Mounting Brackets & Kits for IP Cameras

Plan Your Deployment

Wall, ceiling, pole, or corner mounting requirements
Indoor vs outdoor environmental exposure
Device model compatibility and load capacity
Vandal resistance and tamper considerations
Future service access and cable routing planning

Sub categories

Showing Results for Mounting Brackets & Kits

Compare

Out of stock
Pelco

SKU: RC-CM-W

Pelco RC-CM-W Corner Mount White Oculus Aeron

90-degree corner mount for dual-wall coverage with single camera
- Positions Pelco Oculus & Aeron cameras at building corners for adjacent wall surveillance
- White finish (RAL 9003) blends with standard building trim and architecture
- RC Series mounting interface for secure, repeatable installation on multiple cameras
Special Order · Usually Ships in 2-3 Weeks

$215.00 $172.99 Save $42.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Pelco

SKU: RC-PMA-W

Pelco RC-PMA-W Pole Mount Adapter White

Pole mount adapter for Pelco Oculus and Aeron multi-sensor cameras
- Converts standard camera base to secure pole-mount configuration
- White finish matches Oculus and Aeron camera bodies
- Clamping mechanism supports elevated positioning in open areas
In stock · Usually Ships Same Business Day

$78.00 $65.99 Save $12.01

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: RC-PMG-W

Pelco RC-PMG-W Swan Neck Gooseneck Mount Arm

White swan neck gooseneck mount for downward-facing Pelco cameras
- Curved arm positions cameras at standoff distance with downward lens angle
- Compatible with Pelco camera systems and housings; white finish (RAL 9003)
- NDAA Section 889 compliant for federal and regulated installations
Special Order · Usually Ships in 2-3 Weeks

$360.00 $288.99 Save $71.01

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: RC-TMP-GAL

Pelco RC-TMP-GAL Galvanic Isolation Kit

Prevents corrosion between steel towers and aluminum camera mounts
- Galvanic isolation kit for RC-TMP tower mount adapters in outdoor setups
- Protects dissimilar metal interfaces in coastal, humid, and industrial environments
- NDAA Section 889 compliant for government and regulated installations
Special Order · Usually Ships in 2-3 Weeks

$135.00 $108.99 Save $26.01

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: RC-TMP-W

Pelco RC-TMP-W Tower Mount White Oculus Aeron Series

Pole and mast tower mount for Pelco RC Series dome and bullet cameras
- White powder-coat steel construction fits standard RC Series camera interfaces
- Galvanic isolation option available for dissimilar metal pole installations
- IP66 and NEMA 4X rated for outdoor parking lots, perimeters, and building entrances
Special Order · Usually Ships in 2-3 Weeks

$215.00 $172.99 Save $42.01

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: RC-WM-W

Pelco RC-WM-W Wall Mount White Oculus Aeron

Low-profile white wall mount for Pelco RC Series dome and bullet cameras
- Surface mount design fits all Pelco RC Series dome and bullet camera models
- White finish (RAL 9003) coordinates with corner and tower mounts for multi-camera deployments
- NDAA Section 889 compliant for government and regulated installations
Special Order · Usually Ships in 2-3 Weeks

$215.00 $172.99 Save $42.01

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: SIMF122ER-9017

Pelco SIMF122ER-9017 IMF122 Spare Camera RAL 9017

12MP replacement camera, RAL 9017 jet black, IMF122-1ERS compatible
- 12MP outdoor fisheye unit pre-finished in jet black RAL 9017
- Direct drop-in spare for IMF122-1ERS installations, no field painting
- NDAA Section 889 compliant for government and regulated deployments
Special Order · Usually Ships in 2-3 Weeks

$1,504.00 $1,205.99 Save $298.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Pelco

SKU: SLSPCIL-1001

Pelco SLSPCIL-1001 In-Ceiling Mount Sarix Pro 4

Recessed ceiling mount for Sarix Pro 4 domes with flush profile
- In-ceiling recessed design sits flush with ceiling plane for minimal visual profile
- OEM-engineered specifically for Sarix Pro 4 dome geometry and retention hardware
- Integrated plenum cable routing keeps power and network cabling out of sight
In stock · Usually Ships Same Business Day

