Mounting Brackets & Kits for IP Cameras

Plan Your Deployment

Wall, ceiling, pole, or corner mounting requirements
Indoor vs outdoor environmental exposure
Device model compatibility and load capacity
Vandal resistance and tamper considerations
Future service access and cable routing planning

Sub categories

Showing Results for Mounting Brackets & Kits

Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QJB504-W

i-PRO WV-QJB504-W White Base Bracket Mount

Ceiling & wall mount for i-PRO IP cameras, white finish, indoor/outdoor
- Dual orientation (ceiling/wall) eliminates need for multiple bracket SKUs
- Durable construction rated IP66/IK10 for indoor and outdoor environments
- Precision engineering holds camera stable without vibration or drift
In stock · Usually Ships Same Business Day

$108.32 $96.99 Save $11.33

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-QJB506-B

i-PRO WV-QJB506-B Base Bracket Black

Aluminum bracket for i-PRO fixed cameras, wall/ceiling/corner mount
Special Order · Usually Ships in 2-3 Weeks

$174.69 $150.99 Save $23.70

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-QLR100-W

i-PRO WV-QLR100-W Light Rail Mounting Bracket

Light rail mounting bracket for i-PRO systems, 1 kg capacity
Special Order · Usually Ships in 2-3 Weeks

$144.99 $129.99 Save $15.00

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-QPL500-B

i-PRO WV-QPL500-B Pole Mount Bracket Black

Pole mount bracket for i-PRO cameras, indoor and outdoor surveillance
- Black finish bracket designed for pole installation on i-PRO camera systems
- Compatible with WV-X15xx series cameras for fixed surveillance deployments
- Supports both indoor and outdoor surveillance applications with stable mounting
Special Order · Usually Ships in 2-3 Weeks

$292.06 $250.99 Save $41.07

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QPL500-W RB

i-PRO WV-QPL500-W RB Pole Mount Bracket

Pole and wall mount bracket for i-PRO cameras, die-cast aluminum
In stock · Usually Ships Same Business Day

$110.02 $107.99 Save $2.03

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-QPL500S-W

i-PRO WV-QPL500S-W Pole Mount Bracket

Pole mount bracket with die-cast aluminum for outdoor surveillance
Special Order · Usually Ships in 2-3 Weeks

$200.88 $172.99 Save $27.89

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-QRM001

i-PRO WV-QRM001 Black Vertical Mount Bracket

Vertical mount bracket for i-PRO camera systems in black finish
- Discrete black powder-coat construction for professional installations
- Engineered for i-PRO camera compatibility with secure mounting
- IK10-rated durability and IP67 weather resistance for outdoor use
Special Order · Usually Ships in 2-3 Weeks

$76.77 $68.99 Save $7.78

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-QRM101

i-PRO WV-QRM101 Rack Mount Bracket

19-inch rack mount bracket for i-PRO equipment in standard installations
- Mounts securely in standard 19-inch rack systems for organized deployments
- Black powder-coat finish maintains professional appearance in data centers
- Purpose-engineered for i-PRO camera and accessory compatibility
Special Order · Usually Ships in 2-3 Weeks

$76.77 $68.99 Save $7.78

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-QRM201

i-PRO WV-QRM201 Black Wall Mount Bracket

Black wall mount bracket for i-PRO camera systems, indoor/outdoor
- Adjustable positioning support for flexible camera angle installation
- IP67-rated, IK10 impact-resistant construction for outdoor durability
- Compatible across i-PRO camera portfolio for unified deployments
Special Order · Usually Ships in 2-3 Weeks

$42.64 $38.99 Save $3.65

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-QSR501-B

i-PRO WV-QSR501-B 4-Screw Black Wall Mount Bracket

4-screw wall bracket for i-PRO dome cameras, black finish
- 4-screw configuration distributes load evenly for stable mounting
- Black powder-coat finish blends seamlessly in indoor surveillance
- Compatible with i-PRO dome camera models for direct installation
Special Order · Usually Ships in 2-3 Weeks

