Mounting Brackets & Kits
Sub categories
Showing Results for Mounting Brackets & Kits
-
Ubiquiti
SKU: UB-AM-10
Ubiquiti UB-AM-10 Mounting Hardware
Universal antenna arm bracket 10-pack for AirMax deployments
- 10-pack format reduces per-site sourcing overhead for multi-site AirMax rollouts.
- Universal arm bracket fits AirMax sector antennas without site-specific fabrication.
- Single SKU covers heterogeneous mounting surfaces, cutting inventory fragmentation.
$69.99The item has been added -
Ubiquiti
SKU: UCI
Ubiquiti UCI Mounting Hardware
1U rack mount for Ubiquiti UCI cable modem with standard EIA compatibility
- 1U rack profile integrates flush into standard 19-inch EIA cabinets alongside network appliances.
- Preserves unobstructed access to the 2.5GbE uplink and DOCSIS 3.1 WAN port connectors.
- Tool-free bracket installation requires only standard M5/M6 rack screws for fast deployment.
$279.00 $261.99 Save $17.01The item has been added -
Ubiquiti
SKU: UNAS-PRO-4
Ubiquiti UNAS-PRO-4 Mounting Hardware
1U rack NAS with dual 10 Gbps ports and 4-bay storage
- Mounting hardware for Ubiquiti UNAS-Pro-4 storage appliance
- 2x 10G SFP+ + 1GbE RJ45 networking for high-throughput storage
- 1U rack-mount form factor with 150W power consumption
$513.99The item has been added -
Ubiquiti
SKU: UTP-G3-TOUCH-WALL
Ubiquiti UTP-G3-TOUCH-WALL Mounting Hardware
Wall-mount VoIP phone with 7-inch touch display and PoE power
- Dual GbE RJ45 ports enable inline switch wiring, eliminating extra wall drops.
- PoE 802.3af over USB-C simplifies single-cable deployment; max draw is 11W.
- NDAA-compliant hardware with NFC (ISO 14443A/B, 15693) suits access-controlled sites.
$409.99The item has been added -
Ubiquiti
SKU: UVC-G3-F-PENDANT
Ubiquiti UVC-G3-F-PENDANT Flex Pendant Mount
Ceiling pendant mount for UniFi Flex G3 and G5 cameras
- Mounts to suspended T-bar ceiling grids, eliminating custom brackets on retrofit jobs.
- Polycarbonate enclosure handles -20 to 40 °C, suited for warehouses and HVAC-adjacent runs.
- Compact 67.7 × 60 × 53.6 mm footprint supports G3 and G5 Flex cameras from a single SKU.
$10.00 $9.99 Save $0.01The item has been added -
Unitech
SKU: 4070-900018G
Unitech TB170 VESA Mount - 4070-900018G
- VESA-pattern mount bracket for the Unitech TB170
- Connects to monitor arms, wall mounts, and desk fixtures
- Standardized VESA pattern for flexible mounting options
$49.00 $48.99 Save $0.01The item has been added -
Valcom
SKU: S-560
Valcom S-560 20-Watt Wall Mount Attenuator
Wall-mount 20W attenuator for speaker level control without rewiring
- 20W wall-mount attenuator for direct level adjustment at the speaker
- Tap-select audio levels for per-zone volume tuning
- 0.85 lb wall-mount attenuator for commercial public address loops
$78.35 $77.99 Save $0.36The item has been added -
Valcom
SKU: SM120
Valcom SM120 120-Watt Wall Mount Amplifier
120W wall-mount amplifier for voice paging and facility announcements
- 120W output covers large office, warehouse, retail, or institution
- Drives multiple speakers across area without pushing distortion
- 7.65 lb wall or column mount amplifier made in the United States
In stock · Ships same business day$1,328.86 $709.99 Save $618.87 -
Add to Cart The item has been addedValcom
SKU: V-2992-W
Valcom V-2992-W Wall Mount Volume Control
Wall-mount volume control with mic input for paging and audio distribution
- Wall-mount install on standard interior walls, no bell box required
- Microphone input pass-through for two-way communication paths
- 0.8 lb volume control made in the United States with 3-yr warranty
In stock · Ships same business day$69.19 $68.99 Save $0.20The item has been added -
Valcom
SKU: V-9804