$33.00 $27.99 Save $5.01

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: SM-BB7PCAS-3398

Pelco SM-BB7PCAS-3398 Spectra 7 Swivel Arm Assembly

OEM swivel arm replacement for Pelco Spectra 7 PTZ cameras
- RAL 9003 signal white finish maintains color match on installed units
- Compatible with pendant and wall-mount configurations for flexible deployment
- NDAA Section 889 compliant for federal government surveillance systems
Special Order · Usually Ships in 2-3 Weeks

$371.74 $297.99 Save $73.75

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: SM-EM20HD-3967

Pelco SM-EM20HD-3967 Heavy-Duty Extension Arm

Heavy-duty extension arm for Pelco EM20 wall mounts with increased load capacity
- Supports greater cantilevered loads than standard EM20 arm for demanding installations
- Extends standoff distance to increase camera positioning flexibility and field of view
- Professional-grade construction rated for commercial, industrial, and NDAA-compliant deployments
Special Order · Usually Ships in 2-3 Weeks

$61.22 $49.99 Save $11.23

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: SM-IWPBBES-3235

Pelco SM-IWPBBES-3235 Surface Mount Riser

Surface mount riser for IBP3BBAP-ES bullet camera with IWP wall mount
- Precision mechanical interface ensures proper alignment and secure camera retention
- IP66 rated for outdoor surveillance deployments in harsh environmental conditions
- NDAA Section 889 compliant for government and regulated installations
Special Order · Usually Ships in 2-3 Weeks

$148.03 $123.99 Save $24.04

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: SM-PRO4SL-4679

Pelco SM-PRO4SL-4679 Pendant Beauty Sleeve for Sarix Pro 4

Architectural pendant sleeve for Sarix Pro 4 cameras in finished interiors
- OEM-designed cylindrical shroud hides pendant pipe and cable entries seamlessly
- Conceals junction boxes and hardware without obstructing camera optics or aim
- Finished architectural form blends into corporate, retail, and hospitality ceilings
Special Order · Usually Ships in 2-3 Weeks

$36.75 $30.99 Save $5.76

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: SM-SP00007-4078

Pelco SM-SP00007-4078 38-Inch Demo Display Stand

38-inch portable stand for Pelco camera demonstrations at trade shows
- 38-inch height positions cameras at comfortable viewing angle for presentations
- Lightweight design with quick setup/teardown for event portability
- Works with standard Pelco mounting interfaces; NDAA Section 889 compliant
Special Order · Usually Ships in 2-3 Weeks

$506.42 $405.99 Save $100.43

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: SM-WMVEPSW-4200

Pelco SM-WMVEPSW-4200 WMVE-SR Adapter Plate White

White adapter plate for Pelco WMVE-SR wall mount systems
- Surface mount riser (SMR) with engineered bolt pattern alignment
- Secure mechanical interface between mount structure and camera body
- NDAA Section 889 compliant for government and regulated deployments
Special Order · Usually Ships in 2-3 Weeks

$95.83 $79.99 Save $15.84

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: SP01-146A-AW

Pelco SP01-146A-AW 1.5in NPT Extension 300mm

300mm NPT extension for Pelco surface mount risers in high-ceiling spaces
- 300mm length adds pendant drop for extended camera positioning
- 1.5-inch NPT threading stacks with Pelco risers for custom heights
- Hollow pipe interior routes cable; white finish blends architectural settings
Special Order · Usually Ships in 2-3 Weeks

$95.72 $76.99 Save $18.73

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: SP01-146B-SW

Pelco SP01-146B-SW 1000mm Pipe Extension White

1000mm pipe extension for Pelco Spectra domes in high-ceiling spaces
- 1000mm (1 meter) length extends pendant drops for atriums and warehouses
- 1.5-inch NPT male/female threading connects securely to Pelco mounts
- Internal cable routing keeps wiring hidden for clean professional installations
Special Order · Usually Ships in 2-3 Weeks

$219.99

Add to Cart
The item has been added

What to Look For When Buying

The decisions that matter most before you spec.

Load Rating & Vibration Damping

Mounting brackets must support camera weight (typically 0.5–15 lbs for IP cameras) plus wind load in outdoor deployments. Improperly secured cameras cause system failure during critical incidents; select brackets rated for your camera model and environmental stress factors. Gyro mounts and rubber isolators reduce vibration in high-wind or traffic-adjacent zones.

