Dome Camera Covers & Replacement Domes | Commercial Surveillance

Plan Your Deployment

Compatibility with specific dome camera models
Clear vs tinted dome requirements
Impact resistance and vandal considerations
Optical clarity and image distortion factors
Routine maintenance and replacement planning

Showing Results for Dome Camera Covers

Compare

Out of stock
i-PRO

SKU: WV-CR1S

Panasonic WV-CR1S Smoke Dome Cover

Smoke dome cover with IR night vision for discreet i-PRO cameras
- UV-stabilized polycarbonate resists yellowing; maintains optical clarity outdoors
- IR-compatible design preserves night vision performance through tinted lens
- Sealed construction blocks dust, moisture, and contaminants from camera assembly
Special Order · Usually Ships in 2-3 Weeks

$66.99

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: D6220L-US

Pelco D6220L-US Spectra Enhanced 1080p PTZ Drive

1080p PTZ drive unit for Spectra Enhanced housing refresh or upgrade
- 20x optical zoom with 1080p resolution for mid-range surveillance coverage
- Pan-tilt-zoom mechanism with low-light performance for indoor deployments
- NDAA Section 889 compliant; 120V North American power variant
Special Order · Usually Ships in 2-3 Weeks

$1,223.99

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: DMSBL-1001

Pelco DMSBL-1001 Smoked Dome Bubble 4.7in

4.7" smoked dome bubble for Pelco housings, IK09 rated
- Smoked polycarbonate obscures lens direction for discreet surveillance
- IK09 vandal rating withstands harsh outdoor and high-traffic environments
- Reduced light transmission adds privacy layer and visual deterrence
Special Order · Usually Ships in 2-3 Weeks

$52.00 $41.99 Save $10.01

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: IMD1-INCLD0

Pelco IMD1-INCLD0 Smoked Lower Dome for Sarix

Smoked lower dome for Sarix ceiling cameras; obscures lens orientation
- Smoked tint hides sensor aiming angle from below; prevents blind-spot detection
- PoE++ powered; integrates directly with Sarix multi-directional in-ceiling systems
- IK10 vandal rated; trade-off reduces IR range and low-light sensitivity vs. clear dome
Special Order · Usually Ships in 2-3 Weeks

$77.55 $62.99 Save $14.56

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Pelco

SKU: IMD1-INCLD1

Pelco IMD1-INCLD1 Clear Lower Dome for Sarix Multi-Directional Cameras

Clear polycarbonate lower dome for Sarix multi-directional cameras
- IK10 vandal rating withstands 20J impact in high-traffic areas
- IR-optimized at 850nm for full night vision range without tint loss
- Fits Pelco Sarix in-ceiling camera systems with maximum light transmission
In stock · Usually Ships Same Business Day

$77.55 $62.99 Save $14.56

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Pelco

SKU: IMD1-SPLD0 RB

Pelco IMD1-SPLD0 RB Smoked Dome Replacement

Smoked dome replacement for Pelco Sarix Multi with IR pass-through
- IK09 impact-rated smoked polycarbonate obscures lens direction
- Maintains IR transmission for 24/7 night vision operation
- Genuine OEM part for Sarix Multi surface and pendant mounts
In stock · Usually Ships Same Business Day

$146.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Pelco

SKU: IMD1-SPLD0

Pelco IMD1-SPLD0 Smoked Dome Sarix Multi Pendant

Smoked dome for Sarix Multi pendant cameras with IK10 vandal rating
- Amber-tinted polycarbonate obscures sensor direction while maintaining IR transmission
- IK10 rating withstands 5 kg steel ball drops from 1.25 m without penetration
- PoE++ powered; compatible with Pelco Sarix Multi surface-mount and pendant models
In stock · Usually Ships Same Business Day

$175.72 $140.99 Save $34.73

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Pelco

SKU: IMD1-SPLD1

Pelco IMD1-SPLD1 Clear Dome for Sarix Multi Surface Cameras

Clear dome for Sarix Multi Pro cameras; IK10 rated, max IR pass-through
- IK10 vandal rating withstands 20-joule direct impact without cracking
- Optical-grade clear dome maximizes 850nm IR transmission for night imaging
- Works with 1/2.8" CMOS sensor; supports 0.018 lux low-light performance
In stock · Usually Ships Same Business Day

