Cables
Sub categories
Showing Results for Cables
-
Add to Cart The item has been addedAxis
SKU: 01996-001
Axis 01996-001 RJ45 Field Connector 10-Pack
Tool-free RJ45 field connectors, 10-pack, PoE 802.3af/at/bt rated
- No crimper needed—snap connectors on-site in seconds for faster deployment
- Handles PoE power delivery up to 90W; works with 802.3af, 802.3at, 802.3bt
- IP65-rated, corrosion-resistant housing survives outdoor moisture and salt air
In stock · Ships same business day$139.00 $133.99 Save $5.01The item has been added -
Axis
SKU: 5801-741
Axis 24V DC/24-240V AC Power Cable 22m 5801-741
22m power cable for Axis PTZ cameras, 24V DC/240V AC dual voltage
- 22-meter reach with 12AWG copper wire for efficient long-distance power delivery
- Dual voltage support handles 24V DC and 24-240V AC installations
- PVC-free TPE jacket rated to 90°C, UL20626 certified for outdoor use
$219.00 $211.99 Save $7.01The item has been added -
Axis
SKU: 5506-191
Axis 5506-191 5-Meter Multicable with Power, Audio, and I/O
5-meter multicable combines power, audio, and I/O in one connector
- Single cable run eliminates three separate installations for power, bidirectional audio, and alarm I/O
- 16.4 feet reaches typical compact spaces—hallways, aisles, retail without extra splitters
- Compatible with Axis surveillance cameras using multi-connector receptacles
$159.00 $153.99 Save $5.01The item has been added -
Add to Cart The item has been addedAxis
SKU: 01590-001
Axis T8355 Digital Audio Extension Kit - 01590-001
Extend AXIS T8355 microphone 100m over network cable with digital audio
- 100-meter range via standard Cat5e/Cat6 without dedicated audio cabling
- Single network cable carries both power and digital signal to microphone
- Digital signal resists EMI from power cables and RF interference
In stock · Ships same business day$20.00 $19.99 Save $0.01The item has been added -
Hanwha
SKU: SPP-C7400
Hanwha SPP-C7400 Audio and Alarm Cable
Multi-conductor audio and alarm cable for 11 Hanwha camera models
- Dual audio transmission and alarm I/O routing in one cable run
- Pre-assembled connectors for quick installation across TNV, QNV, XNV, XND
- High-quality construction rated for indoor and outdoor surveillance setups
$45.00 $44.99 Save $0.01The item has been added -
i-PRO
SKU: WV-QCA501A
i-PRO WV-QCA501A I/O Multi Cable for Network Cameras
I/O multi cable for i-PRO dome cameras with 12VDC power and audio
- Consolidates power, audio, and control signals in single cable run
- 12VDC power support simplifies wiring for centralized or PoE setups
- HTTPS encryption protects configuration and firmware updates in transit
$79.02 $78.99 Save $0.03The item has been added -
Add to Cart The item has been addedUbiquiti
SKU: U-CABLE-PATCH-0.3M-RJ45-BK
Ubiquiti U-Cable-Patch-03M-RJ45-Bk - U-CABLE-PATCH-0.3M-RJ45-BK
0.3M Cat6 patch cable for tight rack and wall-mount spaces
- 0.3 m length eliminates cable slack in dense racks and wall-mount AP installs.
- Cat6 supports 10 Gbps short-run throughput, well above 1 Gbps switch uplink demand.
- Carries 802.3af (13 W) and 802.3at (30 W) PoE alongside data on a single run.
$3.99The item has been added -
2N
SKU: 02319-001
2N NVT PL-08 Network Adapter 6-Pack - 02319-001
Six-pack 2N NVT PL-08 adapters for multi-site access control rollouts
- 6-pack of NVT PL-08 network adapters for bulk install
- PoE 802.3af passes through each adapter to the device
- Built for enterprise and chain-store rollouts
$879.00 $851.99 Save $27.01The item has been added -
ACTi
SKU: EPR5A31024-000
ACTi HDMI Cable - 30FT - EPR5A31024-000
- 30-foot reach connects recorders to monitors without repeaters or active hardware.