$154.99 $138.99 Save $16.00

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QSR501-W

i-PRO WV-QSR501-W Wall Mount Bracket for Dome Cameras

White wall mount bracket for dome cameras with 4-screw secure fit
- 4-screw attachment distributes load and resists vibration in fixed indoor setups
- White finish blends into standard ceiling and wall infrastructure
- Wall-mount design allows flexible positioning without overhead drilling
In stock · Usually Ships Same Business Day

$139.19 $124.99 Save $14.20

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QSR501F-W

i-PRO WV-QSR501F-W ISO Female White Wall Mount Bracket

White wall-mount bracket with ISO female thread for i-PRO dome cameras
- 1.5" Rp thread specification ensures secure, vibration-resistant mechanical mounting
- Low-profile white finish integrates seamlessly into ceiling and wall installations
- Fixed positioning design simplifies retrofit deployments without overhead anchoring
In stock · Usually Ships Same Business Day

$136.47 $121.99 Save $14.48

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QSR501F1-W

i-PRO WV-QSR501F1-W White Wall Mount Bracket for Dome Cameras

Wall mount bracket for i-PRO dome cameras with 1.5" NPS connection
- 1.5" NPS female ANSI thread fits i-PRO dome cameras without re-drilling
- White powder-coat finish blends into light interior surfaces
- Compact wall-mounted form factor for corridors and entry points
In stock · Usually Ships Same Business Day

$101.81 $90.99 Save $10.82

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-QSR501M-W

i-PRO WV-QSR501M-W ISO Male White Wall Mount Bracket

ISO male wall bracket for dome cameras indoors and outdoors
- 1.5-inch radius design allows flexible viewing angle adjustment
- White powder-coat finish resists corrosion in mixed environments
- ISO male connector integrates with compatible i-PRO dome systems
Special Order · Usually Ships in 2-3 Weeks

$136.47 $121.99 Save $14.48

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QSR502A-W

i-PRO WV-QSR502A-W Wall Mount Bracket for Dome Cameras

Wall mount bracket for i-PRO dome cameras with 4-screw design
- Four-screw fastening spreads load across multiple anchor points
- White powder-coat finish blends into standard indoor environments
- Rigid mounting platform minimizes vibration and camera drift
In stock · Usually Ships Same Business Day

$68.24 $60.99 Save $7.25

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-QSR503F-W

i-PRO WV-QSR503F-W Wall Mount Bracket ISO 1.5 Rp

White wall mount bracket for i-PRO dome cameras with ISO 1.5" Rp connector
- ISO female connector with 1.5" Rp tapered pipe thread for standardized coupling
- Powder-coated steel construction rated for indoor and outdoor wall installations
- 11.02 lbs capacity supports secure mounting of compatible i-PRO dome network cameras
Special Order · Usually Ships in 2-3 Weeks

$85.30 $76.99 Save $8.31

Add to Cart
The item has been added

What to Look For When Buying

The decisions that matter most before you spec.

Load Rating & Vibration Damping

Mounting brackets must support camera weight (typically 0.5–15 lbs for IP cameras) plus wind load in outdoor deployments. Improperly secured cameras cause system failure during critical incidents; select brackets rated for your camera model and environmental stress factors. Gyro mounts and rubber isolators reduce vibration in high-wind or traffic-adjacent zones.

Cable Routing & PoE Management

Mounting kits with integrated cable glands and strain relief prevent cable pinch points and maintain PoE power delivery stability. Conduit clips and backing plates organize cables at the source, reducing troubleshooting time and protecting against accidental disconnection during maintenance.

Material & Corrosion Resistance

Outdoor and coastal installations require stainless steel or powder-coated aluminum brackets to prevent rust and material degradation. Salt spray, humidity, and UV exposure degrade standard steel within 6–12 months; specify 300/316 stainless for marine environments and 6063 aluminum for standard outdoor use.