Valcom V-9804 Speaker Mounting Bracket for V-1440
Rack-mount bracket for Valcom V-1440 speakers with mic support
- Rack-mount bracket designed for Valcom V-1440 speaker install
- Stable positioning in standard 19-inch equipment racks
- 0.8 lb rack-mount bracket made in the United States
$53.93 $52.99 Save $0.94The item has been added -
Valcom
SKU: V-9805
Valcom V-9805 Vandal-Resistant Recessed Enclosure
Stainless steel recessed enclosure for FlexHorn speakers in vandal-prone areas
- Stainless steel faceplate resists corrosion in damp indoor spaces
- Recessed enclosure for flush install in walls or column structures
- 6.05 lb vandal-resistant recessed enclosure made in the United States
$173.99The item has been added -
Valcom
SKU: V-9809
Valcom V-9809 Vandal Resistant Flexhorn Enclosure
Heavy gauge steel enclosure for Valcom FlexHorn speakers in high-impact areas
- Heavy gauge steel build for gymnasiums and high-risk environments
- Surface wall mount for FlexHorn speaker deployment
- 7 lb vandal-resistant enclosure with vandal-resistant rating
$185.19 $184.99 Save $0.20The item has been added -
Valcom
SKU: V-9816M
Valcom V-9816M Metal Bridge Backbox Combo
Metal bridge/backbox combo for V-1420 ceiling speakers
- Combined metal bridge and backbox in one ceiling-mount assembly
- Reduces install steps and risk of misalignment vs. separate parts
- 4.2 lb backbox/bridge combo with 3-year warranty
$145.50 $144.99 Save $0.51The item has been added -
Valcom
SKU: V-9910-YEL
Valcom V-9910-YEL Doorbox Weather Guard Yellow
Steel weather guard for Valcom doorplate speakers in outdoor settings
- Steel weather guard for outdoor Valcom doorplate speaker install
- Shields mic and speaker components from rain, snow, and moisture
- 1.15 lb yellow steel doorbox guard made in the United States
$67.16 $66.99 Save $0.17The item has been added -
Valcom
SKU: V-9912M-10
Valcom V-9912M-10 Metal Pre-Construction Ceiling Mounting Ring for 8-Inch Speakers
Metal pre-construction ring for 8-inch ceiling speakers, rough-in phase
- Pre-construction install during rough-in, no drywall patches required
- 8-inch speaker compatibility for standard ceiling speaker assemblies
- 0.5 lb metal mounting ring for new-build ceiling speaker drops
In stock · Ships same business day$54.95 $53.99 Save $0.96 -
Valcom
SKU: V-9912P-12
Valcom V-9912P-12 Plastic Ceiling Mounting Ring
8-inch ceiling speaker retrofit ring for existing drywall
- Compatible with standard 8-inch round ceiling speaker flanges
- Non-conductive plastic for safe installation near power conduits
- 0.7 lb ceiling-mount accessory ring made in the United States
$28.49 $27.99 Save $0.50The item has been added
Mounting Brackets & Kits
Mounting brackets and kits provide secure and stable installation for IP cameras, intercom systems, access control devices, and related security equipment. Selecting the correct mounting solution ensures proper device alignment, weather protection, and long-term reliability.
Plan Your Deployment
- Wall, ceiling, pole, or corner mounting requirements
- Indoor vs outdoor environmental exposure
- Device model compatibility and load capacity
- Vandal resistance and tamper considerations
- Future service access and cable routing planning
Mounting Brackets & Kits — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 1048 working models of mounting brackets & kits sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 2MP, 4MP, Thermal, 8MP, 6MP, 20MP+, 5MP, 16MP |
| IP Rating | IP65, IP66, IP42, IP68, IP67, IP33, IP43, IP30 |
| Connectivity | Wired, Bluetooth, Wi-Fi, Cellular |
| Power | PoE, PoE+, AC/DC, Battery, PoE++, 24VAC, 12-24V AC/DC |
| Channels | 8, 16, 4 |
| Storage | microSD |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.