$175.72 $140.99 Save $34.73

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: IMF-LD1

Pelco IMF-LD1 Clear Lower Dome 3-Pack

Clear replacement dome 3-pack for Pelco IMF fisheye cameras
- Optical-grade dome transmits visible light and infrared for 24/7 panoramic coverage
- 3-pack enables scheduled maintenance and emergency replacement on 360° systems
- Compatible with Pelco IMF Series fisheye camera systems
Special Order · Usually Ships in 2-3 Weeks

$110.19 $88.99 Save $21.20

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: LD-SP8-CLR

Pelco LD-SP8-CLR Clear Dome Bubble for SPDE8

Clear replacement dome for Pelco SPDE8 PTZ cameras with full IR transmission
- Optical-grade clear material maintains image clarity and infrared performance
- Designed as scheduled maintenance consumable for SPDE8-series deployments
- Compatible with Pelco SPDE8 PTZ dome camera systems only
Special Order · Usually Ships in 2-3 Weeks

$80.00 $64.99 Save $15.01

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: LD-SP8-SMK50

Pelco LD-SP8-SMK50 Smoked Dome Bubble for SPDE8

50% smoked dome bubble for SPDE8 PTZ—conceals aim without light loss
- 50% tint obscures lens orientation while maintaining 50% light transmission
- Polycarbonate construction fits Pelco SPDE8-series cameras directly
- NDAA Section 889 compliant for government and regulated deployments
Special Order · Usually Ships in 2-3 Weeks

$80.00 $64.99 Save $15.01

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: LD7AF-1

Pelco LD7AF-1 Spectra 7 4K Clear Dome Bubble

Clear acrylic dome replacement for Spectra 7 4K indoor pendant
- Clear acrylic construction maintains visible and infrared light transmission
- White pendant trim matches Spectra 7 4K indoor installations
- Direct replacement for scratched, crazed, or damaged dome bubbles
Special Order · Usually Ships in 2-3 Weeks

$318.32 $255.99 Save $62.33

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: LD7F-0

Pelco LD7F-0 Spectra 7 Smoked Lower Dome Bubble

Smoked dome bubble for Spectra 7 PTZ—conceals lens direction
- Fits Spectra 7 indoor PTZ cameras with white trim rings; drop-in install
- Smoked polycarbonate obscures camera movement from floor-level view
- NDAA Section 889 compliant; test light transmission in your environment
Special Order · Usually Ships in 2-3 Weeks

$227.05 $181.99 Save $45.06

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: SRXP4-LD-0E

Pelco SRXP4-LD-0E Smoked Lower Dome for Sarix Pro 4

Smoked lower dome for Sarix Pro 4 with IK09 vandal rating
- Smoked polycarbonate obscures camera aiming direction for discreet deployment
- IK09 vandal rating withstands impact in outdoor security applications
- Direct replacement for Sarix Pro 4 Environmental dome camera systems
Special Order · Usually Ships in 2-3 Weeks

$35.00 $28.99 Save $6.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Pelco

SKU: SRXP4-LD-0I

Pelco SRXP4-LD-0I Smoked Lower Dome for Sarix Pro 4

Smoked dome for Sarix Pro 4 indoor cameras—obscures lens direction
- Smoked polycarbonate reduces light transmission while maintaining image quality
- IK09 impact rating withstands 20-joule vandal strikes indoors
- Direct fit replacement for Sarix Pro 4 indoor dome camera body
In stock · Usually Ships Same Business Day

$35.00 $28.99 Save $6.01

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: SRXP4-LD-1E

Pelco SRXP4-LD-1E Clear Lower Dome Sarix Pro 4

Clear replacement dome for Sarix Pro 4 with IK09 vandal protection
- Clear polycarbonate window maximizes light transmission for optimal image quality
- IK09 vandal rating withstands high-impact environments and physical contact
- Outdoor-rated design protects camera optics from dust, contamination, and weather
Special Order · Usually Ships in 2-3 Weeks

$35.00 $28.99 Save $6.01

Add to Cart
The item has been added

What to Look For When Buying

The decisions that matter most before you spec.