Installation Standard & Brand Compatibility

Major brands like Axis, Hanwha, and Vivotek design proprietary mounting interfaces alongside VESA and ISO standard mounts. Verify bracket compatibility with your camera model before procurement; cross-brand mounts may misalign optical paths or create cable stress points.

Height, Angle & Optical Alignment

Camera mounting height and tilt affect pixel density and DORI (Detection, Observation, Recognition, Identification) distances. Adjustable brackets allow field-level fine-tuning; fixed mounts require accurate site survey and pre-deployment calculations to avoid costly repositioning after installation.

Conduit Seal & Weatherproofing

Water ingress at cable entry points causes short circuits and sensor corrosion in wet environments. Select kits with silicone gaskets, stainless steel cable glands, and IP67-rated enclosures; test seals during initial deployment to prevent mid-season failures.

Technology Stack

The specs and acronyms that actually affect mounting brackets & kits performance.

VESA Mount Standards (75/100/200 mm)

Standardized hole patterns used by consumer electronics and some IP camera models. Allows universal bracket compatibility across manufacturers, but always verify camera's screw pitch and load rating before mixing brands.

Wind Load Rating (lbs @ mph)

Manufacturers specify maximum wind speed brackets withstand without camera slip or structural flex. Outdoor installations require ratings matching local weather extremes; most outdoor brackets support 60–120 mph sustained winds, but rooftop or exposed mounting may demand 150+ mph ratings.

Stainless Steel Grades (304/316)

Grade 304 resists general corrosion in most climates; Grade 316 adds molybdenum for superior salt-spray tolerance in coastal zones. Galvanized steel (zinc coating) offers cost savings but degrades 3–5 years faster than stainless in humid/marine environments.

Cable Gland Certifications (IP67/IP68)

IP rating indicates water and dust ingress protection at cable entry. IP67 withstands temporary immersion; IP68 is rated for continuous submersion. Select IP67 minimum for outdoor camera mounts, IP68 for wet-room intercoms and dock-area access readers.

Gyro Mounts & Vibration Damping

Rubber or elastomer isolators reduce micro-vibrations transmitted from poles or wind, stabilizing video in high-motion environments. Critical for PTZ cameras on rooftop poles or traffic-adjacent installations; adds 0.5–2 lbs to mounting weight.

Conduit Diameter & Strain Relief

Brackets specify maximum conduit size (typically 0.5–1.5 inches) and cable bend radius. Exceeding bend-radius limits degrades PoE conductor insulation; use clips and backing plates to maintain manufacturer-specified minimum bend radius (usually 4–6 inches for Ethernet).

Typical Deployment Scenarios

Multi-Story Office Lobby (15 cameras, mixed mount types)

Combine ceiling-mount brackets for overview domes at entry points, corner brackets for stairwell coverage, and recessed in-wall mounts for elevator vestibules. Use Hanwha or Axis unified bracket kits to simplify procurement; junction-box assemblies pre-mount cable glands and backing plates, reducing on-site assembly by 40%.

Outdoor Parking Lot Perimeter (24 cameras, 30-ft poles)

Specify heavy-duty pole mounts rated for 80+ mph wind load, stainless steel hardware, and gyro isolation for vibration damping. Include pendant conduit kits with silicone gaskets and IP67 glands; plan cable routing inside pole conduit to protect PoE runs from weather and UV degradation.

Hospital Intercom & Card-Reader Network (40 stations, recessed mount)

Use recessed trim-ring kits designed for flush in-wall mounting at staff stations, nurse calls, and secure doors. Select 316 stainless trim rings; pair with concealed junction boxes to route cables through wall cavities, maintaining clean aesthetics while protecting core network connections from physical damage.

