Electrical & Power
Sub categories
Showing Results for Electrical & Power
-
Add to Cart The item has been addedELK Products
SKU: ELK-SWR
ELK Products Surge Protector Module - ELK-SWR
- RF directional coupler and power meter for transmission line testing
- Measures forward power, reverse power, and VSWR inline with TX
- 770-790g unit installs between transmitter and antenna feed
$17.99The item has been added -
FLIR
SKU: CB-PLBX-31
FLIR Pole Junction Box for CB-31 Series - CB-PLBX-31
- Pole junction box for FLIR CB-31 series bullet cameras
- Weather-resistant enclosure protects field cable connections
- Consolidates power + network + I/O cabling at the pole
$229.00 $228.99 Save $0.01The item has been added -
FLIR
SKU: CB-PLBX-62
FLIR Pole Junction Box for FB-Series - CB-PLBX-62
- Pole junction box for FLIR FB-Series bullet camera mounts
- Weather-resistant enclosure protects field terminations
- Consolidates network + power + accessory connections
$174.00 $173.99 Save $0.01The item has been added -
FLIR
SKU: 4119468
FLIR PT Series Adapter Plate - 4119468
- Adapter plate for FLIR PT-Series pan-tilt cameras
- Standardized bolt pattern fits pole/wall/corner mounts
- Powder-coated aluminum/stainless for outdoor weather
$127.00 $126.99 Save $0.01The item has been added -
FLIR
SKU: CB-WLBX-31
FLIR Wall Junction Box for CB-31 Series - CB-WLBX-31
- Wall junction box for FLIR CB-31 series bullet cameras
- Conceals cable connections behind clean camera housing
- Powder-coated aluminum/stainless for outdoor weather
$114.00 $113.99 Save $0.01The item has been added -
FLIR
SKU: CB-WLBX-62
FLIR Wall Junction Box for FB-Series - CB-WLBX-62
- Wall junction box for FLIR FB-Series bullet cameras
- Conduit knockouts for code-compliant wiring through walls
- Powder-coated aluminum/stainless for outdoor weather
$174.00 $173.99 Save $0.01The item has been added -
Geovision
SKU: GV-CB550F3
Geovision GV-CB550F3 Junction Box
Junction box for Geovision IP cameras with IP66 cable protection
- IP66-rated housing seals cable connections against dust and direct water spray.
- Operates reliably from −30°C to +60°C, covering rooftop and eave mount extremes.
- Compact Ø100.5 × 56 mm form factor fits standard electrical enclosures and rails.
$36.53 $26.99 Save $9.54The item has been added -
GRI
SKU: 6600
GRI 6600 Junction Box
Corrosion-resistant junction box for AC/DC circuits, 10–14 AWG
- Junction box for ELK and 3rd-party security wiring termination
- Multiple knockouts and conduit entries for flexible cable routing
- Lifetime US-made warranty - includes mounting screws
$12.99The item has been added -
Add to Cart The item has been addedHanwha
SKU: SBD-110GP
Hanwha SBD-110GP Gangbox Mounting Plate (5-Pack)
Standardized gangbox plate for 25+ Hanwha camera models across 4 families
- Five plates per pack; works with QND, XND, HCD, and LND series cameras
- IP66 and IK10 rated for outdoor durability; operates -40°C to +55°C
- Reduces parts inventory and installation time on multi-camera deployments
In stock · Ships same business day$45.00 $44.99 Save $0.01The item has been added -
Add to Cart The item has been addedHanwha
SKU: SBD-110GP1
Hanwha SBD-110GP1 Universal Adapter Plate for IP Cameras
Universal adapter plate for 20 Hanwha IP camera models
- Compatible with QNV, QND, QNF, LND, QNE, and ANE series cameras
- White adapter plate with mounting hardware and installation guide included
- Durable construction for indoor and outdoor mounting applications
In stock · Ships same business day$20.00 $19.99 Save $0.01The item has been added -
Hanwha
SKU: SBD-137WMA
Hanwha SBD-137WMA Wall Adapter Plate White
White wall adapter plate for Hanwha dome cameras ø137.5mm
- Aluminum construction with RAL9003 white finish resists corrosion
- Circular ø137.5 × 6.7mm design enables rotational camera positioning
- TR20 mount screw compatibility with QNV-C8083R and QNV-C9083R models
$20.00 $19.99 Save $0.01The item has been added -
Hanwha
SKU: SBD-150GP
Hanwha SBD-150GP Adapter Plate for 4-Inch Octagon
150mm aluminum adapter plate for 4-inch octagon junction boxes
- Adapter plate for 4-inch octagon or 4-inch square J-box
- 150mm aluminum plate with RAL 9003 white finish
- TR20 screw spec + 120g weight for minimal ceiling load
$30.00 $29.99 Save $0.01The item has been added -
Hanwha
SKU: SBO-147BA
Hanwha SBO-147BA Conduit Hole Adapter
Aluminum conduit adapter for Hanwha X, Q, P, and Wisenet cameras
- Aluminum alloy construction with white finish for indoor/outdoor durability
- Integrates with standard conduit systems for organized cable protection
- Compact 35 × 123 × 35 mm form factor, lightweight at 0.21 kg
$20.00 $19.99 Save $0.01The item has been added -
Add to Cart The item has been addedHanwha
SKU: SBP-160HMW1
Hanwha SBP-160HMW1 White Cap Adapter
PF 1½" pole mount adapter for Hanwha XND/PND/XNV/XNF cameras
- Aluminum core with plastic cap resists corrosion at 320g total weight
- TR20 camera screw matches Hanwha dome and bullet mount bosses
- White finish (RAL9003) with compact Φ175×67mm profile for pole mount
In stock · Ships same business day$50.00 $49.99 Save $0.01The item has been added -
Add to Cart The item has been addedHanwha
SKU: SBP-300NB
Hanwha SBP-300NB Installation Box IP66 Weatherproof Enclosure
IP66 weatherproof box for SBP-300 modular cameras in outdoor sites
- IP66 rated; blocks dust and withstands high-pressure water jets
- Hybrid steel/aluminum construction at 3.4 kg enables single-person mount
- Compact 185×221×94.3 mm footprint fits tight wall and soffit spaces
In stock · Ships same business day$300.00 $224.99 Save $75.01The item has been added -
Add to Cart The item has been addedHanwha
SKU: SBP-301HMW3
Hanwha SBP-301HMW3 Cap Adapter
Aluminum 1.5" NPT cap adapter for pole and wall mount installations
- 1.5" NPT thread integrates directly with standard industrial mounting poles
- Aluminum construction resists corrosion in outdoor and high-humidity environments
- Lightweight 270g design with compact 155mm diameter fits tight ceiling spaces
$49.00 $48.99 Save $0.01The item has been added
Electrical & Power
Electrical and power components provide the foundation for reliable surveillance and access control system operation. Proper power delivery, distribution, and protection planning ensures stable performance and reduces system downtime in commercial environments.
Plan Your Deployment
- Voltage requirements and device compatibility
- Power budgeting across cameras and access devices
- Centralized vs distributed power design
- Surge protection and environmental safeguards
- Redundancy and uptime planning
Electrical & Power — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 10 working models of electrical & power sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Type | Accessory, Power Supply, IP Camera |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.