load bearing under motor operation.
- Supports pole, wall, and ceiling installs, covering perimeter and facility-wide PTZ deployments.
- Minimal-fastener design reduces on-site assembly time and simplifies camera repositioning.
$96.00 $95.99 Save $0.01The item has been added -
Geovision
SKU: GV-MOUNT 912FE/FER
Geovision Gv-mount 912 Power BOX Mount - GV-MOUNT 912FE/FER
- Integrates AC-to-camera power at the junction point, eliminating individual wall-wart supplies.
- Supports both wall and ceiling mounting for flexible placement in multi-camera deployments.
- Centralizes cable management within the enclosure to keep connections organized and concealed.
$44.00 $43.99 Save $0.01The item has been added -
Geovision
SKU: 150-MT205-000
Geovision GV-MOUNT205 150-MT205-000 Wall Mount Bracket
- Supports both wall and rack installation from a single bracket, reducing SKU overhead.
- Compact 203×160 mm footprint fits standard mounting surfaces in tight deployments.
- Designed for Geovision camera systems, ensuring compatibility across your existing install base.
$83.28 $82.99 Save $0.29The item has been added
Mounting Brackets & Kits
Mounting brackets and kits provide secure and stable installation for IP cameras, intercom systems, access control devices, and related security equipment. Selecting the correct mounting solution ensures proper device alignment, weather protection, and long-term reliability.
Plan Your Deployment
- Wall, ceiling, pole, or corner mounting requirements
- Indoor vs outdoor environmental exposure
- Device model compatibility and load capacity
- Vandal resistance and tamper considerations
- Future service access and cable routing planning
Mounting Brackets & Kits — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 1048 working models of mounting brackets & kits sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 2MP, 4MP, Thermal, 8MP, 6MP, 20MP+, 5MP, 16MP |
| IP Rating | IP65, IP66, IP42, IP68, IP67, IP33, IP43, IP30 |
| Connectivity | Wired, Bluetooth, Wi-Fi, Cellular |
| Power | PoE, PoE+, AC/DC, Battery, PoE++, 24VAC, 12-24V AC/DC |
| Channels | 8, 16, 4 |
| Storage | microSD |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.