- HDMI connectivity supports direct integration with ACTi recorders and compatible displays.
- Route away from power lines and EMI sources to maintain signal integrity over full length.
$109.00 $108.99 Save $0.01The item has been added -
ACTi
SKU: ERE032720
ACTi THE Enterprise Dovetail Power Cable Connects - ERE032720
- Proprietary dovetail connector locks securely, preventing accidental disconnection post-install.
- Engineered exclusively for ACTi THE Enterprise camera series, eliminating compatibility guesswork.
- Mechanical locking interface maintains reliable power in high-traffic retail, healthcare, and education sites.
$86.90 $85.99 Save $0.91The item has been added -
Add to Cart The item has been addedAxis
SKU: 01706-001
Axis 01706-001 Male Coupler 1.5" NPS/NPT
1.5" male coupler connects modern Axis pendant kits to legacy mounts
- 1.5" NPS/NPT male thread fits existing female ports on older infrastructure
- Aluminum with black anodized finish resists corrosion in humid or coastal environments
- Included lock nut prevents vibration loosening during operation
In stock · Ships same business day$52.00 $51.99 Save $0.01The item has been added -
Add to Cart The item has been addedAxis
SKU: 01714-001
Axis 01714-001 Terminal Block to 3.5mm Audio Extension
Terminal block to 3.5mm audio conversion for Axis IP cameras
- Passive design connects professional screw terminals to standard 3.5mm jacks
- Supports mono and stereo audio with no external power required
- IP65 rated housing withstands 24/7 security deployments in varied conditions
In stock · Ships same business day$11.00 $10.99 Save $0.01The item has been added -
Axis
SKU: 01845-001
Axis 01845-001 EX d Cable Gland M20
M20 EX d cable gland for flameproof enclosures in hazardous areas
- EX d M20 cable gland for hazardous-area enclosures
- Flameproof construction for ATEX explosive atmospheres
- Non-armored cable entry for intrinsically safe runs
$339.00 $327.99 Save $11.01The item has been added -
Axis
SKU: 03057-001
Axis 03057-001 Explosion-Protected Cable Gland
M20 explosion-protected cable gland for hazardous gas/dust zones
- Explosion-protected cable gland for hazardous-location camera installs
- Maintains explosion-proof seal at the cable entry point
- Built for chemical plants, refineries, and energy sites
$129.00 $124.99 Save $4.01The item has been added -
Axis
SKU: 03058-001
Axis 03058-001 Explosion-Protected Cable Gland M25
M25 explosion-protected cable gland for hazardous gas and dust areas
- M25 explosion-protected cable gland for armored cable
- ATEX II 2G + 1D Ex db IIC + Ex ta IIIC Da certified
- PESO and INMETRO regulatory compliance for global use
$134.00 $128.99 Save $5.01The item has been added -
Axis
SKU: 03075-001
Axis 03075-001 Explosion-Protected Cable Gland
M20 explosion-protected cable gland for hazardous atmosphere zones
- M20 explosion-protected cable gland for hazardous areas
- Non-armored cable design for confined enclosure runs
- Multiple international certifications for global use
$99.00 $95.99 Save $3.01The item has been added
Cables
Cables form the backbone of surveillance, access control, and intercom systems. Selecting the correct cable type and rating ensures reliable data transmission, proper power delivery, and long-term system stability in commercial deployments.
Plan Your Deployment
- Ethernet, fiber, or specialty cable requirements
- Distance limitations and signal integrity planning
- Indoor, outdoor, or plenum-rated environments
- Shielded vs unshielded cable considerations
- Future expansion and structured cabling design
Cables — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 550 working models of cables sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 2MP, 0MP |
| IP Rating | IP65, IP66, IP67 |
| Connectivity | Bluetooth, Wired, Wi-Fi |
| Power | AC/DC, PoE, PoE+ |
| Storage | microSD |
| Type | Cable, Accessory, Scanner, Mobile Computer, Reader, Power Supply, Dome, Wireless Bridge |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.