Cable Routing & PoE Management

Mounting kits with integrated cable glands and strain relief prevent cable pinch points and maintain PoE power delivery stability. Conduit clips and backing plates organize cables at the source, reducing troubleshooting time and protecting against accidental disconnection during maintenance.

Material & Corrosion Resistance

Outdoor and coastal installations require stainless steel or powder-coated aluminum brackets to prevent rust and material degradation. Salt spray, humidity, and UV exposure degrade standard steel within 6–12 months; specify 300/316 stainless for marine environments and 6063 aluminum for standard outdoor use.

Installation Standard & Brand Compatibility

Major brands like Axis, Hanwha, and Vivotek design proprietary mounting interfaces alongside VESA and ISO standard mounts. Verify bracket compatibility with your camera model before procurement; cross-brand mounts may misalign optical paths or create cable stress points.

Height, Angle & Optical Alignment

Camera mounting height and tilt affect pixel density and DORI (Detection, Observation, Recognition, Identification) distances. Adjustable brackets allow field-level fine-tuning; fixed mounts require accurate site survey and pre-deployment calculations to avoid costly repositioning after installation.

Conduit Seal & Weatherproofing

Water ingress at cable entry points causes short circuits and sensor corrosion in wet environments. Select kits with silicone gaskets, stainless steel cable glands, and IP67-rated enclosures; test seals during initial deployment to prevent mid-season failures.

Technology Stack

The specs and acronyms that actually affect mounting brackets & kits performance.

VESA Mount Standards (75/100/200 mm)

Standardized hole patterns used by consumer electronics and some IP camera models. Allows universal bracket compatibility across manufacturers, but always verify camera's screw pitch and load rating before mixing brands.

Wind Load Rating (lbs @ mph)

Manufacturers specify maximum wind speed brackets withstand without camera slip or structural flex. Outdoor installations require ratings matching local weather extremes; most outdoor brackets support 60–120 mph sustained winds, but rooftop or exposed mounting may demand 150+ mph ratings.

Stainless Steel Grades (304/316)

Grade 304 resists general corrosion in most climates; Grade 316 adds molybdenum for superior salt-spray tolerance in coastal zones. Galvanized steel (zinc coating) offers cost savings but degrades 3–5 years faster than stainless in humid/marine environments.

Cable Gland Certifications (IP67/IP68)

IP rating indicates water and dust ingress protection at cable entry. IP67 withstands temporary immersion; IP68 is rated for continuous submersion. Select IP67 minimum for outdoor camera mounts, IP68 for wet-room intercoms and dock-area access readers.

Gyro Mounts & Vibration Damping

Rubber or elastomer isolators reduce micro-vibrations transmitted from poles or wind, stabilizing video in high-motion environments. Critical for PTZ cameras on rooftop poles or traffic-adjacent installations; adds 0.5–2 lbs to mounting weight.

Conduit Diameter & Strain Relief

Brackets specify maximum conduit size (typically 0.5–1.5 inches) and cable bend radius. Exceeding bend-radius limits degrades PoE conductor insulation; use clips and backing plates to maintain manufacturer-specified minimum bend radius (usually 4–6 inches for Ethernet).

Typical Deployment Scenarios

Multi-Story Office Lobby (15 cameras, mixed mount types)

Combine ceiling-mount brackets for overview domes at entry points, corner brackets for stairwell coverage, and recessed in-wall mounts for elevator vestibules. Use Hanwha or Axis unified bracket kits to simplify procurement; junction-box assemblies pre-mount cable glands and backing plates, reducing on-site assembly by 40%.

Outdoor Parking Lot Perimeter (24 cameras, 30-ft poles)

Specify heavy-duty pole mounts rated for 80+ mph wind load, stainless steel hardware, and gyro isolation for vibration damping. Include pendant conduit kits with silicone gaskets and IP67 glands; plan cable routing inside pole conduit to protect PoE runs from weather and UV degradation.

Hospital Intercom & Card-Reader Network (40 stations, recessed mount)

Use recessed trim-ring kits designed for flush in-wall mounting at staff stations, nurse calls, and secure doors. Select 316 stainless trim rings; pair with concealed junction boxes to route cables through wall cavities, maintaining clean aesthetics while protecting core network connections from physical damage.