Warehouse Dock & Data-Capture Zone (8 cameras, industrial-grade PTZ)

Heavy-duty PTZ mounts on gantry beams require gyro dampers and reinforced backing plates rated for 20+ lbs static load. Route PoE and pan-tilt control cables through conduit; ensure sufficient power budget per PoE planning guidance for simultaneous motor operation across all units.

Frequently Asked Questions

What's the difference between VESA and proprietary camera mounts?

VESA (75/100/200 mm) are universal screw-hole patterns used by monitors and some IP cameras, allowing mixed-brand bracket compatibility. Proprietary mounts are manufacturer-specific and often integrate cable routing and power connectors for a given camera family. Always verify your camera's mounting interface before ordering; mixing standards can misalign the lens or create cable stress.

How do I choose between wall, pole, and ceiling mounting?

Wall mounts suit indoor hallways and perimeter coverage; ceiling mounts provide overhead overview angles; pole mounts enable tall outdoor installations for parking lots and large perimeters. Consider viewing angle (DORI distance), cable routing (PoE run length), and environmental exposure (rain, wind, UV). Outdoor deployments typically require pole or soffit brackets with stainless hardware and weatherproof conduit seals.

What wind-load rating do I need for rooftop or pole-mounted cameras?

Most outdoor brackets are rated 60–80 mph; rooftop and tall-pole installations in high-wind zones (hurricane, mountain, or exposed coastal areas) require 100–150+ mph ratings. Consult local building codes and weather records for your site. Undersized brackets allow camera drift, misaligning views and degrading identification accuracy over distance.

Why should I use stainless steel brackets in coastal or humid climates?

Standard steel and galvanized coatings corrode within 2–5 years in salt-spray or high-humidity zones, causing bracket failure and camera drop hazards. Stainless 304 resists general corrosion; 316-grade adds molybdenum for superior marine tolerance. The upfront cost (typically 20–40% more) prevents emergency replacement and liability exposure.

What's an IP67 cable gland, and why does it matter for outdoor mounts?

IP67 means the gland prevents dust and temporary water submersion at cable entry points. Water ingress corrodes connectors and shorts PoE circuits, causing mid-deployment failures. Pair IP67 glands with silicone gaskets and stainless fasteners; test seals before final installation to confirm weatherproofing.

Can I use the same mounting bracket for different camera brands?

Only if both cameras share VESA or ISO mounting standards. Proprietary mounts (common in Axis, Vivotek, and Hanwha models) are not interchangeable. Mixing brands often requires adapter plates, which add bulk, cost, and potential optical misalignment. Standardize on one or two manufacturer families per project to simplify spare-parts inventory and on-site troubleshooting.

Mounting Brackets & Kits

Plan Your Deployment

Sub categories

Showing Results for Mounting Brackets & Kits

i-PRO WV-QJB504-W White Base Bracket Mount

i-PRO WV-QJB506-B Base Bracket Black

i-PRO WV-QLR100-W Light Rail Mounting Bracket

i-PRO WV-QPL500-B Pole Mount Bracket Black

i-PRO WV-QPL500-W RB Pole Mount Bracket

i-PRO WV-QPL500S-W Pole Mount Bracket

i-PRO WV-QRM001 Black Vertical Mount Bracket

i-PRO WV-QRM101 Rack Mount Bracket

i-PRO WV-QRM201 Black Wall Mount Bracket

i-PRO WV-QSR501-B 4-Screw Black Wall Mount Bracket

i-PRO WV-QSR501-W Wall Mount Bracket for Dome Cameras

i-PRO WV-QSR501F-W ISO Female White Wall Mount Bracket

i-PRO WV-QSR501F1-W White Wall Mount Bracket for Dome Cameras

i-PRO WV-QSR501M-W ISO Male White Wall Mount Bracket

i-PRO WV-QSR502A-W Wall Mount Bracket for Dome Cameras

i-PRO WV-QSR503F-W Wall Mount Bracket ISO 1.5 Rp

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Mounting Brackets & Kits

Frequently Asked Questions

Related Categories

Engineering Reading