Optical Clarity & Image Quality Retention

Scratched, clouded, or degraded dome covers directly degrade image sharpness and color accuracy, especially in identification-critical deployments. Replacement with optically-correct polycarbonate or acrylic restores the original lens-to-sensor light path. See why surveillance systems fail during incidents for how optical degradation compounds under stress.

UV & Environmental Durability

Unprotected polycarbonate yellows and becomes brittle under direct UV exposure, reducing transmission and increasing reflective glare. UV-stabilized domes maintain clarity for 5–10 years in outdoor installations. Smoked variants also reduce thermal stress on internal optics in high-heat environments.

Material Selection: Polycarbonate vs. Acrylic

Polycarbonate offers superior impact resistance and flexibility for vandal-prone sites; acrylic delivers higher optical clarity for precision identification tasks. Thickness (typically 3–6mm) determines both protection level and optical distortion trade-offs.

OEM Fit & Compatibility Verification

Non-OEM domes may introduce optical misalignment, vignetting, or mechanical play that degrades pixel density and DORI distance. Always confirm camera model, mount type (threaded, bayonet, clip-ring), and optical prescription match before ordering.

Maintenance & Inspection Protocols

Dome covers should be inspected quarterly in outdoor and high-traffic settings for cracks, haze, and contamination buildup. Budget replacement domes as consumable maintenance items in multi-year surveillance contracts to prevent silent image degradation.

Integration with Full Camera Protection Strategy

Dome covers work best alongside camera housings, sun and weathershields, and lens protectors to create layered defense against environmental and physical threats.

Technology Stack

The specs and acronyms that actually affect dome camera covers performance.

Polycarbonate Construction

Thermoplastic polymer with exceptional impact resistance and flexibility. UV-stabilized formulations resist yellowing and embrittlement under continuous sun exposure. Typical thickness 3–6mm; thicker domes provide better vandal resistance but introduce slight optical distortion at edges.

Acrylic (PMMA) Composition

Optical-grade thermoplastic offering superior clarity and lower chromatic aberration than polycarbonate. More brittle and scratch-prone; best suited for indoor or protected environments where optical precision outweighs durability needs.

Optical Transmittance (%)

Percentage of visible light transmitted through the dome without reflection or absorption loss. High-clarity domes maintain 88–92% transmittance; smoked variants drop to 60–75% to reduce glare. Directly affects low-light performance and color accuracy.

Anti-Glare & Anti-Reflective Coatings

Hard-coat or multi-layer treatments reduce surface reflections and internal light scatter. Improves contrast and reduces backlight washout in high-ambient-light scenarios; trade-off is slightly lower raw transmittance and increased cost.

Impact Resistance Rating (Drop Test)

Measured in joules or by drop height (typically 1–3m onto steel). Higher ratings indicate ability to survive impacts from tools, stones, or blunt trauma in vandal-prone deployments without cracking or crazing.

Thermal Expansion Coefficient

Rate at which dome material expands/contracts with temperature swings. Mismatched coefficients between dome and housing can cause mechanical stress, light leaks, or moisture ingress in extreme climates. Spec-matched OEM domes eliminate this risk.

Typical Deployment Scenarios

Retail Entrance & Checkout Protection

Mid-size retail chain with 30–50 indoor turret/mini-dome cameras requiring IP cameras at entry, checkout, and inventory zones. Dome covers protect optics from dust, humidity, and handling damage during weekly cleaning cycles. Replace covers every 2–3 years; stock 10–15 spares to minimize downtime during incident review.

Outdoor Perimeter Deployments

Industrial facility with 60+ outdoor vandal-dome cameras on 8–12m poles. Select UV-stabilized, smoked-polycarbonate domes to resist glare, thermal stress, and environmental contamination. Implement annual inspection & replacement schedule to prevent silent image degradation. Coordinate with infrastructure upgrades to PoE power delivery.