Warehouse Dock & Data-Capture Zone (8 cameras, industrial-grade PTZ)

Heavy-duty PTZ mounts on gantry beams require gyro dampers and reinforced backing plates rated for 20+ lbs static load. Route PoE and pan-tilt control cables through conduit; ensure sufficient power budget per PoE planning guidance for simultaneous motor operation across all units.

Frequently Asked Questions

What's the difference between VESA and proprietary camera mounts?

VESA (75/100/200 mm) are universal screw-hole patterns used by monitors and some IP cameras, allowing mixed-brand bracket compatibility. Proprietary mounts are manufacturer-specific and often integrate cable routing and power connectors for a given camera family. Always verify your camera's mounting interface before ordering; mixing standards can misalign the lens or create cable stress.

How do I choose between wall, pole, and ceiling mounting?

Wall mounts suit indoor hallways and perimeter coverage; ceiling mounts provide overhead overview angles; pole mounts enable tall outdoor installations for parking lots and large perimeters. Consider viewing angle (DORI distance), cable routing (PoE run length), and environmental exposure (rain, wind, UV). Outdoor deployments typically require pole or soffit brackets with stainless hardware and weatherproof conduit seals.

What wind-load rating do I need for rooftop or pole-mounted cameras?

Most outdoor brackets are rated 60–80 mph; rooftop and tall-pole installations in high-wind zones (hurricane, mountain, or exposed coastal areas) require 100–150+ mph ratings. Consult local building codes and weather records for your site. Undersized brackets allow camera drift, misaligning views and degrading identification accuracy over distance.

Why should I use stainless steel brackets in coastal or humid climates?

Standard steel and galvanized coatings corrode within 2–5 years in salt-spray or high-humidity zones, causing bracket failure and camera drop hazards. Stainless 304 resists general corrosion; 316-grade adds molybdenum for superior marine tolerance. The upfront cost (typically 20–40% more) prevents emergency replacement and liability exposure.

What's an IP67 cable gland, and why does it matter for outdoor mounts?

IP67 means the gland prevents dust and temporary water submersion at cable entry points. Water ingress corrodes connectors and shorts PoE circuits, causing mid-deployment failures. Pair IP67 glands with silicone gaskets and stainless fasteners; test seals before final installation to confirm weatherproofing.

Can I use the same mounting bracket for different camera brands?

Only if both cameras share VESA or ISO mounting standards. Proprietary mounts (common in Axis, Vivotek, and Hanwha models) are not interchangeable. Mixing brands often requires adapter plates, which add bulk, cost, and potential optical misalignment. Standardize on one or two manufacturer families per project to simplify spare-parts inventory and on-site troubleshooting.

Mounting Brackets & Kits

Plan Your Deployment

Sub categories

Showing Results for Mounting Brackets & Kits

Pelco RC-CM-W Corner Mount White Oculus Aeron

Pelco RC-PMA-W Pole Mount Adapter White

Pelco RC-PMG-W Swan Neck Gooseneck Mount Arm

Pelco RC-TMP-GAL Galvanic Isolation Kit

Pelco RC-TMP-W Tower Mount White Oculus Aeron Series

Pelco RC-WM-W Wall Mount White Oculus Aeron

Pelco SIMF122ER-9017 IMF122 Spare Camera RAL 9017

Pelco SLSPCIL-1001 In-Ceiling Mount Sarix Pro 4

Pelco SM-BB7PCAS-3398 Spectra 7 Swivel Arm Assembly

Pelco SM-EM20HD-3967 Heavy-Duty Extension Arm

Pelco SM-IWPBBES-3235 Surface Mount Riser

Pelco SM-PRO4SL-4679 Pendant Beauty Sleeve for Sarix Pro 4

Pelco SM-SP00007-4078 38-Inch Demo Display Stand

Pelco SM-WMVEPSW-4200 WMVE-SR Adapter Plate White

Pelco SP01-146A-AW 1.5in NPT Extension 300mm

Pelco SP01-146B-SW 1000mm Pipe Extension White

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Mounting Brackets & Kits

Frequently Asked Questions

Related Categories

Engineering Reading