Multi-Site School Campus Surveillance

K–12 district rolling out 200+ surveillance cameras across elementary, middle, and high schools. Use campus-wide design approach with standardized clear-polycarbonate domes for indoor classrooms and hallways, and vandal-resistant variants for exterior building facades. Centralize spare-parts inventory (50–100 domes) at district office for rapid on-site replacement.

Hospital & Secure Facility Interior Coverage

Healthcare or secure facility with 100+ recessed/flush-mount domes in sensitive areas (ICU, pharmacy, secure corridors). Select low-profile protective covers with minimal optical distortion to preserve high-resolution identity and behavioral analytics. Implement cleanroom-compatible installation protocols to avoid contamination during maintenance.

Frequently Asked Questions

How do I know which dome cover is compatible with my camera?

Check your camera model's datasheet for the dome diameter, mount type (threaded bayonet, snap-ring, or clip), and focal-length prescription. Cross-reference with OEM part numbers or contact our surveillance experts with your camera model and housing manufacturer. Non-matching domes can introduce vignetting or light leaks.

Can I use a universal dome cover instead of an OEM replacement?

Universal domes are cost-effective but often introduce optical misalignment, edge distortion, or mechanical play that degrades image quality and DORI performance. OEM domes are optically-matched and mechanically-fitted; they cost 10–20% more but eliminate image degradation and warranty conflicts.

How often should dome covers be replaced or cleaned?

In indoor, clean environments, inspect domes annually and clean with soft cloth and distilled water. Outdoor installations should be inspected quarterly and replaced every 3–5 years depending on UV exposure and environmental contamination. High-traffic or vandal-prone sites may need annual replacement.

What's the difference between clear, smoked, and tinted domes?

Clear domes maximize light transmittance (88–92%) for low-light and night-vision performance. Smoked/gray domes reduce glare and improve contrast in high-ambient-light environments but drop transmittance to 60–75%, slightly reducing night performance. Tinted variants are application-specific; choose based on your lighting conditions and DORI requirements.

Do dome covers affect camera resolution or field of view?

Properly-fitted OEM domes have zero impact on resolution or FOV; they are part of the original optical design. Mismatched or low-quality aftermarket domes can introduce chromatic aberration, vignetting (dark corners), or subtle edge distortion that degrades image sharpness and identification distance. Always verify optical prescription match.

How do I integrate dome cover maintenance into my surveillance contract?

Include dome inspection and replacement as a scheduled maintenance line item (typically quarterly for outdoor, semi-annually for indoor). Budget 20–50 replacement domes per 100-camera installation per year. Coordinate with incident-readiness protocols to ensure optical clarity is maintained during high-stakes monitoring periods.

Dome Camera Covers

Plan Your Deployment

Showing Results for Dome Camera Covers

Panasonic WV-CR1S Smoke Dome Cover

Pelco D6220L-US Spectra Enhanced 1080p PTZ Drive

Pelco DMSBL-1001 Smoked Dome Bubble 4.7in

Pelco IMD1-INCLD0 Smoked Lower Dome for Sarix

Pelco IMD1-INCLD1 Clear Lower Dome for Sarix Multi-Directional Cameras

Pelco IMD1-SPLD0 RB Smoked Dome Replacement

Pelco IMD1-SPLD0 Smoked Dome Sarix Multi Pendant

Pelco IMD1-SPLD1 Clear Dome for Sarix Multi Surface Cameras

Pelco IMF-LD1 Clear Lower Dome 3-Pack

Pelco LD-SP8-CLR Clear Dome Bubble for SPDE8

Pelco LD-SP8-SMK50 Smoked Dome Bubble for SPDE8

Pelco LD7AF-1 Spectra 7 4K Clear Dome Bubble

Pelco LD7F-0 Spectra 7 Smoked Lower Dome Bubble

Pelco SRXP4-LD-0E Smoked Lower Dome for Sarix Pro 4

Pelco SRXP4-LD-0I Smoked Lower Dome for Sarix Pro 4

Pelco SRXP4-LD-1E Clear Lower Dome Sarix Pro 4

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Dome Camera Covers

Frequently Asked Questions

Related Categories

Engineering Reading